Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal...
Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle pedal assembly, features a removable lower arm and is splined for versatile mounting to either the right or left...
Lokar Aluminum Throttle Pedal Assembly; Features 2" x 5" Pedal Pad; Black Anodized Finish with Rubber Inserts
Classic $231.99 ea
Barefoot Gas Pedal Pad; Chrome With Black Powder Coated Inlay
Stomp on it in true retro style with this groovy barefoot accelerator pedal cover. This far out pedal cover takes you back to the sixties every time you drive your classic. Chrome cover mounts over your existing accelerator...
Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts
The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...
Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts
Classic $175.99 ea
Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...
Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
Classic $224.99 ea
Street Demon; Throttle Solenoid Set
Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel Systems includes the solenoid, bracket, and mounting nut....
Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts
Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA
Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts
Classic $95.99 ea
Chrome Carburetor Return Spring Bracket; Universal
This chrome universal carb return bracket is designed to replace the original bracket for most carburetors. Adds a high performance touch to any carburetor.
Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts
Classic $231.99 ea
Lokar Stainless Steel Throttle Cable Springs
Stainless steel GM designed dual springs for use with Lokars SR4001 bracket (sold separately). Made in USA
Holley; Throttle Cable Bracket
This chrome throttle cable bracket can be used with all 4150 and 4160 model square bore Holley carburetors. It includes dual stainless steel return springs.
2 and 4 Bbl Holley Throttle Return Spring Set
Fits Holley 2300 and 2305 2 bbl. or Holley 4150 and 4160 4 bbl. carburetors mounted on any manifold.
Lokar Black Anodized Billet Aluminum 3/4" Throttle Assembly Spacer
Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA
Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts
The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...
Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts
Classic $244.99 ea
Lokar Billet Aluminum Throttle Pedal Assembly; features 1-1/2" x 4" Pedal Pad; Ball Milled Finish
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Pedal Assembly; features 1-1/2" x 4" Pedal Pad; Ball Milled Finish
Classic $224.99 ea
Lokar Chrome Steel 3/4" Throttle Assembly Spacer
Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA
Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish
Classic $231.99 ea
Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts
The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...
Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts
Classic $188.99 ea
Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
Classic $224.99 ea
Lokar Brushed Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer
Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA
2011-22 Ford Mustang; Holley Drive by Wire Accelerator Pedal
This Holley DBW accelerator pedal is a perfect compliment to any vehicle using Drive by Wire. Offers plug and play compatibility with Holley EFI and simply bolts in stock locations when used with Holley DBW Pedal Brackets....
Lokar Billet Aluminum 3/4" Throttle Assembly Spacer
Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA
1968L-70 Mustang; Accelerator Pedal Tension Spring & Screw Kit; Various Models
Reproduction accelerator shaft to pedal spring and screw kit that mounts to the accelerator pedal arm maintaning tension on the pedal. Manufactured from spring steel to ensure proper fit and function. Each kit includes the...
1968L-70 Mustang; Accelerator Pedal Tension Spring & Screw Kit; Various Models
Classic $9.99 kit
Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Ball Milled Finish
The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...
Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Ball Milled Finish
Classic $244.99 ea
1964-72 Ford, Mercury; Accelerator Pedal Tension Spring; Various Models
Reproduction accelerator shaft to pedal spring that mounts to the accelerator pedal arm maintaning tension on the pedal. Manufactured from spring steel to ensure proper fit and function. Ford Applications: 1964-1968 Ford...
1964-72 Ford, Mercury; Accelerator Pedal Tension Spring; Various Models
Classic $2.99 ea
1964-72 Ford/Mercury; Various Applications; Accelerator Pedal Pad; With Stainless Steel Trim
Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, grip, and polished stainless steel trim. For various 1964-72 models as listed. Replaces Ford part # C5ZZ-9735-D. Ford...
1964-72 Ford/Mercury; Various Applications; Accelerator Pedal Pad; With Stainless Steel Trim
Classic $12.99 ea
1965-68 Ford Mustang; Pedal Pad Set; With Manual Transmission and Disc Brakes
Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Our reproduction accelerator pedal pad is manufactured to exact factory specifications including correct ribbing grip and...
1965-68 Ford Mustang; Pedal Pad Set; With Manual Transmission and Disc Brakes
Classic $26.99 kit
1965-68 Mustang; Accelerator Rod; from Shaft to Bellcrank; 260, 289, 302
Reproduction of the original accelerator rod set designed for use with 1964-67 Mustang models. Each rod is manufactured to factory specifications for proper fitment and function. For use with 260, 289, 302 engines.
1965-68 Mustang; Accelerator Rod; from Shaft to Bellcrank; 260, 289, 302
Classic $4.99 ea
1968-79 Ford Car & Truck; Accelerator Pedal Pad; Various Models
Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, and grip pattern. For various 1968-71 Ford car models and 1973-79 Ford truck models as listed. Replaces Ford part #...
