Product#: 1253527

1968-81 GM; Wiring Harness J-Strap Retainer Clip; 2-7/8" Long

Reproduction wiring harness retainer clip mounted on the firewall of a wide variety of GM vehicles from the 1960's through the 1970's. This metal clip is sometimes welded, instead of bolted, to the firewall to hold the main...


Product#: 3921923

1967-68 Camaro, 1968 Full Size, 1968-74 Corvette; Crankshaft Pulley; 396, 427, 454 Big Block; Double Groove; Stamped Steel; 6-3/4" OD

Reproduction double groove crankshaft pulley for 1966-68 Chevelle, Malibu, El Camino, 1968 full size models, 1967-68 Camaro, and 1968-74 Corvette models with Big Block 396 and 427 special high performance, and 454 engines....


Product#: 154220

1962-1996 Harmonic Balancer Attaching Bolt Set, SB Chevrolet

Correct reproduction harmonic balancer attaching bolt kit, ?Delta? headmark, 7/16-20 x 2-1/4", includes 1 bolt, and 2 washers. All small blocks w/Sp.Hi-Perf., or crank with threaded end. GM Full Size passenger car...


Product#: A9723113

Serpentine Front Drive System, LS1/2/3/6 Engs with A/C & P/S With Tuff Stuff Water Pump - Machined

All American Billet Serpentine Kits are a great way to clean up any engine compartment. You have a choice of Machined Finished, Polished, or Black Silverline - Black Anodized with machined highlights for an aggressive modern...


Product#: 66518BKC

Black Small Block 8" Proform Harmonic Balancer Cover

Add a high performance look to your harmonic balancer by adding this aftermarket cover.


Product#: HD100023

400 Harmonic Pro/Sport High Carbon Steel 6.61" x 1.52" External Balance Harmonic Balancer

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: 1620101

262-350 / 409 6-1/4" Internal Balance Fluidampr Harmonic Damper

Fluidampr performance harmonic balancers and dampers contain no rubber or elastomers. Instead, they are filled with a viscous silicone-based liquid that doesn't wear out after time. The liquid absorbs virtually all torsional...


Product#: 1720101

262-350 7-1/4" Internal Balance Fluidampr Harmonic Damper

Fluidampr performance harmonic balancers and dampers contain no rubber or elastomers. Instead, they are filled with a viscous silicone-based liquid that doesn't wear out after time. The liquid absorbs virtually all torsional...


Product#: HD100011

400ci Pro/Race All Steel 6.61" x 1.54" External Balance Race Harmonic Balancer

Pro/Race harmonic dampers are designed for a wide range of high performance applications. This "all steel" damper is direct replacements for factory cast iron versions which may fracture or disintegrate at high RPM and are...


Product#: HD100016

283-350 Pro/Sport High Carbon Steel 6.10" x 1.52" Internal Balance Harmonic Balancer

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: HD100014

283-350 with Supercharger Pro/Race All Steel 6.61" x 1.54" Internal Balance Race Harmonic Balancer

Pro/Race harmonic dampers are designed for a wide range of high performance applications. This "all steel" damper is direct replacements for factory cast iron versions which may fracture or disintegrate at high RPM and are...


Product#: HD100012

396-427 Pro/Race All Steel 7.01" x 1.73" Internal Balance Race Harmonic Balancer

Pro/Race harmonic dampers are designed for a wide range of high performance applications. This "all steel" damper is direct replacements for factory cast iron versions which may fracture or disintegrate at high RPM and are...


Product#: HD100024

LS1 Harmonic Balancer 25% Under Drive Sport/Damper Only/11.07/6.14/2.53/3.88

The Pro/Sport under drive dampers are smaller in diameter than factory to slow the speed of belt-driven accessories. Since performance engines are generally used at higher RPM, the belt speed can be reduced to save horsepower...


Product#: 141725-BCHW

Chevy Bowtie Emblem 6-3/4" Chrome Harmonic Balancer Cover. Chevy S/B.

