Product#: 25042

Mallory; Distributor Points; Standard

Ignition points for all 23, 24, 25 26 and 27 series Mallory breaker point distributors.


Product#: 8140C

Accel; 1955-74; Chrome; 42,000 Volt; 1.4 Ohm Primary; Superstock Ignition Coil; Points

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability. Fits 1955-74 with breaker point ignition


Product#: 351694

1975-82 GM; Ignition Wire Grommet; 4 Hole; With Slits

Reproduction 4-hole igniton wire grommet for various 1975-82 Buick, Chevrolet, Pontiac, and Oldsmobile models. Features convenient slits so it can be installed on each plug wire without removing or replacing the wire end. Can...


Product#: 66120

Chrome Coil Cover

Dress your engine with this all chrome coil cover. Fits most early model coils. Includes cover and attaching bracket. For use with small block engines.

Chrome Coil Cover

MSRP $12.99 ea
Classic $10.99 ea

Product#: TT14250

4 Piece 6" x 1-1/2" Spark Plug Wire Heat Shield Set

This heat shield set offers spark plug wires and boots the ultimate protection from conductive and radiant heat. The dual purpose sleeving has an aluminized outer surface that reflects 90% of radiant heat, up to 2000° F,...


Product#: 209M

Mallory; Distributor Cap; For 23, 24, 25, 26, 27 And 37 Series Distributors

Replacement distributor cap for Mallory Unilite distributors. Fits 23, 24, 25, 26, 27 and 37 Series. Mallory Heavy-Duty cap is constructed of top quality material and designed to fit your application for long lasting...


Product#: TT14262

Black 4 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: T4973

Vacuum Advance Cover; Chrome Plated Steel

Chrome plated steel cover that slides over factory vacuum advance units. Attaches with double sided tape. Fits most classic vaccum advance distributors.


Product#: TT14261

Red 4 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: TT14200

2 Piece 6" x 1-1/2" Spark Plug Wire Heat Shield Set

This heat shield set offers spark plug wires and boots the ultimate protection from conductive and radiant heat. The dual purpose sleeving has an aluminized outer surface that reflects 90% of radiant heat, up to 2000° F,...


Product#: TT14260

Natural 4 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: TT14271

Red 6 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: TT14263

Blue 4 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: TT14270

Silver 6 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: TT14272

Black 6 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: TT14273

Blue 6 Piece Cool-It Plug Wire Sleeve Set

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. It's...


Product#: MN2417

Spark Plug Deluxe Wire Separator Set; Blue

This set of spark plug wire separators is made from high grade plastic which helps insulate the plug wires and reduce shorts and crosstalk. Includes two 4-wire separators, two 3-wire separators, and two 2-wire separators


Product#: T9097

Chrome 4 Hole 5-1/4" High Lift Wire Looms - Pair

Beautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation. Sold as a pair.


Product#: AE81214

Alter Ego 812 Series; Insulated Billet Aluminum Line Clamp; 4 Hole/Separator; 3/16" to 3/8"

Alter Ego 812 Series insulated billet aluminum line clamp/separator with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...


Product#: 7619-FBHK

Standard Ignition Spark Plug Wire Set; 6 Cylinder

Spark plug wires are a major component in the vehicles ignition system. Electrical failure can be greatly hastened by loose connections at the ignition coil(s), distributor or spark plugs causing telltale corrosion at...


Product#: 3932344

1955-07 GM V8 Distributor Gasket

Distributor gasket for various 1955-07 GM 8 cylinder models. Seals the distributor base to the engine block.


Product#: 1970344

1959-74 GM; Ignition Coil Bracket; OE Style; 25º angle; Zinc Plated

OER® reproduction of the original style steel coil bracket for use on various GM small block engines. Manufactured from precision stamped and formed steel as original, each bracket is produced to original specifications...


Product#: *R303

1957-74 Chevrolet V8 Distributor Tune Up Kit

Genuine ACDelco service replacement tune-up kit for GM breaker point ignition. Fits 1957-74 GM V8 distributors. Kit includes: Points Condensor Rotor


Product#: AK111A

1955-90 Chevrolet Big Block or Small Block; Distributor Hold Down Bolt; Polished Chrome

Distributor bolt for Chevy big block or small block engines. Each hex head cap screw bolt is made in the USA with steel, chrome plated, and polished to perfection.


Product#: G7240

1957-74 GM 8 Cylinder Distributor Cap

ACDelco distributor cap for 1957-74 8 cylinder models with Delco Remy breaker point ignition. This distributor cap is a Genuine Delco service replacement part which may differ cosmetically from the originally installed...


Product#: AK111B

1955-90 Chevrolet Big Block or Small Block; Distributor Hold Down Bolt; Polished Stainless

Distributor bolt for Chevy big block or small block engines. Each hex head cap screw bolt is made in the USA in stainless steel and polished to perfection.


Product#: G6010

1960-74 V8 GM Distributor Rotor; ACDelco

Genuine ACDelco distributor rotor used for 8 cylinder models with breaker point ignition. This rotor is a service replacement part which may differ cosmetically from the originally installed part.


Product#: DR2028G

1955-74 GM; V8; Premium Distributor Cap And Rotor Set

When you want ignition components that are one step above OE quality, go for the GOLD! Classic Industries® is proud to offer this PREMIUM line of ignition components. World-Class manufacturing technology, high performance...


