Product#: E2194

Edelbrock Performer Manifold, 253-308 Holden

This Edelbrock Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm....

Product#: 20574

Manifold Coolant Stop Leak

1995-2003 GM vehicles with 3.8L series 2 engines (vin K - RPO L36) have been experiencing excessive coolant consumption or coolant leakage near or under the throttle body and intake manifold. This is caused when the EGR tube...

Product#: E27013

1955-86 Sbc Edelbrock Performer EPS Intake Manifold - Black

Edelbrock's Dual Plane Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 RPM when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an...

Product#: E7501

Performer RPM Air Gap Intake Manifold; Chevy Small Block w/o EGR; Square Bore; Natural Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E27011

1955-86 Chevrolet Small Block Edelbrock Performer EPS Non EGR Intake Manifold with Polished Finish

Edelbrock's Dual Plane Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 RPM when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an...

Product#: E75013

Performer RPM Air Gap-Nascar Edition Manifold; For Small Block Chevy-Non-EGR; Black Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E2703CP

Edelbrock Performer EPS Intake Manifold; w/Oil Fill Tube; 1955-86 262-400 Small-Block Chevrolet V8; Chrome Plasma

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. This intake manifold combines...

Product#: E7501CP

Edelbrock Performer RPM AIR-Gap Intake Manifold; 262-400 Small Block Chevy V8; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our...

Product#: E2701CP

Edelbrock Performer EPS Intake Manifold; 1955-86 262-400 Small-Block Chevrolet V8; Chrome Plasma Finish

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented...

Product#: E2101

1955-86 Chevrolet Small Block without EGR Edelbrock Performer Natural Finish 4 bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E75011

Performer RPM Air Gap Manifold; For Small Block Chevy; Non-EGR; Polished Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: AK122A

Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Chrome

These reproduction bolts go one step further than the original style. They are produced in polished chrome. Set includes 12 bolts and 12 washers.

Product#: OF5416

1962-74 Chevrolet, Pontiac Inline-6; 194, 230, 250, 292 ci; Offenhauser Single-Quad Intake Manifold

Offenhauser single quad manifolds are ideal for situations where you want to get more performance, a nostalgic look, but still have a custom appearance. Precision-machined from cast aluminum , these manifolds are designed to...

Product#: E2161CP

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Chrome Plasma

Edelbrock part Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. This version comes with a brilliant Chrome Plasma finish that is durable and...

Product#: E2161BP

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Black Plasma

Edelbrock part Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. This version comes with a beautiful reflective Black Plasma finish that is...

Product#: OF5253

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: E7101CP

Edelbrock Performer RPM Intake Manifold; Chevrolet 262-400 Small-Block V8; Chrome Plasma Finish

Edelbrock Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high-performance street/marine engines. Provides power like a single-plane and throttle...

Product#: E2701

1955-86 Chevrolet 265-400 Small Block without EGR Performer EPS Natural Finish Intake Manifold

The Performer EPS is optimized to deliver superior performance with Edelbrock square-bore Performer Series carburetors on 1986 and earlier small block Chevys. This manifold has a runner design that's tuned for peak power...

Product#: E2701BP

Edelbrock Performer EPS Intake Manifold; 1955-86 262-400 Small-Block Chevrolet V8; Black Plasma Finish

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented...

Product#: E2703BP

Edelbrock Performer EPS Intake Manifold; w/Oil Fill Tube; 1955-86 262-400 Small-Block Chevrolet V8; Black Plasma

Edelbrock Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. This intake manifold combines...

Product#: E7501BP

Edelbrock Performer RPM AIR-Gap Intake Manifold; 262-400 Small Block Chevy V8; Black Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our...

Product#: E7101BP

Edelbrock Performer RPM Intake Manifold; Chevrolet 262-400 Small-Block V8; Black Plasma Finish

Edelbrock Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high-performance street/marine engines. Provides power like a single-plane and throttle...

Product#: OF5694

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E2703

Performer EPS Manifold 55-86 Small Block-With Filler Tube And Push-In Breather Cap

Performer EPS Manifold-non EGR for 1967-86 small block Camaro. The Performer EPS is optimized to deliver superior performance with Edelbrock square-bore Performer Series carburetors on 1986 and earlier small block Chevys....

Product#: E21011

1955-86 Chevrolet Small Block without EGR Edelbrock Performer Polished Finish 4 bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: OF5693

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E3701

1955-86 Chevrolet Small Block with EGR Edelbrock Performer Natural Finish 4bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E71013

1955-86 Chevrolet Small Block without EGR Performer RPM; Square Bore Intake Manifold; Black Finish

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. Has provisions to machine for an oil...

Product#: E26011

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Polished Aluminum

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: E26013

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Black

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: E27163

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Black Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: E5418

1955-86 Chevrolet Small Block Edelbrock Three Deuce Intake Manifold For Use with 3 Bolt Carburetors

This triple deuce idle to 5500 RPM non EGR manifold is designed for 1955-86 262-400 c.i.d. small block Chevrolet engines. The manifold has a balanced 180° firing order port runner arrangement and contains an exhaust gas...

Product#: OF5254

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Triple Manifold Intake Manifold; 3 Large Base Rochester 2GC Carbs

Product#: OF5616

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E5419

1955-86 Chevrolet Small Block Edelbrock Three Deuce Intake Manifold For Use with 4 Bolt Carburetors

This triple deuce idle to 5500 RPM non EGR manifold is designed for 1955-86 262-400 c.i.d. small block Chevrolet engines. The manifold has a balanced 180° firing order port runner arrangement and contains an exhaust gas...

