Product#: EP1900

EPAS Performance Hydroelectric Power Steering Pump System

EPAS Performance Hydroelectric Pump System. This system has a program that works with an angle sensor and CAN protocol. The converter talks to the pump via the angle sensor, ramping up the systems pressure as needed. There is...

Product#: 8060350

Big Block Power Steering Pump Kit With Brackets

Unisteer Power Steering Conversion Kit - Part # 8060350. Upgrade your steering performance with the Unisteer Power Steering Conversion Kit. Designed to replace outdated factory steering components, this system delivers modern...

Product#: NP6122

1963-74 Chrysler, Dodge, Plymouth; Saginaw Power Steering Pump; with Reservoir; 8 Cyl.; 400ci, 440ci; New; Various Models

If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...

Product#: 1253580

1960-77 GM, Chrysler, Dodge, Plymouth; Power Steering Fitting; with Saginaw PS Pump; Cad Plated; Various Models

Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...

Product#: 1253570

1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish

This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...

Product#: 1253531

1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style; for Saginaw Pumps

Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...

Product#: 1253532

1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style; Various Models

Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...

Product#: 1253550

1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft

This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...

Product#: 7834183

1961-2005 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap

Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...

Product#: 1253573

1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts

This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...

Product#: A15650

5/16"-24 Grade 8 Hex Nut Zinc; Each

5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...

Product#: 1253575

1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit

Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...

Product#: D41211

Universal GM Saginaw Type II Power Steering Pump Outlet Fitting

Stock outlet fitting for a GM Saginaw Type II power steering pump. Features: Male end is M16 x 1.5 threads Female end is M16 x 1.5 threads Use with Saginaw Type II power steering pump

Product#: 1253574

1962-02 GM, Chrysler Dodge, Plymouth; Saginaw Power Steering Pump Stud And Bolt Kit; with Chrome Plated Bolts

This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...

Product#: 1253571

1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish

This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...

Product#: 71224

Universal Power Steering Return Hose; wthout Fittings; 3/8" x 24"; Cut to Fit

Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...

Product#: HK12574S

GM Rack and Pinion and Power Steering Box Power Steering Hose PR Stainless Steel

Our Power Steering Conversion Hose kit is designed to fit the GM Saginaw power steering pump with inverted flare pressure fitting. It fits POL Rack and Pinion and the GM 500, 605, 800 and 600 Series power steering gear box!...

Product#: 71350

Power Steering Return Hose; wthout Fittings; 3/8" x 48"; Cut to Fit; Various Models

Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...

Product#: 71236

Universal Power Steering Return Hose; wthout Fittings; 3/8" x 36"; Cut to Fit

Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...

Product#: 8020630

Power Steering Pump Pulley; For Saginaw Pump; 4-7/8" Diameter

Made from billet aluminum and polished for that show-quality finish, these Unisteer power steering pulleys are visible standout pieces on any engine. This is for Saginaw style power steering pumps. This is a press on style...

Product#: MN7509

1966-76 Chrysler, Plymouth, Dodge; Power Steering Plunge Joint Housing

Plunge Joint housing is for 1966-76 Chrysler models and Dodge, Plymouth A/B/C/E/F-body models. This is the coupling front the steering column to the power steering gear box. Note: If converting from manual steering to power...

Product#: B77910B

Billet Specialties Billet Aluminum Remote Mount Power Steering Reservoir - Smooth Black

Billet aluminum remote mount power steering reservoirs from Billet Specialties. Features a double O-ring sealed breathable cap and an internal return tube to prevent foaming. Includes the bracket and stainless steel mounting...

Product#: YC110712

1963-74 AMC/GM; Power Steering Pump Without Reservoir; New

If you're looking for a replacement power steering pump, now you can replace it with a brand-new OER Authorized pump that has been manufactured to meet the highest OEM standards of quality. This brand new power steering pump...

Product#: MN7505

1962-76 Chrysler, Plymouth, Dodge; Power Steering Box (14:1 Ratio); 1-1/8" Shaft; Conversion

MN7507 Mopar vibration reducing universal joint coupling to the shortened steering column shaft. Drill bit and pins included with coupler. Use MN7508 hose set for Saginaw pumps. Popular Applications: 1962-72 Chrysler C-body...

Product#: NP6159

1969-74 Chrysler, Dodge, Plymouth; Saginaw Power Steering Pump; with Reservoir; 225, 318, 340, 360, 400New

Reproduction style power steering pump designed for use with various 1969-74 Chrysler, Dodge, Plymouth models with 225, 318, 340, 360 engines. If you're looking for a power steering pump for your classic vehicle and are...

