Product#: K51498

Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51499

1958-69 Trunk Spatter Paint; Black / Aqua; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51496

1970-1982 GM: Trunk Spatter Paint; Black / Gray; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51497

Trunk Spatter Paint Clear Topcoat; 16 Oz Aerosol Can; Net Wt. 16 Oz.

After years of use your trunk area is probably in poor condition due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. This is the...

Product#: *K51491

OER Black and Aqua Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51495

OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51493

OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51494

OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51492

OER Gray and White Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51490

OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...

Product#: 9781957

1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-3/4", Large

Correct reproduction rubber lug wrench sleeve for the tirejack and wrench assembly. This special rubber storage sleeve was found originally on many GM car models. Manufactured from quality rubber material, this sleeve slides...

Product#: K1088

1967-81 Camaro, Firebird; Jack Handle; Lug Nut Wrench; 3/4"

Reproduction of the original lug nut wrench and jack handle designed for use with 1967-81 Camaro and Firebird models with 3/4" hex head lug nuts. This handle is also used to operate the tire jack. Manufactured in quality...

Product#: B10891

1/4-20 x 5/8 Hex Head SEMS Machine Screw,.750 Toothed Washer

Reproduction of the original 1/4-20 x 5/8 hex head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...

Product#: TR1200

Lokar Trunk Release Cable Set Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: CHT1300

Lokar Hood/Trunk Release Cable Set Stainless Steel

Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire. Hood...

Product#: TR1200B

Lokar Trunk Release Cable Set Black Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: UTC1415CF

Universal Spare Tire Cover 14" / 15" Crowsfeet Pattern Design; Gray / Black

Reproduction style spare tire cover for use with all 1960s, and 1970s GM models that included a 14" or 15" spare tire. This universal style spare tire cover is manufactured in a gray and black Crowsfoot design pattern that...

Product#: TB4

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; Black

Beautifully designed, hand-crafted black vinyl tote bag to stylishly store almost anything you need to keep in the trunk area. Constructed from durable black vinyl material, the use of this handy bag is a great way to clean...

Product#: DE010468

DEI Cool Tape Thermal Insulating Tape 2" x 30 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: FB1000

1" Foam Paint Brush

Product#: DE010408

DEI Cool Tape Thermal Insulating Tape 1 1/2" x 15 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: DE010416

DEI Cool Tape Thermal Insulating Tape 1 1/2" x 30 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: TB13

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; Ford Dark Speckled

Beautifully designed, hand-crafted Ford dark speckled pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed...

Product#: 45444A

1964-68 Ford Mustang; Metal Seat Trunk Divider; Coupe

Upgrade the rear interior structure of your classic with this heavy duty rear seat to trunk divider panel. Manufactured from durable 18 gauge steel, this panel provides a much stronger alternative to the original fiberboard...

Product#: 43200B

1966-72 Ford, Mercury; Trunk Latch Assembly; Various Models

Reproduction of the original trunk latch assembly used on various 1967-72 Ford and Mercury models as listed. Each latch is manufactured in high quality stamped steel and easily installs onto the trunk same as original....

Product#: 1462A

1963-83 Ford, Mercury; Spare Wheel Mounting Bolt Wing Nut; 3/8"

Reproduction of the original style spare tire wing nut use to hold your Mustang's spare wheel against the trunk floor. Will fit 1965-67 Mustang and a variety of other models. Ford Applications: 1960-1967 Ford Falcon 1968-1972...

Product#: TB11

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; Ford Small Plaid Pattern

Beautifully designed, hand-crafted Ford plaid pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed from the...

Product#: TB12

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; Ford Light Speckled Pattern

Beautifully designed, hand-crafted Ford light speckled pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed...

Product#: 42700A

1967-68 Ford Mustang; Fastback; Trunk Lid Hinges; EDP Coated; Pair

Reproduction trunk lid hinges for 1967-68 Mustang Fastback models. Each hinge is manufactured in quality stamped steel replicating the original configuration, appearance and fitment. Replace your worn out hinges with these...

Product#: 43252A

Ford Mustang/Mercury Cougar; Coupe/Convertible Trunk Lid Catch; EDP Coated

Reproduction of the original trunk lock catch for use with 1967-68 Ford Mustang and Mercury Cougar coupe or convertible models. Each catch is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 44890D

1967-68 Mustang; Trunk Torsion Rod; Coupe or Convertible

Reproduction of the original trunk torsion rods for use on 1967-68 Mustangs. Designed to connect the trunk door hinges, the rod acts like a spring keeping constant tension on the trunk lid when it is open. Sold in pairs....