These patented harmonic balancer covers offer improved readability, more stable Top Dead Center indication and timing accuracy, enhanced appearance for a previously ignored underhood area, and the elimination of timing tapes...


Product#: 141727-BCHW

Chevy Bowtie Emblem 6-3/4" Black Harmonic Balancer Cover. Chevy S/B.

These patented harmonic balancer covers offer improved readability, more stable Top Dead Center indication and timing accuracy, enhanced appearance for a previously ignored underhood area, and the elimination of timing tapes...


Product#: 141726-BCHW

Chevy Bowtie Emblem 8" Chrome Harmonic Balancer Cover. Chevy S/B.

These patented harmonic balancer covers offer improved readability, more stable Top Dead Center indication and timing accuracy, enhanced appearance for a previously ignored underhood area, and the elimination of timing tapes...


Product#: MP212601

Chevrolet Big Block Clear Powder Coat March Revolver Alt, AC and PS (Remote Style) Serpentine Set

This serpentine conversion set offers the same combination of style and low price as the popular Style Track alternator, AC and power steering kit but with cool Revolver styling. The highly styled one piece bracket provides...


Product#: 154212

1962-1982 Crankshaft Pulley Attaching Bolt Set, SB Chevrolet

Correct reproduction crankshaft pulley bolt kit, includes (3) bolts and (3) lock washers. For use on small block Chevrolet engines with balancer which is 1-3/4" or 1-1/4" thick. GM Full Size passenger car applications:...


Product#: 22072MP

March Performance Chevy Small Block Long Water Pump Ultra Serpentine Pulley and Bracket Kit; Clear Powder Coat; For Keyway PS Pump and 7176 AC Compresor

Simple yet exceptionally styled, this new March Performance "Mid Mount" alternator, power steering and A/C serpentine set from March Performance offers an exciting new look. CNC machined from solid billet 6061-T6 aluminum for...


Product#: Z8183

Serpentine Belt Idler Pulley/Bracket With LH Alternator Mount

Idler pulleys are used when excessive free belt length causes belt-flapping or when more belt contact is desired on the pulley. Note: For use with Z8181 (sold separately).


Product#: MP202601

Chevrolet S/B Clear Powder Coated March Ultra Drive Front Mount Alt, AC and PS Serpentine Set

This system has been designed for mounting accessories below the valve covers and in between the width of the heads. Precision CNC machined from 6061-T6 aluminum for strength and perfect fit. Hardcoated on high wear areas....


Product#: HD100019

283-350 Pro/Sport High Carbon Steel 6.61" x 1.52" Internal Balance Harmonic Balancer

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: Z81501

Serpentine Belt Idler Pulley/Bracket With LH Alternator Mount

Idler pulleys are used when excessive free belt length causes belt-flapping or when more belt contact is desired on the pulley. Note: For use with Z8104 (sold separately).


Product#: HD100010

283-350 Pro/Race All Steel 6.61" x 1.54" Internal Balance Race Harmonic Balancer

Pro/Race harmonic dampers are designed for a wide range of high performance applications. This "all steel" damper is direct replacements for factory cast iron versions which may fracture or disintegrate at high RPM and are...


Product#: HD100022

283-350 Pro/Sport High Carbon Steel 6.61" x 1.52" Internal Balance Harmonic Balancer

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: 141729-BCHW

Chevy Bowtie Emblem 8" Chrome Harmonic Balancer Cover. Chevy B/B.

These patented harmonic balancer covers offer improved readability, more stable Top Dead Center indication and timing accuracy, enhanced appearance for a previously ignored underhood area, and the elimination of timing tapes...


Product#: HD100001

283-350 Pro Street Bonded Nodular Iron 6.10" x.760 Internal Balance Street Harmonic Balancer

This Pro/Street bonded nodular iron damper features special splines to enhance bonding between the elastomer, inner hub and outer ring preventing any radial movement. PRO/STREET Harmonic Dampers feature: Nodular Iron Constru...


