Product#: B12030K

Peri-Keps Hex Nuts 7/16" Hex with 7/8" Toothed Free Spinning Washer, Fits #14 Stud Size, 10 Pieces

Correct replacement self locking Peri-Keps nuts used on various GM tail light housings, 1/4 panel extensions and #14 stud tail lights. 7/16" hex with 7/8" OD toothed washer. 10 piece set. Correct hardware can make any...

Product#: 378428

Door or Tailgate Striker Plate Mounting Screw; 5/16-18 X 3/4; Phillips Head; Each

Reproduction 5/16-18 X 3/4; Phillips head zinc plated screw often used to install the door striker plate on various models. Sold individually. Use as required.

Product#: *A11109K

Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate, 10 Piece Set

Replacement bolt used on various GM, Ford, and Mopar vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Product#: B11445K

Mastic Sealer Washers, 1/2" Diameter, Seals Pal Nuts And Clip Nuts to Body Panel, 25 Piece Set

Replacement mastic sealer washers used to seal emblem studs and molding clips to the body on various GM vehicles. Use with molding nuts and thread cutting nuts. 25 piece set. Correct hardware can make any installation job...

Product#: *A15783K

Bolt, 5/16-18 X 7/8" Pointed Tip With Free Spinning Washer, Black Phosphate, 10 piece Set

Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...

Product#: *A977664K

Window Felt Retainer Clip, Style 2, Slotted Push In Type, Black Phosphate Coated, 10 Piece Set

Correct replacement window felt retaining clip used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *C15315

U-Nut Set; M6 - 1.0; Panel Range.030" to.160"; Black Phosphate; 25 Piece Set

Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160"). Set of 25 u-nuts. Specifications: OE #: 11503957 Quantity:...

Product#: *A2744K

Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: A8337

#8 SCREW SIZE J NUT

Product#: 92910

Body Hole Plug; Plastic; Universal; Fits a 1" Hole

Universal body plug. this plug fits a 1" hole. The head diameter is 1-3/8". Working thickness is.02-.10" Sold individually.

Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: A5713K

Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24

Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...

Product#: *SW500K

Phillips Head Trim Screw ; Oval ; Black #8 x 3/4", with #6 ; 10 Piece Set

Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...

Product#: 11503957

U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each

Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...

Product#: *A16240K

Voltage Regulator Rubber Well Nut, 10-24 Thread, Fits 3/8" Hole, 3 Piece Set

Correct replacement voltage regulator well nuts used on various GM passenger cars from 1963-1968 and truck models from 1963-1971. 10-24, fits 3/8" hole. Neoprene with captive brass nut. Correct hardware can make any...

Product#: 11429

U-Nut #10 Screw Size; Panel Clip; Phosphate; Each

Correct U-nut used on various GM vehicles including for the glove box of 1967-72 Chevrolet and GMC trucks. This part is original equipment style for multiple GM applications, and it can be used for a variety of other...

Product#: 10084

1955-74 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; Each

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a set of 10, refer to part...

Product#: *A8581K

Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon, 10 Piece Set

Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...

Product#: B11208

#8-18 X 3/4"Screw Phillips Oval Head

Product#: A1799

Phillips Oval Head Chrome Trim Screw; #8 x 3/4"; with Undersized # 6

Phillips Oval Head Tap Screw # 8 X 3/4 Chrome # 6 Head Specifications: Screw Size : #8 Length : 3/4" Head Style : Phillips Oval Point Type : A/AB Head Size : #6 Finish : Chrome

Product#: *A2752K

Wire Tail Molding Clip, #10-24, 1-3/4" Long, Green Dip Coated, 10 piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *8731909K

Weatherstrip Retaining Clip; Push-In Style; Head Diameter - 3/8"; Stem Diameter - 5/32"; Stem Length - 3/8"; Black Nylon; 10 Piece Set

Correct replacement weatherstrip push-in retaining clip used on various GM vehicles. Commonly used clip to retain the ends of door and roofrail seals, replacement style for door J-seals, door drain seals and other...

