Retro Sound 4" X 10" Stereo Dash Speaker; Dual Voice Coil; 25 watts RMS/50 watts MAX power
RetroSound® Stereo Dash Speakers produce a stereo mix from a single speaker location. These dual voice coil speakers are designed to perform well in an open-air environment to provide the best possible audio quality in...
Retro Sound 4" X 10" Stereo Dash Speaker; Dual Voice Coil; 25 watts RMS/50 watts MAX power
Classic $53.99 ea
200 Watt Undercover II Stealth Speakers with 8" Woofer
Want a little more out of your hidden speaker system? This is the way to get it. These Undercover II speakers feature an 8" woofer and 2 piezo tweeters in each box. Ths system can be mounted in many of the same locations as...
Retro Sound 160 Watt Ultra Thin 4" x 10" Universal Dual Voice Coil Replacement Speaker
RetroSound® Ultra Thin Dual Voice Coil replacement speakers are just what you are looking for to finish your sound system. This premium speaker has an acoustically transparent cone to protect the drivers and cones from...
Retro Sound 160 Watt Ultra Thin 4" x 10" Universal Dual Voice Coil Replacement Speaker
Classic $81.99 ea
1958-83 GM; Front In Dash / Rear Seat Shelf Speaker; 6" x 9"; 8-10 Ohms; Each
Reproduction 6" x 9" factory style 8-10 Ohm speaker for various 1958-83 GM models. This is an exact replica of the speaker installed by the GM factory in the dash and/or beneath the rear seat shelf, manufactured to original...
1958-83 GM; Front In Dash / Rear Seat Shelf Speaker; 6" x 9"; 8-10 Ohms; Each
Classic $59.99 ea
Reproduction of the original 4" x 6" front kick panel speaker and in-dash speaker for various 1965-93 GM models with a factory 4-speaker stereo system that requires a 8-10 OHM speaker. Each speaker is manufactured to the...
Our Premium 5-1/2" round coaxial stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 100 watts peak power capacity and a frequency response of 90-13KHZ. Ultra thin design makes this...
Kick Panel Speakers; with Grills; 5-1/2" Coaxial Premium; 100 Watts; 90-13KHZ Frequency Response; Pair
Classic $89.99 pr
Reproduction rear speaker grille for various GM, Ford, and Chrysler models including 1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth. Fits Chevelle, Malibu, Impala, Caprice and Nova among other models....
Kenwood 3-Way 6" X 9" Speakers - 400W Peak / 45W RMS
This set of Kenwood triaxial 6" x 9" speakers perfect for any muscle car or truck owner looking to improve their audio experience. Each set includes two 6" x 9" speakers and grilles. Specifications: Woofer: 6" x 9" Cone...
Universal Spacer; Kick Panel; 6-6.5 Speakers
Universal 1 inch thick spacer for vehicles that need more depth to mount speaker in door or kick panel or anywhere extra depth is needed. These spacers are for 6-6.5 inch speakers. Will also work with most 5-1/4 speakers....
Premium Kick Panel Speakers; 4"; 70 Watts Peak Power; Pair
Our Premium 4" round stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 70 watts peak power capacity and a frequency response of 100-13 KHZ. 2" deep design makes this speaker...
RetroSound 6x9" 3-Way Premium Ultra-thin Replacement Speakers
These RetroSound® 6x9-inch stereo speakers are a great way to upgrade the sound in your classic. They use a Neodymium magnet structure for high power handling in a slim-mount design -- mounting depth is just 2.2-inches...
1964-81 Buick, Chevy, Olds, Pontiac; Rear Seat Shelf Speaker Mounting Studs; 4 Piece Set
Reproduction of the original style rear seat shelf speaker mounting studs for use with various 1964-81 GM coupe and hardtop models. These studs have the correct spring clips used to keep tension on the stud when attached to...
1964-81 Buick, Chevy, Olds, Pontiac; Rear Seat Shelf Speaker Mounting Studs; 4 Piece Set
Classic $17.99 set
1970 Chevrolet; Rear Speaker Grille; with 4 Mounting Studs; Various Models
Reproduction rear speaker grille for various GMmodels. Correct for 1970 Chevelle, Nova, Impala, Caprice and Monte Carlo. This speaker grill features straight sides and four built-in studs like the original. This is a...