Product#: 45028A

1964-68 Ford Mustang; Coupe/Convertible; Trunk Tension Rod Anti-Rattler Insulator

Correct reproduction of the original rubber sleeve that slides over and wraps around the trunk torsion rod(s), preventing vibration and rattling. Coupe and convertible models included 2 rods, fastbacks were designed with one...

Product#: 1424

1964-67 Mustang, Cougar, 1968-77 Bronco, Spare Wheel Mounting Plate; with Standard Wheels

Secure your spare tire properly with this quality reproduction spare wheel mounting plate for various 1964-67 Ford Mustang, 1967-69 Mercury Cougar, and 1968-77 Bronco models. Designed to work with the factory hold down bolt...

Product#: CB65101

1964-68 Mustang Coupe/Convertible; Solid Arm Billet Trunk Hinges; Steel Trunk; Natural Finish

Designed for use as a direct replacement, these hood hinges require no alterations for vehicle installation. The gas-charged springs are specifically calibrated for steel hoods to provide a smooth and effortless action...

Product#: CB65102

1964-68 Mustang Coupe/Convertible; Solid Arm Billet Trunk Hinges; Fiberglass Trunk; Natural Finish

Designed for use as a direct replacement, these hood hinges require no alterations for vehicle installation. The gas-charged springs are specifically calibrated for steel hoods to provide a smooth and effortless action...

Product#: JP1

Jack Pack Storage Bag; Plaid

An accessory for your trunk designed to hold a Mustang scissors jack and handle. May also be used for tool kit, flares, etc. Makes storage of your jack and handle an easier, neater job. Eliminates rattles. Made of durable...

Product#: JP2

1964-73 Mustang; Jack Storage Bag; Speckled Pattern Material

An accessory for your trunk designed to hold a Mustang scissors jack and handle. May also be used for tool kit, flares, etc. Makes storage of your jack and handle an easier, neater job. Eliminates rattles. Made of durable...

Product#: 43200F

1967-70 Ford Mustang; Remote Trunk Release Kit; Mechanical/Cable Type

Remote trunk release kit for use on 1967-70 Mustangs. This complete kit makes it easy for the driver to open the trunk with the pull of a handle from the inside. Comes complete with all the necessary hardware needed to...

Product#: TC1

Ford; Spare Tire Cover; 14"; Plaid

This reproduction tire cover will help dress your Mustang trunk interior. The plaid vinyl material will match other vinyl Trunk Mats and Jack-Paks we offer. Each tire cover features felt backing. Designed for use with 14"...

Product#: 43200D

1967-70 Ford Mustang; Electric Trunk Release Kit

Electric remote trunk release kit for use on 1967-70 Mustangs. This complete kit makes it easy for the driver to open the trunk electronically from the inside. Comes complete with all the necessary hardware needed to install...

Product#: CB65103

1964-68 Mustang Coupe/Convertible; Solid Arm Billet Trunk Hinges; Steel Trunk; Black Anodized Finish

Designed for use as a direct replacement, these hood hinges require no alterations for vehicle installation. The gas-charged springs are specifically calibrated for steel hoods to provide a smooth and effortless action...

Product#: 43283B

1967-68 Mustang; OEM Style; Trunk Lock Stem Extension

Reproduction of the original 1967-68 Mustang trunk latch extension for use on all models. Designed to exact OE specifications to fit and work just like your your original. Manufactured in stamped steel. Fits and fuctions same...

Product#: CB65104

1964-68 Mustang Coupe/Convertible; Solid Arm Billet Trunk Hinges; Fiberglass Trunk; Black Finish

Designed for use as a direct replacement, these hood hinges require no alterations for vehicle installation. The gas-charged springs are specifically calibrated for steel hoods to provide a smooth and effortless action...

Product#: 43283C

1967-73 Mustang; Trunk Lock Stem Extension

Reproduction of the original 1967-73 Mustang trunk lock stem extension for use on all models. Designed to exact OE specifications to fit and work just like your original. Manufactured in stamped steel. Measures 4 1/2"

Product#: CTD

1964-68 Ford Mustang; Rear Seat and Trunk Divider Panel; Coupe

Reproduction of the original rear seat to trunk divider panel for use with 1964 1/2 -68 Ford Mustang Coupe models. There's a great chance that the fiberboard panel that fits behind the rear seat within the trunk needs to be...