Product#: *A8377K

U-Type Extruded Clip Nut, Fits 5/16-18 Bolts, Black Phosphate Coated, 10 Piece Set

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these...

Product#: *A18395K

Window Felt Retainer Clip, Style 3, Slotted Push Down Type, Black Phosphate Coated, 10 Piece Set

Correct replacement window felt retaining clip used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A9756K

Bolt, 5/16-18 x 1" Flat Tip With Free Spinning Washer, Black Phosphate, 10 piece Set

Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...

Product#: *A3615K

BOLT, 5/16-18 X 3/4" Dog Point Tip With Hex Washer Head, Black Phosphate, 10 Piece Set

Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...

Product#: 9853

5/16-18" x 3/4" Bolt; With Stainless Steel Cap; Each

Reproduction 5/16-18" x 3/4" bumper bolt with stainless steel cap for various Ford and other models. Perfect as a replacement for the small 1964-70 Mustang front bumper end mounting bolt. Sold individually. Specifications:...

Product#: *MM2267K

Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: B11151

Tapping Screw; Hex Washer Head; #8-18 x 1/2" Long; Black Oxide

Hex, washer head #8-18 x 1/2 tapping screw, in phosphate and oil coating for various applications including mounting grill to various classic vehicles Screw Specs: Description : Tapping Screw Screw Size : #8 Length : 1/2"...

Product#: *A8865K

Round Push On Flat Nut, Fits 3/16" Stud Size, Zinc Plated, 10 Piece Set

Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: 347347

All Purpose Plastic Nut, # 8 Screw Size, Fits 5/16" Square Hole, Panel Range 1/16" - 5/32"

Attachment nut for Headlamp Bezels, Grill or Side Marker. For # 8 Screw Size, 5/16" Square hole, Panel Range 1/16" - 5/32" Sold individually. Buick Applications: 1976-82 Century Headlamp Bezel Nut 1976-81 Century Grill Nut...

Product#: 10362

1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Product#: *A3545K

Standard Hex Nut, Fits 3/8-16 Thread, Zinc Plated, 10 Piece Set

Standard replacement hex nut used on various GM vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: 5243

7/16-14 x 1-1/2"; Bumper Bolt; Stainless Steel Cap; Each

Reproduction bumper bolt that measures 7/16-14 x 1-1/2" with a stainless steel cap and round head willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company models. Sold...

Product#: *A784896K

Bolt, 5/16-18 x 1" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set

Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...

Product#: *3982098K

U-Type Extruded Clip Nut, Fits 1/4-20 Bolts, Black Phosphate Coated, 10 Piece Set

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these...

Product#: *A876257K

Bolt, 1/4-20 x 1-3/16" Dog Point Tip With Free Spinning Washer, Black Phosphate, 10 Piece Set

Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...

Product#: *A5571K

U-Type Clip Nut, Fits #8 Screw, Black Phosphate Coated

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these...

Product#: A9863

Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated

Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...

Product#: *A10055K

U-Type Extruded Clip Nut, Fits 3/8-16 Bolts, Black Phosphate Coated, 10 Piece Set

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these...

Product#: 4492963K

Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10

Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...

Product#: 10182

Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide

This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.

Product#: A2806

Molding Screw; Phillips; 8-18 x 5/8"; 13/32" Diameter Washer Head; Chrome Plated

Reproduction phillips head tapping screw for a variety of uses on various makes and models including for attachment of the kick panels on 1964-68 Ford Mustang models. Each screw measures # 8 x 5/8" long and features a 13/32"...

Product#: *C15320

1982-92 Camaro; Front Bumper & Valance Panel; Hex Head Sems Bolt; M6-1.0 X 20mm; Black Phosphate; Set of 18

Installation hardware set for various 1985-92 Camaro models including IROC-Z models. Each set includes 18 of reproduction # 11508023 bolt. Specifications: Quantity: Set of 18 Class: 9.8 Color: Black Phosphate Material: Steel...