1970 Chevrolet; Rear Speaker Grille; with 4 Mounting Studs; Various Models
Classic $89.99 ea
40W Kenwood; Center Dash Dual Speaker; For Vehicles Originally Equipped With Mono radio
Kenwood dual dash speakers provide great stereo sound from your classic car's factory mono speaker location. Our S5005 replaces OEM speakers from the original Mono location. All of our dual dash speakers are pre-wired and...
40W Kenwood; Center Dash Dual Speaker; For Vehicles Originally Equipped With Mono radio
Classic $86.99 ea
DEI Boom Mat 4" Round Speaker Baffles - Standard Depth
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
RetroSound R-452N 4" Premium Ultra-thin Replacement Speakers
These RetroSound® 4-inch stereo speakers are a great way to upgrade the sound in your classic. They use a Neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches...
RetroSound Stereo Speakers are designed for maximum performance in your classic car or truck. Our Stereo Speakers use a ceramic magnet structure for high power handling, with a dip-cut design to prevent distortion. The Mylar...
140W Dual Voice Coil Dash Speaker
Get the best quality sound possible from your stereo with these 140 watt dual voice coil speakers. These speakers have up to 70% more cone area than original, giving you improved bass response and power. Both stereo channels...
120 Watt Undercover Stealth Speakers with 5-1/2" Woofers
These speakers were designed and manufactured specifically for "under seat" on most pre '78 cars and trucks or horizontal "wall" installations. If you've got the space we have the solution! The 120 watt capacity compact units...
ABS Textured Plastic Sheet 1/8" Thick x 12" x 24"; For Custom Dash Plates
Textured ABS plastic sheet is ideal for making custom trim plates for radios, EQs, crossovers, front panels, and more. Textured front, smooth back. Easy to trace on. Tough and impact-resistant, this material works well for...
ABS Textured Plastic Sheet 1/8" Thick x 12" x 24"; For Custom Dash Plates
Classic $12.99 ea
RetroSound S-42 4" Round Standard Series Stereo Speakers
These RetroSound® 4-inch stereo speakers offer high quality sound at an exceptional value. Mylar tweeters produce crisp, clear highs. Treated foam surrounds offer smooth sound and remarkable durability. Speaker grills not...
RetroSound SUB8100 Powered 8" Subwoofer
The RetroSound® SUB8100 is a powerful 8-inch amplified subwoofer system designed to fill in the low frequencies usually missing from classic car and truck sound systems. This compact subwoofer measures just 2 3/4 inches...
Custom Autosound 3-Way 6" X 9" Speakers - 200W Peak
Enhance sound quality by replacing OEM speakers with Custom Autosound triaxial stereo speakers. Each set comes complete with two 6" x 9" speakers, wire hardware and paintable, flat black speaker grills. Perfect for your rear...
4" x 10" Speaker Grill; With Mounting Ring
These 4x10-inch speaker grills are a great way to protect your speaker from damage. They can also be used to replace a worn or broken grill. The low-key black mesh grill is an attractive addition to your classic ride. A...
1955-57 Chevy Bel Air, 150, 210; Pipe Organ Universal Speaker Covers; 5" x 7" or 6" x 9"; ABS Chrome
These universal retro chrome pipe organ speaker covers are the perfect custom accessory for any 1955-57 Chevy Bel Air, 510, or 210 models. Whether you have a stock or custom interior, these pipe organ-style covers are a great...
1955-57 Chevy Bel Air, 150, 210; Pipe Organ Universal Speaker Covers; 5" x 7" or 6" x 9"; ABS Chrome
Classic $44.99 ea
Universal Fit 80 Watt Dual Speaker
Upgrade your original single dash speaker to a dual speaker system. Features two 4" speakers. Measurements: 11-1/2" center to center on the holes 4-1/2" width 12-1/2" overall length
Retro Sound 30 Watt Standard 3-1/2" Round Single Voice Coil Replacement Dash Speakers
Retro Sound stock replacement speakers are just what you are looking for to finish your sound system. These speakers have an acoustically transparent cone to protect the drivers and cone from elements. They have a 3-way...
Retro Sound 30 Watt Standard 3-1/2" Round Single Voice Coil Replacement Dash Speakers
Classic $64.99 pr
1955-81 Universal Speaker Covers; Musical Note" Design; Chrome; 6" x 9"; with 4 Screws; Each
These universal retro chrome "Musical Note" speaker covers are the perfect custom accessory for any GM, Chrysler, or Ford vehicles with a rear seat shelf. Whether you have a stock or custom interior, these "Musical Note"...