Product#: 47076B

1967-70 Mustang; Spare Wheel Mounting Bracket; EDP Coated

Reproduction of the original spare wheel mounting bracket designed for use with 1967-70 Mustangs. Each bracket is manufactured in stamped steel replicating the original factory design. The spare tire mounting bracket spot...

Product#: 17032AR

1964-73 Ford/Mercury; 13/16" Wheel Lug Nut Wrench

Very nice reproduction of original lug nut wrench for various 1964-73 Ford and Mercury models. Wrench doubles as a jack handle and wheel cover removal tool. Ford Applications: 1964-73 Mustang Mercury Applications: 1967-73...

Product#: 45444HW

1964-73 Ford Mustang; Seat Trunk Divider Screw Install Kit; With Silicone

This installation kit is designed to assist with mounting a metal rear seat to trunk divider panel. The kit includes self tapping screws and silicone adhesive to help securely fasten the divider panel during installation....

Product#: A4060A01

1967-68 Mustang Coupe Loop Trunk Floor Carpet - Black

When it comes to quality, OER® is the most trusted name in the restoration parts industry. Each product is manufactured and designed to replicate the original OE product exactly and this all new reproduction trunk carpet...

Product#: 45117B

1967-68 Mustang Fastback; Lower Trunk Drip Rail Corner; RH Passenger Side

Reproduction of the original style lower trunk drip rail corner panel designed for use with 1967-68 Mustang Fastback models. Each drip rail corner is manufactured in stamped steel to original factory specifications featuring...

Product#: 45117A

1967-68 Mustang Fastback; Lower Trunk Drip Rail Corner; LH Driver Side

Reproduction of the original style lower trunk drip rail corner panel designed for use with 1967-68 Mustang Fastback models. Each drip rail corner is manufactured in stamped steel to original factory specifications featuring...

Product#: 45444B

1964-68 Ford Mustang; Metal Seat Trunk Divider; Convertible

Upgrade the rear interior structure of your classic with this heavy duty rear seat to trunk divider panel. Manufactured from durable 18 gauge steel, this panel provides a much stronger alternative to the original fiberboard...

Product#: 22023B

1967-73; Mustang and Cougar; Door Lock and Trunk Lock Retainer

Individually packaged. This is the retaining clip that holds the lock cylinder in place, inside each door. One required per door lock on 1967-68 Mustang and Cougar models. It is also used on the trunk lock on 1967-73 Mustang...

Product#: GN110676

1978-87 GM Late Design; 1967-73 Ford Mustang; Trunk Lock Shaft

Trunk lock cylinder shaft for various 1967-73 Ford and 1978-87 GM models. Shaft goes at the end of the trunk lock cylinder, opens trunk when key is turned. Service replacement for some models.

Product#: TE10

1968-70 Ford Falcon; Trunk Side Extender Filler Boards; Fiberboard; Pair

Reproduction of the original type trunk extender / filler boards for use with 1968-70 Ford Falcon models. These boards fit on either side of the trunk and fill the gap between the floor and the upper quarter panel. They are...

Product#: TB1

1964-73 Ford Mustang; Trunk Tote Bag; No Logo; Small; 17" X 8" X 8"; Ford Plaid Pattern

Beautifully designed, hand-crafted Ford plaid pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this small tote bag is constructed from the...

Product#: 45118A

1967-68 Mustang; Lower Trunk Drip Rail Corner; Coupe, Convertible; Passenger Side

Reproduction of the original style lower trunk drip rail corner panel designed for use with 1967-68 Mustang coupe and convertible models. Each drip rail corner is manufactured in stamped steel to original factory...

Product#: M109L

1965-70 Ford Mustang; Trunk Floor Drop Off; LH Driver Side

This repair panel for the trunk area overlaps the trunk floor by 1" and drops off the meet the bottom of the quarter panel. H 9-1/2" x L 20-1/4" Made in USA Installs on the Left Hand (Driver) Side.

Product#: CTD-A

1967-68 Ford Mustang; Rear Seat to Trunk Divider Panel; Convertible

Reproduction of the original rear seat to trunk divider board for use with 1967-68 Ford Mustang Convertible models. There's a great chance that the fiberboard panel that fits behind the rear seat within the trunk needs to be...

Product#: KF62

1967-93 Mustang; Trunk & Glove Box; Pony Key Blank; With Ford & Pony Logo

1967-93 Mustang trunk and glovebox key styled after the Pony keys used on early 1964-66 Mustangs.These keys are made to OE specifications providing a direct fit re-key for any 1967-93 Mustang with a stock ignition switch