Product#: PS298

Universal Aluminum Inline Power Steering Filter With Magnet For 3/8" ID Line

Universal inline power steering filter for 3/8 low pressure line. The filter housing is manufactured from high quality aluminum to last the life of your vehicle. Internally it features a metal screen and magnet to capture...

Product#: 23C

1958-82 Buick, Chevy, Olds, Pontiac; Power Steering Return Hose Clamps; Pair

Superb quality reproduction of the original power steering return hose clamps designed for use with various 1958-82 GM models with power steering. Each clamp is cosmetically correct and manufactured to factory specifications...

Product#: PS20038F

3/8" Magna-Pure Power Steering Filter

In-line Magna-Pure Filter - Serviceable Magnetic filter element with patented built in bypass for optimal performance; filters up to 190 micron particles. Protects the entire steering system from contmination. Flushing the...

Product#: 96140

1961-74 GM, 1968-74 AMC, 1963-74 Mopar; Saginaw Type Power Steering Pump; w/o Reservoir; New

OER Authorized power steering pump for use with various 1961-74 AMC, GM, and Mopar models with a Saginaw style power steering pump. Each pump is manufactured to correct OEM standard of quality. This new power steering pump is...

Product#: AE81214

Alter Ego 812 Series; Insulated Billet Aluminum Line Clamp; 4 Hole/Separator; 3/16" to 3/8"

Alter Ego 812 Series insulated billet aluminum line clamp/separator with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...

Product#: AE156203

Alter Ego 1562 Series; Insulated Billet Aluminum Line Clamp; 3 Hole; 1/2" to 1-1/8" OD

Alter Ego 1063 Series insulated billet aluminum panel mount line clamps with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...

Product#: MD47279

1968-76 Dodge, Plymouth; Saginaw Power Steering Pump Mounting Hardware Set

This steering pump hardware set can be used to install most Saginaw power steering pumps for 1960-76 Didge and Plymouth models as listed. Comes complete with all the bolts, washers, and nuts required to mount the power...

Product#: 2537227

1967-74 Dodge, Plymouth; Power Steering Pressure Control Valve Body; 3/8" Dia. Return Hose

Authentic reproduction of the original power steering pressure control valve return fitting for the steering sector on 1967-74 various Dodge and Plymouth models. The return hose of the power steering pump attaches to this...

Product#: MN7507

1962-82 Chrysler, Plymouth, Dodge; Steering Coupler Kit

Steering universal joint & vibration reducer in steel. Couples stock Mopar steering columns to MN7505 and MN7506 Mopar power steering boxes. Stock column must be cut and shortened for installation. Includes drill bit and roll...

Product#: PS6122

1969-72 Mopar Saginaw Style Power Steering Pump with Reservoir

If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

Product#: MD2603

1970- 76 Mopar Small Block Saginaw Power Steering Pump Brackets

These power steering pump brackets are designed for 1970-76 Mopar small block engines, fit both styles of Saginaw pumps and are compatible with or without AC applications. Must have an aluminum water pump. Includes correct...

Product#: MN7508

1962-76 Mopar A/B/E Bodies W/ V8 Engs - Power Steering Hose Conversion Set (Saginaw To Mopar)

2 Piece OEM style rubber power steering hose kit. Connects Saginaw power steering pump to Mopar power steering box MN7505 and MN7506. V-8 applications only. Applications: 1962-76 A/B/E-body with MN7505 or MN7506 power...

Product#: PS6159

1962-74 Chrysler/Plymouth/Dodge; Saginaw Power Steering Pump; With A-Shaped Reservoir; Reman

If you're in the market to replace the worn out, damaged or missing power steering pump, choose this power steering pump that is thoroughly remanufactured, carefully inspected and restored to OEM functionality! Product Specs:...

Product#: MN7506

1962-82 Chrysler, Plymouth, Dodge A/B/C/E-Body; Power Steering Box (14:1 Ratio); 1-1/4" Shaft

A modern power steering box for the 1962-1982 Chrysler, Plymouth, Dodge models. This box fits both factory power & manual steering cars. The Borgeson conversion box offers a 14:1 quick ratio, firm modern power steering feel,...

Product#: MD2675

1964-69 Dodge/Plymouth "LA" Small Block Saginaw Power Steering Pump Brackets

These power steering pump brackets are designed for 1964-69 Chrysler small block engines, fit both styles of Saginaw pumps and are compatible with or without AC applications. Must have a cast iron water pump. Includes correct...