1955-81 Universal Speaker Covers; Musical Note" Design; Chrome; 6" x 9"; with 4 Screws; Each
Classic $24.99 ea
Front Door, Rear Pillar; Replacement Speaker; 4" Drop-in; Various Models
GRS AS-series car replacement speakers are economical drop-in replacements for blown, damaged, or dry-rotted speakers used in many vehicle models. The moisture resistant polypropylene cone reduces the chance of fading and...
Front Door, Rear Pillar; Replacement Speaker; 4" Drop-in; Various Models
Classic $16.99 ea
ABS Textured Plastic Sheet; 3/32" Thick x 12" x 24"; For Custom Dash Plates
Textured ABS plastic sheet is ideal for making custom trim plates for radios, EQs, crossovers, front panels, and more. Textured front, smooth back. Easy to trace on. Tough and impact-resistant, this material works well for...
ABS Textured Plastic Sheet; 3/32" Thick x 12" x 24"; For Custom Dash Plates
Classic $9.99 ea
DEI Boom Mat 6 1/2" Round Speaker Baffles - Slim
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
RetroPod 4x6-inch Surface Mount Speaker Modules; w/ Premium Speakers
RetroPods are the perfect solution for adding speakers to a classic car or truck without cutting or modifying the original interior. They mount on any flat surface and can be painted or wrapped to match the vehicle's interior...
RetroPod 4x6-inch Surface Mount Speaker Modules; w/ Premium Speakers
Classic $120.99 pr
1955-81 Universal Speaker Covers; Musical Note" Design; Black; 6" x 9"; with 4 Screws; Each
These universal retro chrome "Musical Note" speaker covers are the perfect custom accessory for any GM, Chrysler, or Ford vehicles with a rear seat shelf. Whether you have a stock or custom interior, these "Musical Note"...
1955-81 Universal Speaker Covers; Musical Note" Design; Black; 6" x 9"; with 4 Screws; Each
Classic $22.99 ea
RetroPod 4x6-inch Surface Mount Speaker Modules
RetroPods are the perfect solution for adding speakers to a classic car or truck without cutting or modifying the original interior. They mount on any flat surface and can be painted or wrapped to match the vehicle's interior...
DEI Boom Mat 6 1/2" Round Speaker Baffles - Standard Depth
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
ABS Textured Plastic Sheet 1/16" Thick x 12" x 24"; for Custom Dash Plates
Textured ABS plastic sheet is ideal for making custom trim plates for radios, EQs, crossovers, front panels, and more. Textured front, smooth back. Easy to trace on. Tough and impact-resistant, this material works well for...
ABS Textured Plastic Sheet 1/16" Thick x 12" x 24"; for Custom Dash Plates
Classic $5.99 ea
Universal Spacer; Kick Panel; 6-6.5 Speakers
Universal 1/2 inch thick spacer for vehicles that need more depth to mount speaker in door or kick panel or anywhere extra depth is needed. These spacers are for 6-6.5 inch speakers. Will also work with most 5-1/4 speakers....
DEI Boom Mat 5 1/4" Round Speaker Baffles - Slim
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 6 3/4" Round Speaker Baffles - Standard Depth
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 6" x 8" Oval Speaker Baffles - Standard Depth
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 4" Round Speaker Baffles - Slim
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 5 1/4" Round Speaker Baffles - Standard Depth
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 4" x 6" Oval Speaker Baffles - Standard Depth
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 4" x 6" Oval Speaker Baffles - Slim
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 6 3/4" Round Speaker Baffles - Slim
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
DEI Boom Mat 5" x 7" Oval Speaker Baffles - Standard Depth
Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...
210 Watt 4" x 10" Dual Center Dash Mount Speaker; Kenwood
Upgrade your sound with this Kenwood quality replacement in-dash speaker for your classic vehicle! Includes two 105 Watt RMS and 210 Peak watt in dash speakers, designed to fit directly into the dash as original. Each in dash...
Retro Sound 100 Watt Ultra Thin 5" X 7" Universal Dual Voice Coil Replacement Speaker
Retro Sound Ultra Thin Dual Voice Coil replacement speakers are just what you are looking for to finish your sound system. This speaker has an acoustically transparent cone to protect the drivers and cones from the elements....
Retro Sound 100 Watt Ultra Thin 5" X 7" Universal Dual Voice Coil Replacement Speaker
Classic $82.99 ea
1965-72 GM; Kick Panel Speaker Grills; 4" x 6"; Pair
Speaker grills are for use with 1965-72 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. Exact duplicate of the original factory installed 4" x 6" speaker grill. Manufactured in natural steel. Sold in...
