12 Piece 9" Stainless Steel Snap Strap Set
Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA
Pypes Stainless Steel Exhaust Band Clamp Butt Connector; 2.5" Diameter X 3" Wide
Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...
Pypes Stainless Steel Exhaust Band Clamp Butt Connector; 2.5" Diameter X 3" Wide
Classic $35.99 ea
12 Piece Stainless Steel Snap Strap Set
Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9" straps Four...
1967-69 Camaro, 1968 Nova, 1974-75 Impala; Exhaust Clamp; 2 1/4"; Saddle Style; OE Material
Correct reproduction of the original "saddle-style" 2 1/4" muffler clamp for use with various 1967-68 Camaro, 1969 Camaro (with dual exhaust, chambered exhaust), 1968 Nova (with dual exhaust), and 1974-75 Impala, Bel Air,...
1967-69 Camaro, 1968 Nova, 1974-75 Impala; Exhaust Clamp; 2 1/4"; Saddle Style; OE Material
Classic $7.99 ea
10 Piece Stainless Steel Snap Strap Set
Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Six 9" straps Four...
Why bolt up your new side pipe exhaust system with those rusty old clamps you've got laying around. Finish off your exhaust system with these stylish chrome clamps. Sold individually.
Exhaust Clamp; 2-1/2" ; with Chambered or Aluminized Exhaust; Stainless Steel
Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.
Exhaust Clamp; 2-1/2" ; with Chambered or Aluminized Exhaust; Stainless Steel
Classic $24.99 ea
1964-81 Camaro, Firebird, Chevelle, Nova, Impala; Exhaust Clamp; 2"; Saddle Style; OE Material
Correct reproduction of the original "saddle-style" 2" muffler clamp for use with various 1964-81 Camaro, Firebird, Nova, Chevelle, Impala, Bel Air, and Caprice models as listed. Each clamp is manufactured with quality OE...
1964-81 Camaro, Firebird, Chevelle, Nova, Impala; Exhaust Clamp; 2"; Saddle Style; OE Material
Classic $6.99 ea
1967-92 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Stainless Steel; Each
Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each clamp is manufactured in quality stainless steel replicating the original design for an authentic appearance. Great...
1967-92 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Stainless Steel; Each
Classic $14.99 ea
Standard Duty Exhaust Clamp; 2"; 5/16" Thread U-Bolt
Replacement style clamps for use with most applications requiring a 2" exhaust clamp.
Pypes Stainless Steel Exhaust Band Clamp; 2.5" Diameter X 1" Wide
Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...
Exhaust Clamp; Cadmium Plated; 2-1/2"; 3/8" Thread U-Bolt
Plated exhaust clamps now available for chambered or aluminized exhaust systems that offer long-lasting effectiveness over the original style non-coated clamps.
1967-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2"; "Guillitone" Style; OE Material
Correct reproduction of the original "Guillitone-style", 2" muffler clamp for use with 1967-74 Camaro, Chevelle, and Nova models as listed. Each clamp is manufactured with quality OE cold-rolled steel material, offering the...
1967-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2"; "Guillitone" Style; OE Material
Classic $8.99 ea
Exhaust Clamp; Stainless Steel; 2-1/4"; 3/8" Thread U-Bolt
Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Cadmium Plated; Each
Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each clamp is manufactured in quality stamped steel and cadmium plated replicating the original design for an authentic...
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Cadmium Plated; Each
Classic $5.99 ea
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2 1/4"; Cadmium Plated; Each
Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each 2 1/4" clamp is manufactured in quality stamped steel and cadmium plated replicating the original design for an...
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2 1/4"; Cadmium Plated; Each
Classic $5.99 ea
1964-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2 1/4"; "Guillitone" Style; OE Material
Correct reproduction of the original "Guillotine-style" - 2 1/4" muffler clamp for use with 1964-66 Chevy / GMC pickup trucks, 1967-74 Camaro, Chevelle, and Nova dual exhaust models. Each clamp is manufactured with quality OE...
1964-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2 1/4"; "Guillitone" Style; OE Material
Classic $8.99 ea
Correct replacement style Walker exhaust clamp for use with most applications requiring 2-1/8" clamp. Please check your applications carefully before ordering.
Pypes Stainless Steel Exhaust Band Clamp; Butt Connector; 3" Diameter X 3" Wide
Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...
Pypes Stainless Steel Exhaust Band Clamp; Butt Connector; 3" Diameter X 3" Wide
Classic $45.99 ea
Hooker; Collector Ring Kit for 3-1/2" Collectors
Hooker collector rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.
14-1/2" High Temperature Stainless Steel Cable Tie
High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.
10 Piece 7-1/2" High Temperature Stainless Steel Cable Tie Kit
High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.
7-1/2" High Temperature Stainless Steel Cable Tie
High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.
5 Piece 7-1/2" High Temperature Stainless Steel Cable Tie Kit
High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.
5 Piece 14-1/2" High Temperature Stainless Steel Cable Tie Kit
High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.
10 Piece 14-1/2" High Temperature Stainless Steel Cable Tie Kit
High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.
Heavy Duty Exhaust Clamp; 2-1/4"; 3/8" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.
Heavy Duty Exhaust Clamp; 3"; 3/8" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.
Heavy Duty Exhaust Clamp; 2-1/2"; 3/8" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.