Product#: *A19378K

Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set

Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...

Product#: HK107

Ford Fender Bolt Set; 5/16"-18 x 1-1/16 Hex; Yellow Dichromate; 12 Pieces

Set of 12 Yellow Dichromate 5/16"-18 x 1-1/16" hex head sems body bolts with dog point ends. Enough to do the top of the fenders for both sides on 1964-70 Ford Mustang and will fit many other Ford models including Ford Truck....

Product#: A5713

Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating' Each

Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...

Product#: *A5170K

J-Type Clip Nut, Fits 3/8-16 bolts, Black Phosphate Coated, 10 Piece Set

Replacement J-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these...

Product#: *K1554

1955-74 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; 12 Piece Set

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models from 1959-1974. This bolt features a...

Product#: 3079

Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Zinc

This phillips head tapping screw is zinc plated steel to prevent corrosion and has a pan head. It's a size #8 x 1". Screw Size : #8 Length : 1" Head Style : Phillips pan Point Type : A/AB Finish : Zinc Applications: 1972-73...

Product#: 11503834

Hex Head Sems Bolt M6-1.0 X 25 mm Phosphate

Black phosphate hex head Sems metric bolt, that measures M6-1.0 X 25 mm to install and secure various components For Mating Speed Nut, see part# 11503957. Specifications: Class: 9.8 Color: Black Phosphate Material: Steel...

Product#: A16149

#10 x 1/2" Lg Tapping Screw with 5/16" Hex Washer Head; Black Oxide

Product#: A12741

Sheet Metal Screw #8 x 5/8" Hex Head Black

Specialty screw used for many GM sheet metal applications. This black phosphate hex screw is designed for use when installing fenders and other sheet metal components to the body. For general use #8 x 5/8" hex head. Sold...

Product#: FA1705

Hex Head; #8-32 x 3/4"; With Loose 1/2" Washer; Yellow Zinc Plated

Correct hex head bolt used on various GM, Ford and Chrysler vehicles including mounting 1972-73 Ford Mustang grill. This part is original equipment style for multiple applications, and it can be used for a variety of other...

Product#: *A18402K

Window Felt Retainer Clip, Style 1, Round Push In Type, Green Phosphate Coated, 10 Piece Set

Correct replacement window felt retaining clip used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: A15752

Spring Type U-Nut, #10 Screw Size, Black Phospate Coated

Spring Type U-Nut, #10 Screw Size, Black Phospate Coated Specifications: Screw Size : #10 Panel Range : 0.025-0.150" Center of Hole to Edge : 9/16" Finish : Phosphate

Product#: A1021

1979-2002 Universal Retainer Clip; Push-In Style; 1" Diameter Head; 3/4" Stem Length; for 1/2" Hole; Nylon; Black

Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Sold...

Product#: A9825

#14 x 1/2" Lg Tapping Screw with 5/16" Hex Washer Head; Zinc

Product#: *C15316

1985-92 Camaro; Hex Head Sems Bolt Set; M6-1.0 X 30 mm; 10mm Head; 20mm Washer; Black Phosphate; Set of 25

Secure critical components with this installation hardware set designed for 1985-92 Camaro models, including IROC-Z. Each set includes 25 pieces of the reproduction GM 10287379 hex head SEMS bolt, manufactured to factory...

Product#: 10510

Bolt; Hex Head; M6-1.0 X 16mm; DIN 933; Cap Screw; Silver Zinc

Zinc coated hex head DIN 933 Cap Screw metric bolt, that measures M6-1.0 X 16 mm to install and secure various components Specifications: Class: DIN 933 Color: Silver Zinc Material: 8.8 Heat Treated Alloy Steel Specs: M6 -1.0...