Front Dual Voice Coil Speaker 140 Watts @ 4 Ohms
Our new dual voice coil (DVC) speakers will give you the best quality sound possible from your original mono speaker location. These speakers have up to 70% more cone area than the conventional dual speaker setup giving you...
1970-81 Buick, Chevrolet, Pontiac, Oldsmobile; Rear Speaker Grille; With 4 Mounting Studs
Reproduction rear speaker grille for various 1970-81 Buick, Chevrolet, Pontiac, and Oldsmobile models including Camaro, Firebird, Impala, and Regal. Each grill is manufactured in stamped steel to correct factory...
1970-81 Buick, Chevrolet, Pontiac, Oldsmobile; Rear Speaker Grille; With 4 Mounting Studs
Classic $37.99 ea
Replacement Speaker; 3.5" Drop-in
GRS AS-series car replacement speakers are economical drop-in replacements for blown, damaged, or dry-rotted speakers used in many vehicle models. The moisture resistant polypropylene cone reduces the chance of fading and...
Retro Sound 50 Watt Ultra Thin 4" x 6" Universal Single Voice Coil Replacement Speaker
Retro Sound Ultra Thin speaker is just what you are looking for to finish your sound system. This speaker has an acoustically transparent cone to protect the drivers and cone from the elements. It has a 3-way midrange tweeter...
Retro Sound 50 Watt Ultra Thin 4" x 6" Universal Single Voice Coil Replacement Speaker
Classic $84.99 pr
1967-72 Chevrolet C10; 1967-72 GMC C15; Truck; Custom Speaker Bracket; 6x9" Speaker
Our Speaker Brackets for 1967-1972 GM Truck are custom, pre bent blank brackets for your classic truck. They are formed to fit the back of a 1967-1972 Chevrolet C10 and GMC C15 pickup truck perfectly. For use with 6" x 9"...
1967-72 Chevrolet C10; 1967-72 GMC C15; Truck; Custom Speaker Bracket; 6x9" Speaker
Classic $99.99 pr
1967-81 Camaro, Firebird; Replacement Dash Speaker; Dual Cone; 6" x 9" Drop-in
GRS AS-series car replacement speakers are economical drop-in replacements for blown, damaged, or dry-rotted speakers used in many vehicle models. The moisture resistant polypropylene cone reduces the chance of fading and...
1967-81 Camaro, Firebird; Replacement Dash Speaker; Dual Cone; 6" x 9" Drop-in
Classic $13.99 ea
1963-72 Kenwood 4" X 6" 60 Watt Kick Panel Speakers
These Kenwood 4" x 6" dual mid-range two-way tweeter speaker assemblies are great for kick panel speaker replacement. Note: If your Camaro was originally equipped with the optional kick panel speakers, you can in stall them...
1967-72 GM Truck Models RetroSound Kick Panels With Speaker Cut-Outs - Pair
RetroSound kick panels mount easily in your classic 1967-72 GM Truck models, and will fit most 6.5" speakers. Features textured finish and can be painted to match your interior. The speaker mount is angled to direct sound...
1967-72 GM Truck Models RetroSound Kick Panels With Speaker Cut-Outs - Pair
Classic $104.99 pr
1967-72 GM Truck RetroSound Kick Panels With Premium 100 Watt Speakers - Pair
RetroSound kick panels mount easily in your 1967-72 GM truck models. Features textured finish and can be painted to match your interior. The speaker mount is angled to direct sound upwards towards the listener, and not at...
1967-72 GM Truck RetroSound Kick Panels With Premium 100 Watt Speakers - Pair
Classic $190.99 pr
1962-77 GM Car, Truck; Front Dash Speaker; 4" x 10"; 8 -10 Ohms; Authentic Reproduction
Reproduction 4" x 10" rectangular factory style front dash speaker for various 1962-77 GM models. The GM factory began using this style of speaker in 1962. By 1968 this speaker design was commonly found in almost all GM...
1962-77 GM Car, Truck; Front Dash Speaker; 4" x 10"; 8 -10 Ohms; Authentic Reproduction
Classic $69.99 ea
1970-81 Camaro; Kick Panels; with 30 Watt 4x6 Speakers; with Air Conditioning
RetroSound kick panels mount easily in your 1970-81 Camaro model with air conditioning, and will fit most 4"x6" speakers. Manufactured from injection molded for a factory fit. Features textured finish and can be painted to...