Product#: *GQ1002

1957-74 8 Cylinder Premium Quality Tune Up Kit

When you want ignition components that are one step above OE quality, go for the GOLD! Classic Industries® is proud to offer this PREMIUM line of ignition components. World-Class manufacturing technology, high performance...


Product#: T4116

1963-91 Distributor Hold Down Clamp

Ideal to hold distributor in place for accurate timing. This extra bright chrome plated bracket replaces the original unit on various GM applications..


Product#: 226150

Chevrolet Distributor Housing Shims; Small Block, Big Block, and 90° V6 Chevy

When an engine block has been decked or heads have been resurfaced, shims are needed under the distributor to maintain correct clearance. If the distributor sits too low, it can cause damage to the oil pump or camshaft. These...


Product#: D1060

1957-74 V8 GM Distributor Contact Set

Genuine ACDelco contact set for 8 cylinder models with breaker point ignition.


Product#: G6043

1957-74 GM Distributor Condenser

Original GM distributor condenser used for 8 cylinder engines with breaker point ignition. This condenser is a genuine GM service replacement part which may differ cosmetically from the originally installed part.


Product#: DR1080

1957-74 8 Cylinder Point Set 1 Piece Uni-Set

Service replacement points for 8 cylinder models. The points sets feature a nickel plated copper strip for higher conductivity.


Product#: U1511

1957-73 Chevrolet, 67-74 Pontiac 8 Cylinder Condenser

Service replacement condensers for 8 cylinder models. The condensers are double plated with precision windings, brass terminals and insulated multi-strand copper wire for optimum energy.


1955-74 Chevrolet, Pontiac, AMC; V8; Distributor Cap
NEW

Product#: DR0429G

1955-74 Chevrolet, Pontiac, AMC; V8; Distributor Cap

Replace your worn-out or faulty component with this premium replacement from WVE. This product is designed and tested to ensure the ultimate in durability and functionality. Made to meet or exceed the OEM standards, it will...


Product#: DR2028

1955-74 GM; V8; Standard Distributor Cap And Rotor Set

Service replacement cap for 8 cylinder models. The cap features solid brass or copper inserts for longer life and maximum resistance to corrosion and electrical pitting. Their high mineral content and glass reinforced molding...


Product#: 12338662

Distributor Lead 8 Cylinder

This is replacement distributor lead for a wide variety of classic American car and truck models. High copper wire stranding count ensures maximum flexibility and resistance to breakage. AMC Applications 1968-70 AMX 1963-74...


Product#: DR0429

1955-74 Chevrolet, Pontiac, AMC; V8; Distributor Cap

Replace your worn-out or faulty component with this quality replacement distributor cap. This product is designed and tested to ensure the ultimate in durability and functionality. Made to meet or exceed the OEM standards, it...


Product#: 110128

Accel; 1957-74 V8; High Performance Contact Points Assembly; For Factory GM Distributor

If your vehicle is equipped with a V8 engine with a GM factory distributor, upgrade to Accel components during your next tune-up. You'll enjoy increased performance, longer life and maximum dependability. Fits 1957-74 V8


Product#: D1835

1955-74 Chevrolet 8 Cylinder Except 348/409; Distributor; Remanufactured

If your classic is having problems starting, has a rough idle or the performance is not what it use to be, it could be time to change your distributor. Each distributor is remanufactured and tested to guarantee you get the...


Product#: DR1077

1963-74 6 Cylinder Point Set

Service replacement points for 6 cylinder models. The points sets feature a nickel plated copper strip for higher conductivity.

1963-74 6 Cylinder Point Set

MSRP $12.99 set
Classic $10.99 set

Product#: 7619

1957-1976 Spark Plug Wire Set; 6 Cylinder

Spark plug wires are a major component in the vehicles ignition system. Electrical failure can be greatly hastened by loose connections at the ignition coil(s), distributor or spark plugs causing telltale corrosion at...


Product#: K1665

1964-75 Chevrolet, GMC Car and Truck; Distributor Hold Down Clamp; Various Models

Reproduction distributor hold down clamp for 1964-75 Chevrolet and GMC models with small block and big block engines. Each clamp is manufactured to specific GM specifications replicating the original in design, appearance,...


Product#: 1352999

1965-74 Chevelle, Impala; Camaro, GM Truck; Big Block; Non-Dated Spark Plug Wire Set; Features Packard TV R Logos and 135 degree Gray Boots

Replacement original style spark plug wire set, features correct Pacard TV R Suppression logo black wire, without a date code. Fits 1965-74 Chevrolet V8 big block applications without H.E.I. Can be used on most big block...


Product#: K0071

1967-72 Chevrolet; Spark Plug Wire Retainer Set; Small Block

Reproduction of the original spark plug wire retainers designed for use with various 1967-72 Chevrolet models with small block engines as listed. Replace your original missing or broken spark plug wire retainers with this OE...


Product#: K0140

1965-78 Chevrolet: Spark Plug Wire Heat Shields; Small Block; 2 Piece Design; 4 Piece Set

Reproduction of the original style spark plug wire heat shields designed for use with various 1965-78 Chevrolet car and truck models as listed. This 4-piece shield set includes: 4 shields with with bolt-on attachment...