Product#: HD100006

400ci Pro/Street Bonded Nodular Iron 8.00" x 1.47" External Balance Street Harmonic Balancer

This Pro/Street bonded nodular iron damper has special splines to enhance bonding between the elastomer, inner hub, and outer ring preventing any radial movement. PRO/STREET Harmonic Dampers feature: Nodular Iron Constructio...


Product#: 154211

1965-1974 Harmonic Balancer Attaching Bolt Set, BB Chevrolet

Correct reproduction harmonic balancer bolt kit, 1/2-20 x 1-1/2", includes 1 bolt & 2 washers. All with big block. GM Full Size passenger car applications: 1965-1974 Camaro applications: 1967-1974 Chevy II/Nova applications:...


Product#: HD100002

283-350 Pro/Street Bonded Nodular Iron 6.75" x 1.32" Internal Balance Street Harmonic Balancer

This Pro/Street bonded nodular iron damper has special splines to enhance bonding between the elastomer, inner hub and outer ring preventing any radial movement. PRO/STREET Harmonic Dampers feature: Nodular Iron Construction...


Product#: A9733111

1965-81 GM Serpentine Front Drive System; Big Block Chevy, with A/C & Power Steering; Machined

All American Billet Serpentine Kits are a great way to clean up any engine compartment. You have a choice of Machined Finished, Polished, or Black Silverline - Black Anodized with machined highlights for an aggressive modern...


Product#: HD100005

283-350 Pro/Street Bonded Nodular Iron 8.00" x 1.47" Internal Balance Street Harmonic Balancer

This Pro/Street bonded nodular iron damper has special splines to enhance bonding between the elastomer, inner hub, and outer ring preventing any radial movement. PRO/STREET Harmonic Dampers feature: Nodular Iron Constructio...


Product#: KW938

1964-74 Chevrolet; Power Steering Drive Crankshaft Pulley; Single Groove; Various Models

Replace the damaged or missing original crankshaft power steering drive pulley with this quality reproduction designed for use with various 1964-74 Chevrolet models as listed.. The drive pulley gets added to the existing...


Product#: 154213

1965-1974 Crankshaft Pulley Attaching Bolt Set, BB Chevrolet

Correct reproduction crankshaft pulley attaching bolt kit, "TR" headmark, 3/8-16 x 1-1/4". Grade 5 with lock washers. GM Full Size passenger car applications: 1965-1974 Camaro applications: 1967-1974 Chevy II/Nova...


Product#: HD100018

LS1/LS2/LS3/LS6 Harmonic Balancer Sport/Internal/12.7/7.52/2.47/2.86

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: HD100003

396-427 Pro/Street Bonded Nodular Iron 8.00" x 1.93" Internal Balance Harmonic Balancer

This Pro/Street bonded nodular iron damper features special splines to enhance bonding between the elastomer, inner hub and outer ring preventing any radial movement. PRO/STREET Harmonic Dampers feature: Nodular Iron Constru...


Product#: HD10030

Small Block Pro/Sport Counterweight

Pro Race Performance externally balanced harmonic balancers feature weights bolted in place which may be removed for neutral or internally balanced application. Internally balanced balancers can be used on an external...


Product#: HD10028

Small Block Pro/Street Counterweight

Pro Race Performance externally balanced harmonic balancers feature weights bolted in place which may be removed for neutral or internally balanced application. Internally balanced balancers can be used on an external...


Product#: HD10029

Small Block Pro/Race Counterweight

Pro Race Performance externally balanced harmonic balancers feature weights bolted in place which may be removed for neutral or internally balanced application. Internally balanced balancers can be used on an external...


Product#: HD100017

LS1 Harmonic Balancer Sport/Internal/12.4/7.52/2.31/3.70

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: HD100004

454 Pro/Street Bonded Nodular Iron 8.00" x 1.93" External Balance Harmonic Balancer

This Pro/Street bonded nodular iron damper features special splines to enhance bonding between the elastomer, inner hub and outer ring preventing any radial movement. PRO/STREET Harmonic Dampers feature: Nodular Iron Constru...