1965-68 Ford Mustang; Pedal Pad Set; With Manual Trans and Drum Brakes
Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Manufactured to exact factory specifications featuring correct ribs. Accelerator pad features polished trim piece. This set...
1965-68 Ford Mustang; Pedal Pad Set; With Manual Trans and Drum Brakes
Classic $20.99 kit
1968-79 Ford ; Accelerator Pedal Trim; Stainless Steel; Various Models
Reproduction accelerator pedal pad trim manufactured to exact factory specifications featuring configuration and bright polished stainless steel finish. For various 1968-71 Ford car models and 1973-79 Ford truck models as...
1968-79 Ford ; Accelerator Pedal Trim; Stainless Steel; Various Models
Classic $11.99 ea
1968 Ford Mustang; Pedal Pad Set; With Automatic Transmission and Disc Brakes
Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Accelerator pedal pad is manufactured to exact factory specifications featuring correct ribs and polished trim. Brake pedal...
1968 Ford Mustang; Pedal Pad Set; With Automatic Transmission and Disc Brakes
Classic $18.99 kit
1968 Ford Mustang; Pedal Pad Set; With Automatic Transmission and Drum Brakes
Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Accelerator pedal pad is manufactured to exact factory specifications featuring correct ribs and polished trim. This kit is...
1968 Ford Mustang; Pedal Pad Set; With Automatic Transmission and Drum Brakes
Classic $17.99 kit
1964-68 Mustang, Cougar; Accelerator Linkage; V8 with Automatic Transmission
Reproduction of the original accelerator linkage designed for use with 1966-68 V8 Mustangs or 1967-68 V8 Cougar equipped with automatic transmission. This linkage connects your accelerator pedal to the accelerator rod. Mounts...
1964-68 Mustang, Cougar; Accelerator Linkage; V8 with Automatic Transmission
Classic $64.99 ea
1964-68 Ford Mustang; V8; Manual Transmission; Accelerator Linkage
Reproduction accelerator linkage for 1964-68 V8 Mustangs or 1967-68 V8 Cougar equipped with manual transmission. This linkage connects your accelerator pedal to the accelerator rod. It mounts to your firewall and includes the...
1966-69 Ford, Mercury; Accelerator Linkage Rod; 6 Cylinder; 170, 200
Correct reproduction accelerator linkage rod for 1966-68 Fairlane, 1968-69 Falcon, 1967-68 Mustang, 1966-67 Ranchero, 1968-69 Torino, and 1966-68 Comet models equipped with 6 cylinder 170, 200 engines. The linkage rod is a...
1966-69 Ford, Mercury; Accelerator Linkage Rod; 6 Cylinder; 170, 200
Classic $23.99 ea
1964-72 Ford, Mercury; Accelerator Pedal Assembly; Billet Aluminum
Machined from solid 6061-T6 billet aluminum with a clear anodized finish, these pedal covers are a great addition to any vehicle. Includes stainless steel mounting hardware.
Brushed Billet Aluminum Pedal & Arm Assembly For Lokar Drive-By-Wire Throttle Control
Lokar drive-by-wire electronic throttle control pedal assemblies are designed to work with Lokar's drive-by-wire electronic throttle controls. The addition of one of these custom pedals completes the Lokar assembly of the...
Brushed Billet Aluminum Pedal & Arm Assembly For Lokar Drive-By-Wire Throttle Control
Classic $187.99 ea
Lokar Black Anodized Billet Aluminum Drive-By-Wire Electronic Throttle Control Assembly
This Lokar billet aluminum drive-by-wire electronic throttle control assembly is preprogrammed specifically for Ford Coyote 5.0L crate engines and will accept both factory and aftermarket wiring harnesses. Made in USA...
Lokar Black Anodized Billet Aluminum Drive-By-Wire Electronic Throttle Control Assembly
Classic $594.99 ea
Lokar Bright Anodized Billet Aluminum Drive-By-Wire Electronic Throttle Control Assembly
This Lokar billet aluminum drive-by-wire electronic throttle control assembly is preprogrammed specifically for Ford Coyote 5.0L crate engines and will accept both factory and aftermarket wiring harnesses. Made in USA...
Lokar Bright Anodized Billet Aluminum Drive-By-Wire Electronic Throttle Control Assembly
Classic $594.99 ea
Black Billet Aluminum Pedal & Arm Assembly For Lokar Drive-By-Wire Throttle Control
Lokar drive-by-wire electronic throttle control pedal assemblies are designed to work with Lokar's drive-by-wire electronic throttle controls. The addition of one of these custom pedals completes the Lokar assembly of the...
Black Billet Aluminum Pedal & Arm Assembly For Lokar Drive-By-Wire Throttle Control
Classic $187.99 ea
1964-68 Ford Mustang Lokar Black Billet Aluminum Throttle Pedal with Rubber Inserts
Replace your worn out Mustang hard throttle linkage with Lokar's Mustang Throttle Assembly. Designed as a direct replacement for the stock assembly when paired with Lokar or aftermarket throttle cable and brackets. Throw away...