Proform 3" Soft Conforming Aluminum Collector Gasket Set
Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.
Proform 2-1/2" Soft Conforming Aluminum Collector Gasket Set
Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.
Proform 3-1/2" Soft Conforming Aluminum Collector Gasket Set
Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.
68-74 Mopar 383/440 HP Exhaust Manifold Fastener Set OE Style
If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds. Applications: 1968-74 Coronet 1968-74 Super Bee 1968-74...
Mopar Exhaust Manifold to Headpipe Gasket - 2-1/2" i.d. With 4" Center to Center of Bolt Holes
This gasket connects the exhaust manifold to the head pipe. The composite metal design is excellent for all applications and can be removed and reused unlike other gasket materials. Note: 2-1/2" i.d. with 4" cente r to center...
Mopar Exhaust Manifold to Headpipe Gasket - 2-1/2" i.d. With 4" Center to Center of Bolt Holes
Classic $14.99 ea
1970-74 Challenger, Barracuda, Cuda; Muffler Hangers; Pair
Reproduction of the original style muffler hangers designed for use with 1970-74 Plymouth Barracuda, Cuda, and Dodge Challenger models. These hangers secure the rear side of the muffler to the trunk floor. Will fit models...
Heavy Duty Exhaust Clamp; 1-3/4"/45MM; 3/8" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.
1970-73 Barracuda/Challenger; Exhaust Floor Pan Bracket Kit; LH Driver Side
1970-73 Mopar E-Body exhaust floor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left (driver side) floor pan. The muffler hanger bolts to this bracket kit...
1970-73 Barracuda/Challenger; Exhaust Floor Pan Bracket Kit; LH Driver Side
Classic $68.99 ea
Replacement Q-clamps for various Mopar vehicles. Q-clamps were installed at the rear of the vehicle to secure the exhaust tips to the tailpipes.
Mopar Small Block LA Leakbuster Header Flange Gaskets
Replacement header flange gaskets for models equipped with a small block LA engine. Eliminate that annoying ticking sound from your header flange! This header flange gasket is made out of graphite foil with a stainless metal...
This clamp secures the heat tubes to the intake manifold. Made from steel like original.
1970-74 Challenger, Barracuda, Cuda; Resonator to Floor Pan Mounting Bracket
Reproduction of the original resonator floor pan mounting bracket for use with 1970-74 Challenger, Barracuda, and Cuda model. This resonator floor pan support bracket is manufactured from stamped steel and mounts to the floor...
1970-74 Challenger, Barracuda, Cuda; Resonator to Floor Pan Mounting Bracket
Classic $41.99 ea
Mopar Exhaust Manifold to Headpipe Flange - 2-1/2" i.d. with 4" Center to Center on Bolt Holes
These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. No te:...
Mopar Exhaust Manifold to Headpipe Flange - 2-1/2" i.d. with 4" Center to Center on Bolt Holes
Classic $12.99 ea
1971-74 Mopar 340/360 HP Exhaust Manifold Fastener Set OE Style
If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.
1972-74 Challenger, Barracuda, Cuda; Exhaust Tip Hanger Bracket; Each
Reproduction of the original exhaust tip hanger bracket for 1972-74 Dodge and Plymouth E-Body models. This bracket bolts to the rear frame rail and supports the exhaust hanger. Each bracket features correct bolt hole...
1972-74 Challenger, Barracuda, Cuda; Exhaust Tip Hanger Bracket; Each
Classic $27.99 ea
Exhaust Manifold Gaskets Small Block Ultra-Seal 1.00" X 1.64"
These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.
Mopar Exhaust Manifold Flange Gasket - 2-1/2" (2 req'd)
These flanges connect the exhaust manifold to the head pipe. Black asbestos material, 1/16" thk. 2-1/2" I.D; 4" center-to-center flange bolts. 2 required.
Mopar Exhaust Manifold Flange Gasket - 2-1/4" (2 req'd)
These flange gaskets connect the exhaust manifold to the head pipe. Flanges made from 1/16" material and has a 2-1/4" diameter hole in the center. 2 required.
1966-71 Hemi Heat Tube Flange Gasket Set - Includes 3 Gaskets
This 3 piece flange gasket set fits between the heat tubes on Mopar models equipped with Hemi engine. Made of asbestos.
Mopar Exhaust Manifold to Headpipe Flange - 2-1/4" i.d. with 3-1/2" Center to Center on Bolt Holes
These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. Note:...
Mopar Exhaust Manifold to Headpipe Flange - 2-1/4" i.d. with 3-1/2" Center to Center on Bolt Holes
Classic $12.99 ea
Exhaust Manifold Gaskets Small Block Copper-Seal 1.00" X 1.64"
These gaskets seal exhaust manifolds to the cylinder heads. These Copper-Seal gaskets use "dead-soft" solid copper for extreme heat applications such as turbo-charged vehicles. Sold in pairs.
1971-74 Mopar B/E-Body Tailpipe Hanger RH
This is the right side hanger mounted up by the shock absorber on most B and E-Body applications. Will fit 1971-74 B-Body and 1971-73 E-Body models.
Exhaust Manifold Gaskets Small Block Performance 1.30" X 1.80"
These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.
Exhaust Manifold Gaskets Small Block Ultra-Seal 1.30" X 1.80"
These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.