Product#: 60049

1967-76 Buick 400/430/455 cid Big Block V8; Edelbrock Performer RPM Cylinder Head

Edelbrock Performer RPM Cylinder Heads are designed for 400, 430 and 455 c.i.d. Buick engines. These heads are perfect for street performance, daily drivers, street rods and muscle cars where more performance is needed. The...

Product#: E77790

Big Block Edelbrock Red Roller Rocker Arms- 7/16", 1.7 Ratio

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...

Product#: 66864-BCHW

Buick 455 Shaft-Mounted Billet Aluminum Roller Rockers

Take your Buick valve train to the next level of performance with a friction-reducing roller rocker system. This shaft mounted roller rocker system will fit standard stage 1 and 2 cylinder heads, and is designed for 1.65...

Product#: 222081A

1967-76 Buick 400/430/455; High Energy 206/206 Hydraulic Flat Tappet Camshaft

These high-torque Comp Cams work very well on the street. Designed for engines with 9:1 or less compression ratio. They can be used in conjunction with most stock components, including intake manifolds, exhaust manifolds,...

Product#: 66409C

proform Big Block Push Rod Set 3/8" +.405 Tall Deck

Big Block Push Rod Sets: Heat treated one-piece pushrod sets for ôTall Deckö applications. Includes 16 pushrods in a clamshell package.

Product#: 66935

Proform 3/8"-24 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.

Product#: 60116

1955-95 GM Small Block; Comp Cams Valve Lock Set

This hardened steel, single groove Steel Street Lock with 7° lock angle and 11/32" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street applications with lighter valve...

Product#: E77770

Small Block Edelbrock Red Roller Rocker Arms- 1.5 Ratio For 3/8" Stud

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...

Product#: 222080A

1967-76 Buick 400/430/455; Xtreme Energy 230/236 Hydraulic Flat Tappet Camshaft

Comp Cams Xtreme Energy series are perfect for any street or street/strip application where both throttle response and top-end horsepower is desired. These camshafts are designed to take advantage of the latest and greatest...

Product#: 222082A

1967-76 Buick 400/430/455; High Energy 212/212 Hydraulic Flat Tappet Camshaft

These high-torque Comp Cams work very well on the street. Designed for engines with 9:1 or less compression ratio. They can be used in conjunction with most stock components, including intake manifolds, exhaust manifolds,...

Product#: 222083A

1967-76 Buick 400/430/455; High Energy 218/218 Hydraulic Flat Tappet Camshaft

These high-torque Comp Cams work very well on the street. Designed for engines with 9:1 or less compression ratio. They can be used in conjunction with most stock components, including intake manifolds, exhaust manifolds,...

Product#: E9648

Edelbrock Hardened Steel Pushrod Set for Chevy 348/409 W-Series - Set of 16

Edelbrock pushrods are designed for Chevrolet 348/409 ?W? series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum...

Product#: 86516

1967-80 Buick 350/400/430/455 SB/BB; Pro Magnum Hydraulic Flat Lifter Set

Comp Cams Pro Magnum Hydraulic Lifters are specifically designed to perform at higher engine speeds. When engines are equipped with conventional hydraulic lifters, high RPM is limited by improper positioning of the internal...

Product#: 66950

1955-95 Chevrolet Small Block; 262-400 cid; Proform 3/8" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks through 1986...

Product#: 66951

1955-95 Chevrolet Small Block; 262-400 cid; Proform 7/16" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks with 7/16"...

Product#: 86916

1967-80 Buick 350/400/430/455 SB/BB; High Energy Hydraulic Flat Lifter Set

High Energy Hydraulic Lifters feature a patented metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve & pushrod seat is maintained, eliminating excessive oiling at high...

Product#: 74016

1967-87 Pontiac 326-455CI V8 Valve Spring Retainer Set

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with FEA...

Product#: AR134711

Chevrolet Small Block ARP 3/8"-24 Rocker Arm Studs

ARP high performance rocker arm studs for Chevrolet Small Block engines are made of 8740 chrome moly forgings and heat-treated to 180,000 psi. Excellent for E.T Bracket Racing, limited rule oval track competition and street...

Product#: 61116

Comp Cams Valve Lock Set; Super Locks; 10 Degree Angle; 11/32" Stem Size; 16 Qty

These Comp Cams 611-16 Steel Super Locks™ featuring a lash cap recess, 10° lock angle and 11/32" valve stem size are recommended for all race applications. Super Locks™ have a wider angle (10°) that better...

Product#: 50316

Comp Cams Valve Stem Seal Set; For 11/32" Valves &.530" Guides

Comp Cams valve stem oil seals positive stop teflon. Guide.530 in. Valve size 11/32 in. - 16. Made in USA Sold as a set of 16.