1964-68 Ford Mustang Lokar Black Billet Aluminum Throttle Pedal with Rubber Inserts
Classic $267.99 ea
1966-70 Ford, Mercury: Accelerator Pedal Rod Seal; Various Models
Reproduction accelerator pedal to firewall seal. Replacing the old or weathered original will help ensure that the seal between the acccelerator pedal and the firewall is secure. Manufactured in OE style material for quality...
1964-68 Ford Mustang Lokar Brushed Billet Aluminum Throttle Pedal Assembly with Rubber Inserts
Replace your worn out Mustang hard throttle linkage with Lokar's Mustang Throttle Assembly. Designed as a direct replacement for the stock assembly when paired with Lokar or aftermarket throttle cable and brackets. Throw away...
1964-68 Ford Mustang Lokar Brushed Billet Aluminum Throttle Pedal Assembly with Rubber Inserts
Classic $267.99 ea
Reproduction accelerator shaft to pedal spring and screw kit that mounts to the accelerator pedal arm maintaning tension on the pedal. Manufactured from spring steel to ensure proper fit and function. Each kit includes the...
1964-68 Mustang; 1966-68 Falcon, Fairlane, Ranchero; Accelerator Pedal Tension Spring & Screw Kit; Various Models
Classic $6.99 kit
1966-70 Ford/Mercury; Accelerator Pedal Rod Firewall Grommet; Various Models
This reproduction accelerator pedal rod seal is an exact replica of the original grommet. Forms a seal around the accelerator rod where the accelerator rod enters the firewall from the passenger compartment. Grommet will seal...
1966-70 Ford/Mercury; Accelerator Pedal Rod Firewall Grommet; Various Models
Classic $1.99 ea
1966-77 Bronco; Accelerator Pedal Assembly; Billet Aluminum
Enhance your interior with this 1966-77 Bronco Accelerator Pedal Assembly. Featuring machined billet aluminum with a clear anodized finish over an aggressive tread pattern for a positive grip. Includes stainless steel...
1965-77 Ford; Various Models; Accelerator Pedal
Reproduction accelerator pedal for various Ford and Mercury models. Each pedal is designed to replicate the original in every detail. Replaces Ford part # C5AZ-9735-D. Ford Applications: 1965-66 F-Series 1965-66 F100, F250...
1964-68 Ford, Mercury; Accelerator Return Spring; 260, 289, 302, 390, 427, 428CJ; Various Models
Correct replacement for the original accelerator return spring on 1965-68 Mustangs. Closes carburetor throttle plate when accelerator pedal is released. Each spring duplicates the original design and tension ratio making the...
1964-68 Ford, Mercury; Accelerator Return Spring; 260, 289, 302, 390, 427, 428CJ; Various Models
Classic $2.99 ea
2011-22 Ford Mustang; Replacment Drive By Wire Accelerator Pedal Assembly For Coyote-Based Engines
This Ford throttle pedal assembly utilizes DBW (drive-by-wire) technology that eliminates the need to fabricate a throttle cable system, making the install a simple install. These assemblies are direct replacements for those...
1968-79 Mustang, Falcon, Cougar; Accelerator Pedal Spring; Various Models
Reproduction of the original accelerator shaft to pedal spring that mounts to the accelerator pedal arm maintaning tension on the pedal. Manufactured from spring steel to ensure proper fit and function. Designed for use on...
1968-79 Mustang, Falcon, Cougar; Accelerator Pedal Spring; Various Models
Classic $5.99 ea
1964-72 Ford/Mercury; Accelerator Pedal Mounting Screw; Various Applications
Reproduction accelerator pedal mounting screw or 1964-72 Ford & Mercury models. The screw is manufactured to original specifications to replace the original exactly. 1 required per vehicle. Ford Applications: 1964-68 Mustang...
1964-72 Ford/Mercury; Accelerator Pedal Mounting Screw; Various Applications
Classic $3.99 ea
1966- 1977 Ford Bronco; Drive By Wire Pedal Bracket Set (Pedal Assembly Sold Separately)
Product description: Designed to be a 100 % bolt on installation, This Bracket set adapts the popular Ford CR3Z-9F836-E & M-2301-BA pedal to your 1966-1977 Ford Bronco. Simply remove the factory throttle linkage and bolt in...
1966- 1977 Ford Bronco; Drive By Wire Pedal Bracket Set (Pedal Assembly Sold Separately)
Classic $165.99 kit
1967-72 Ford F-Series Truck/1969-72 E-Series Econoline; Accelerator Pedal Spring
Reproduction accelerator shaft to pedal spring for 1967-72 F-100, F-250, and F-350 pickup trucks. This spring mounts to the accelerator pedal arm maintaning tension on the pedal. Manufactured from spring steel to ensure...
1969-70 Ford; Accelerator Pedal Mounting Screw; Various Models
Reproduction of the special accelerator mounting screw pin is manufactured exactly like the original Ford screw. Using original blueprints from Ford, each screw pin is designed and manufactured to exact dimensions in quality...