Product#: OF5603

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Spread Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: OF5617

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Spread Bore; Low Profile

Offenhauser 360 Degree Equa-Flow Single-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E71011

Edelbrock Performer RPM Intake Manifold 55-86 Small Block, Polished Finish, Without EGR

Performer RPM manifolds are dual-plane, high-rise intake manifolds with a 180+ firing order to produce incredible top end horsepower while retaining good throttle response. Their larger plenums and runners match the...

Product#: OF6008DP

1957-86 Chevrolet SBC V8; 265-400 cid; Offenhauser Dual Port 360 Degree Intake Manifold; Single Quad; Spread Bore

Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller...

Product#: OF5744

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Spread Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E7525

1955-86 Chevy Small Block w/o EGR Edelbrock RPM Dual-Quad Air Gap Natural Finish Intake Manifold

Convert your 265-400ci small block from a single carburetor to a pair of them with this RPM Air Gap Dual Quad intake! The air-gap design features an open air space that separates the runners from hot engine oil, resulting in...

Product#: OF6045DP

1966-86 Chevrolet BBC V8; 396-454 cid; Offenhauser Dual Port 360 Degree Intake Manifold; Single-Quad; Square Bore; High-Rise; Oval Port

Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller...

Product#: 154215

1955-1982 Stainless Steel Washer Set; Small Block; for Aluminum Intake Manifolds;12 piece

1956-1982 aluminum intake manifold stainless steel washer set for small block engines. Though not originally so equipped, these special washers are very helpful in protecting the aluminum which is directly in contact with...

Product#: E7101

1955-86 Chevrolet Small Block without EGR Performer RPM Natural Finish Square Bore Intake Manifold

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. Has provisions to machine for an oil...

Product#: AFR4812

AFR Eliminator SBC Dual Plane Aluminum Intake Manifold

Fitment Note: Square bore carburetors only and will not fit under stock Corvette hood. Will not fit TBI/TPI 72° Intake Bolt. Cast and machined in the USA

Product#: E7516CP

Edelbrock Performance RPM Air-Gap Manifold; Small-Block Chevy Vortec; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is based on the powerful Performer RPM Vortec. This single four-barrel intake is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock...

Product#: E7516BP

Edelbrock Performance RPM Air-Gap Manifold; Small-Block Chevy Vortec; Black Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is based on the powerful Performer RPM Vortec. This single four-barrel intake is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock...

Product#: E2716BP

Edelbrock Performer EPS Manifold; Small-Block Chevy Vortec; Black Plasma Finish

Edelbrock Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver...

Product#: E2716CP

Edelbrock Performer EPS Manifold; Small-Block Chevy Vortec; Chrome Plasma Finish

Edelbrock Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver...

Product#: 3972116

LT1 Hi-Performance Aluminum Intake Manifold; Dual Plane; Small Block; Features Winters Snowflake Logo and 3972116 GM Casting Number

This is a reproduction of the 1970 GM HI-performance LT1 aluminum intake manifold sold over the counter as a performance part. This part number was not used on the assembly line, however it is a great performance intake for...

Product#: E7561CP

Edelbrock Performer RPM Air-Gap Intake Manifold; Chevrolet 396-502 Big-Block V8 Oval Port; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap Oval Port intake manifold is designed for high performance 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM...

Product#: OF5745

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual-Quad; Spread Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E7201

1955-86 Small Block Chevrolet; Edelbrock Intake Gasket Set

These gaskets are matched to Edelbrock Performer, Performer RPM and Victor Jr. cylinder heads and manifolds and designed to optimize performance and flow. New micropore synthetic fiber composite construction makes these...

Product#: E7562CP

Edelbrock Performer RPM 2-R Intake Manifold; Chevrolet 396-502 Big-Block V8; Chrome Plasma

Edelbrock Performer RPM Air-Gap 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads. The open air space separates the runners from the hot engine oil, and as a...

Product#: E21613

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Black Finish

Product#: 109999

Intake Manifold Heat Plate; GM 6 Cylinder 194/230/250/292

Installing aftermarket exhaust manifolds or headers on 194, 230, 250 & 292 ci 6-cylinder GM engines requires an intake manifold heating system for proper performance. The original intake and exhaust manifolds were connected...

Product#: E27014

1955-86 Chevrolet 265-400 Small Block without EGR Performer EPS Endurashine Finish Intake Manifold

The Performer EPS is optimized to deliver superior performance with Edelbrock square-bore Performer Series carburetors on 1986 and earlier small block Chevys. This manifold has a runner design that's tuned for peak power...

Product#: E7561BP

Edelbrock Performer RPM Air-Gap Intake Manifold; Chevrolet 396-502 Big-Block V8 Oval Port; Black Plasma Finish

Edelbrock Performer RPM Air-Gap Oval Port intake manifold is designed for high performance 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM...

Product#: E7562BP

Edelbrock Performer RPM 2-R Intake Manifold; Chevrolet 396-502 Big-Block V8; Black Plasma

Edelbrock Performer RPM Air-Gap 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads. The open air space separates the runners from the hot engine oil, and as a...

Product#: K0117

1965-90 Chevrolet; Aluminum Intake Manifold Bolt Set; Big Block; with "A" Headmark

Reproduction intake manifold bolt for various 1965-90 Chevrolet big block (396, 402, 427, 454) models. Each bolt is manufactured to correct factory specifications and features the correct "A" head marking for 1965-72 models....