Product#: CX1846

1958-72 Chevrolet; Spark Plug Wire Retainer; Side Mount; Small Block; 2 Wire; Each

Reproduction side spark plug wire retainer used on 1958-72 small block engines with ram horn style exhaust. This 2-wire retainer mounts on the side of the block using the heat shield bolt and keeps the spark plug wires...

Product#: CX1847

1958-72 Chevy, GMC; Lower Spark Plug Wire to Oil Pan Retainer Clip; Small Block; Each

Reproduction lower spark plug wire to oil pan retainer clip for various Chevrolet and GMC small block engines with ram horn style exhaust. This 2-wire retainer mounts on the lower side of the block using an oil pan bolt and...

Product#: CX1845

1955-72 Chevrolet; Rear Spark Plug Wire Retainer; Small Block; 4 Wire; 283, 327; Each; Various Models

Reproduction rear spark plug wire retainer for various 1955-74 Chevrolet models with small block engines. This 4-wire retainer mounts on the upper rear edge of the block below the heads to keep the spark plug wires separated....

Product#: B69602

Billet Specialties Polished Billet Aluminum 2-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: K0087

1965-76 Chevrolet; Big Block; Spark Plug Wire Retainers; Set of 4

Reproduction spark plug wire retainers for various Big Block Chevrolet applications. Replace missing or broken originals with these OE style retainers, reproduced to match the factory design and quality. This set of four...

Product#: AB60713

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Polished Finish

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: AB60712

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Machined Finish

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: AB60714

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Silverline Series

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: D141636

Chevrolet Small Block / Big Block Bow Tie Plug Wire Retainer Set

These unique factory wire retainers include the red Bow Tie emblem along with the word Chevrolet molded onto the black nylon head of each wire loom. The head is mounted on a high polished chrome stem. Get a custom look with...

Product#: B69601

Billet Specialties Polished Billet Aluminum 4-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: AB60711

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Black Anodized Finish

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: T4009

Chrome 4 Hole 3-3/4" Standard Lift Wire Looms

Beautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation. Sold as a pair.

Product#: K0071

1967-72 Chevrolet; Spark Plug Wire Retainer Set; Small Block

Reproduction of the original spark plug wire retainers designed for use with various 1967-72 Chevrolet models with small block engines as listed. Replace your original missing or broken spark plug wire retainers with this OE...

Product#: B69784

Billet Specialties Black Anodized Billet Aluminum 4-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69704

Billet Specialties Polished Billet Aluminum 4-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69782

Billet Specialties Black Anodized Billet Aluminum 2-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69604

Billet Specialties Polished Billet Aluminum 4-Wire Head Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69682

Billet Specialties Black Anodized Billet Aluminum 2-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69781

Billet Specialties Black Anodized Billet Aluminum 1-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69681

Billet Specialties Black Anodized Billet Aluminum 4-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69684

Billet Specialties Black Anodized Billet Aluminum 4-Wire Head Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69783

Billet Specialties Black Anodized Billet Aluminum 3-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B68703

Billet Specialties Polished Billet Aluminum 3-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B68702

Billet Specialties Polished Billet Aluminum 2-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B68701

Billet Specialties Polished Billet Aluminum 1-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: T9097

Chrome 4 Hole 5-1/4" High Lift Wire Looms - Pair

Beautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation. Sold as a pair.

Product#: 141709-BCHW

Chevy Bowtie Wirelooms, Black Crinkle

Chevrolet Performance Black Crinkle Wire Looms are positioned along the valve cover to hold the wires (up to 8mm) in a neat parallel arrangement, using the existing valve cover mounting bolts, the epoxy-coated Black Bowtie...

Product#: 141714-BCHW

"Chevrolet & Bowtie Emblem" Linear Wire Looms, Chevy S/B V8 1959-86, 2 Per Package, Black Crinkle.

This spark plug wire loom set is a linear style made for 7mm-8mm wires. They mount to the engine valve covers and are designed to fit 1959 to 1986 Small Block Chevy engines. Features a great looking, durable black crinkle...

Product#: D141638

1955-86 Chevrolet Small Block Linear Wire Loom with Bow Tie

Using the valve cover mounting bolts, these handsome chrome plated looms are positioned along the valve cover to hold the wires in a neat parallel arrangement. The epoxy coated BowTie emblem is centrally located for maximum...

Product#: D141639

1965-91 Chevrolet Big Block Linear Wire Loom with Bow Tie

Using the valve cover mounting bolts, these handsome chrome plated looms are positioned along the valve cover to hold the wires in a neat parallel arrangement. The epoxy coated BowTie emblem is centrally located for maximum...

Product#: K0118

1969-71 Chevrolet; Spark Plug Wire Retainer; Small Block; Front; LH Drivers Side

Reproduction of the original spark plug wire retainer designed for use with various 1969-71 Chevrolet models with small block engines. Each retainer is manufactured to correct factory dimensions replicating the original...