Product#: HD100013

454 Pro/Race All Steel 7.01" x 1.73" External Balance Race Harmonic Balancer

Pro/Race harmonic dampers are designed for a wide range of high performance applications. This "all steel" damper is direct replacements for factory cast iron versions which may fracture or disintegrate at high RPM and are...


Product#: HD100020

396-427 Pro/Sport High Carbon Steel 7.01" x 1.73" Internal Balance Harmonic Balancer

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: HD100015

396-427 with Supercharger Pro/Race All Steel 7.01" x 1.73" Internal Balance Race Harmonic Balancer

Pro/Race harmonic dampers are designed for a wide range of high performance applications. This "all steel" damper is direct replacements for factory cast iron versions which may fracture or disintegrate at high RPM and are...


Product#: HD100021

454 Pro/Sport High Carbon Steel 7.01" x 1.73" Internal Balance Harmonic Balancer

Pro/Sport harmonic dampers protect against harmful engine vibrations that can lead to valvetrain damage, rapid bearing and timing chain wear or ultimately crankshaft breakage. Machined to exacting tolerances and assembled...


Product#: HD100025

LS1/LS2/LS3/LS6 Harmonic Balancer 25% Under Drive Sport/Damper Only/11.76/6.75/2.83/3.03

The Pro/Sport under drive dampers are smaller in diameter than factory to slow the speed of belt-driven accessories. Since performance engines are generally used at higher RPM, the belt speed can be reduced to save horsepower...


Product#: Z8151

1965-Up Chevrolet Big Block Short Water Pump With Alternator / AC Serpentine Idler Pulley Set

Idler pulleys are used when excessive free belt length causes belt-flapping or when more belt contact is desired on the pulley. Note: For use with Z8138 bracket set (sold separately).


Product#: MP211601

Chevrolet Small Block Clear Powder Coat March Revolver Alt, AC and Remote PS Serpentine Set

This serpentine conversion set offers the same combination of style and low price as the popular Style Track alternator, AC and power steering kit but with cool Revolver styling. The highly styled one piece bracket provides...


Product#: HD10031

Big Block Pro/Street Counterweight

Pro Race Performance externally balanced harmonic balancers feature weights bolted in place which may be removed for neutral or internally balanced application. Internally balanced balancers can be used on an external...


Product#: HD10033

Big Block Pro/Sport Counterweight

Pro Race Performance externally balanced harmonic balancers feature weights bolted in place which may be removed for neutral or internally balanced application. Internally balanced balancers can be used on an external...


Product#: G9363

2003-06 C/K Truck Crankshaft Balancer

Replace the damaged or missing original crankshaft balancer on your engine with a Genuine GM service part. For vehicles with LSx swaps, you'll need to know what balancer you have to be able to order the right belt system. The...


Product#: HD10032

Big Block Pro/Race Counterweight

Pro Race Performance externally balanced harmonic balancers feature weights bolted in place which may be removed for neutral or internally balanced application. Internally balanced balancers can be used on an external...


Product#: A9721113

Serpentine Front Drive System, LS1/2/3/6 Engs with A/C & P/S With Tuff Stuff Water Pump - Polished

All American Billet Serpentine Kits are a great way to clean up any engine compartment. You have a choice of Machined Finished, Polished, or Black Silverline - Black Anodized with machined highlights for an aggressive modern...


Product#: 175013

LS7 Black Hardcoat Finish Vintage Air Front Runner Drive Set (Without Power Steering)

This Vintage Air Front Runner™ Drive system for GM LS7 engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...


Product#: 174058

Chevrolet Big Block with Power Steering Bright Finish Vintage Air Front Runner Drive Set with Pump

This Vintage Air Front Runner Drive system for Chevrolet Big Block engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...


Product#: 175010SCA

Chevrolet Small Block without Power Steering Black Finish Vintage Air Front Runner Drive Set

This Vintage Air Front Runner Drive system for Chevrolet Small Block engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...