Product#: MN7510

1967-76 A/B/E-Body Power Steering Return Nipple - 3/8"

Note: 1966 and earlier Steering Gears had Nipples that were 1/2" and/or 5/8". You may receive a nipple either straight, or 45 degree, depending on supplies available. Applications: 196 7-76 A/B/E-Body with power steering

Product#: MD47207

Mopar Small Block With Saginaw Pump Bolt /Spacer Set

If your Mopar small block has a Saginaw pump but no power steering pulley, this special bolt and spacer set is the solution! This set mounts big block power steering pulleys: MD2381, MD2382, MD2383, and MD2384 on your small...

Product#: PSCK6272

1962-72 Mopar; Power Steering Conversion Set; Small Block; 1-1/8" Output Shaft

The gear box fits both factory power & manual steering cars. This conversion box offers a 14:1 quick ratio power box. This box bolts directly to the stock K-member mounting location. Power steering pump bracket for attaching...

Product#: MD2602

1969-76 Mopar Big Block Without AC Saginaw Power Steering Pump Bracket Set

These power steering pump brackets are designed for 1969-76 Mopar big block engines and fit both styles of Saginaw pumps. Includes correct hardware to mount brackets to the power steering pump and attach the assembly to the...

Product#: EP3001

1962-76 Dodge, Plymouth B- Body; EPAS Performance Electric Power Assisted Steering Kit; w/ Manual Adjustment Controller

EPAS Power Steering Kit for 1962-76 Dodge and Plymouth B-Body models. This complete kit includes a 60 amp electric motor unit, a prewired control module, and all the necessary hardware for installation. Features a built in...

Product#: MN7512

1962-76 Saginaw Power Steering Pump Pulley Retaining Nut

Most people think this is a regular nut that can be found anywhere. Then they find out it isn't! This is a special nut that is very hard to come by or find. It is manufactured to solve this issue.

Product#: MD2604

1964-69 Mopar Small Block Trw / Thompson Power Steering Pump Bracket Set

These power steering pump brackets are designed for 1964-69 small block LA engines with cast iron water pump housings and TRW or Thompson pumps. Can be used with or without AC applications. Includes correct hardware to mount...

Product#: MD2181

Non Date Coded Power Steering Return Hose Set

Reproduction non-date coded power steering return hose for your Mopar. Includes the correct style 18" hose and 2 correct clamps.

Product#: MD2187

1967-72 Mopar Big Block & Hemi Federal Power Steering Bracket Set

Replacement federal power steering brackets for 1967-72 Big Block and Hemi engines with aluminum water pumps. These are for A/C and non-A/C applications. Replace those old rusted or missing brackets with new reproduction...

Product#: MD2382

Mopar B / Rb / Hemi Engine Chrome Saginaw Keyed Power Steering Pulley

Having trouble finding the correct Mopar pulleys to complete your motor? We have the answer! This replacement pulley is available in original Chrysler styles for all popular engines, including big block combinations and for...

Product#: MD47281

Reilly Braided Stainless Power Steering Hose Kit For Alterkation Subframes

This Braided Stainless Power Steering Hosekit is designed for use on the Reilly AlterKation subframes for A/B/E body models. This kit has the hoses and fittings to connect the Saginaw pump to the power steering rack. Kit is...

Product#: MD2196

1966-69 Mopar Big Block Trw Power Steering Brackets

Replacement for TRW power steering brackets for 1966-69 Big Block and Hemi engines. These are for non-A/C applications. To correctly use these brackets, the TRW pump must have a reservoir body to rear pulley face distance of...

Product#: MD2182

1968-74 Mopar A / B / E-Body Power Steering Return Hose Clamps - 5/8"

Replacement for the power steering return hose clamps for 1968-74 A, B and E-body models. These clamps have the correct red color as the original for those added judging points. Sold as a pair.

Product#: PS177

1968-74 Mopar; 5/16" Power Steering Pressure Fitting

Product#: 70333

1968 Mopar with Chrysler or Federal Pump Power Steering Pressure Hose

A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. Replace your worn...

Product#: MD2171

May 1968 Date Coded Power Steering Return Hose Set

Reproduction date coded power steering return hose for your Mopar. Includes the correct style 18" hose and 4 correct clamps. Replace that old cracked return hose with an authentic reproduction part. Mopar Authe ntic...

Product#: MD2172

October 1968 Date Coded Power Steering Return Hose Set

Reproduction date coded power steering return hose for your Mopar. Includes the correct style 18" hose and 4 correct clamps. Replace that old cracked return hose with an authentic reproduction part. Mopar Authe ntic...