Product#: BS400961

1965-79 Chevrolet; Passenger Car and Truck; Rear Main Seal Set; V8; BB; Rubber; 2-Piece

High quality Fel-Pro crankshaft rear main seal set for various 1965-79 Chevrolet V8 big block engines. When you install a Fel-Pro gasket you can be sure that you have selected a premium part for the repair job. Fel-Pro...


Product#: G13214

LS Front Crankshaft Seal - All LS Engines

ACDelco GM Original Equipment Multi-Purpose Seals are high quality seals, which seal in lubricant and keep dirt and water out. Made from rubber or plastic composite materials, they conform to the sealing surface to provide...


Product#: MN2024

1971-91 Mopar 383 / 400 Big Block Engine Teardown Gasket Set

This Mopar Performance engine teardown gasket set gives you all the gaskets needed for a minor engine teardown, including oil pan, cylinder heads, valve covers, timing chain cover, intake manifold and oil or fuel pump....


Product#: G8757

Oil Pan Drain Plug Gasket; M12 id X M22 od x 1.8 thick

This is a correct replacement gasket which is used to seal the oil pan drain plug and keep it from leaking. Be sure to replace the gasket whenever replacing the drain plug. Measures M12 id X M22 od x 1.8 thick. Replaces OE...


Product#: MN2026

Mopar Performance Hemi Teardown Gasket Set

Mopar Performance engine teardown gasket sets give you all the gaskets needed for a minor engine teardown, including oil pan, cylinder heads, valve covers, timing chain cover, intake manifold and oil or fuel pump. Note: These...


Product#: MN2022

1971-91 Mopar 340 / 360 Engine Teardown Gasket Set

This Mopar Performance engine teardown gasket set gives you all the gaskets needed for a minor engine teardown, including oil pan, cylinder heads, valve covers, timing chain cover, intake manifold and oil or fuel pump....


Product#: MN2021

1992-03 Mopar 318 Magnum Engine Teardown Gasket Set

This Mopar Performance engine teardown gasket set gives you all the gaskets needed for a minor engine teardown, including oil pan, cylinder heads, valve covers, timing chain cover, intake manifold and oil or fuel pump....


Product#: MN1059

1964-76 Mopar B / Rb Big Block Fel Pro Oil Pan Gasket Set

this service replacement oil pan gasket set may differ slightly in appearance from OE but will install and function exactly as original. Applications: 1964-71 383ci engine 1966-76 440ci engine 1964-65 426ci w edge engine...


Product#: MD40700

1965-76 Mopar 383-440 Milodon Oil Pan Gasket / Seal Set

If you're ordering a Milodon pan, you'll need a Milodon gasket and seal set to go with it. Milodon pan gaskets are crush-proof and resistant to gas, alcohol and fuel. Made in USA


Product#: MN1988

Mopar Performance Big Block Composition Head Gasket (Up To 4.380" Bore)

Thick composite material gasket (0.040" to 0.042") can be used for replacement or competition applications up to 12.5:1 compression ratio. Sold as each.


Product#: MN1986

Mopar Performance Small Block Composition Head Gaskets (Up To 4.060" Bore)

Thick, 0.040" to 0.042" gaskets can be used for replacement or competition applications up to 12.5:1 compression ratio. Sold each. 2 required Small block four-bolt pattern.


Product#: MN2036

1964-91 Mopar Small Block Performance Valve Cover Gaskets

Mopar Performance valve cover gaskets. New gaskets are a must when removing or replacing your valve covers.


Product#: D440219

Mopar Logo RB/Big Block Black Crinkle Timing Chain Cover

Mopar logo timing chain cover for various Chrysler big-block engines. Applications include Charger, Barracuda, Roadrunner, and Challenger equipped with RB V8 motors. This high-quality cover is an upgrade in both appearance...


Product#: 66237-BCHW

Billet Aluminum Backing Plate For Chrysler S/B Water Pump, Natural

This natural finish billet aluminum backing plate is compatible with any electric water pump that mounts to the stock Chrysler timing cover. This backing plate is INCLUDED with all PROFORM Chrysler S/B Electric Water Pumps.


Product#: D440216

Mopar Logo RB/Big Block Chrome Timing Chain Cover

Mopar logo timing chain cover for various Chrysler big-block engines. Applications include Charger, Barracuda, Roadrunner, and Challenger equipped with RB V8 motors. This high-quality cover is an upgrade in both appearance...


Product#: MN2042

1972-76 Mopar 360 Mopar Performance Oil Pan Gasket Set

This Mopar Performance gasket set is needed when removing or replacing your oil pan. Why mess around with aftermarket gaskets when these are still readily available. Each set contains two pan gaskets and two end seals.


Product#: MN1064

1960-76 Mopar Oil Pan Drain Plug & Gasket

Factory replacement oil pan drain plug and gasket for all 1960-76 Mopar models. Each OE drain plug also includes the correct gasket.


Product#: MN1992

1965-76 Mopar Performance Valve Stem Seal Set

Made of high-temp viton material, these valve seals feature a full or semi-umbrella shape for dual-purpose. Helps prevent oil seepage down valve guides. Not recommended for dual valve springs. Sold in sets of 16. Applicat...


Product#: MD7104

1966-76 Mopar B & Rb Engine 361-440ci & 426 Hemi 7Qt Oil Pan Gasket

Hamburger's "Street Performance" steel oil pans feature increase oil capacity for improved bearing life and engine durability with the added benefit of lower oil temperatures. Seal that high capacity oil pan the right way by...


Product#: MD40650

1972-76 Mopar 360 Ci Milodon Oil Pan Gasket / Seal Set

If you're ordering a Milodon pan, you'll need a Milodon gasket and seal set to go with it. Milodon pan gaskets are crush-proof and resistant to gas, alcohol and fuel. Made in USA


Product#: MN1061

1971-74 Mopar 360 Fel-Pro Oil Pan Gasket Set

this service replacement oil pan gasket set may differ slightly in appearance from OE but will install and function exactly as original. Applications: 1971-74 360ci Engine