Product#: E2194

Edelbrock Performer Manifold, 253-308 Holden

This Edelbrock Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm....

Product#: 20574

Manifold Coolant Stop Leak

1995-2003 GM vehicles with 3.8L series 2 engines (vin K - RPO L36) have been experiencing excessive coolant consumption or coolant leakage near or under the throttle body and intake manifold. This is caused when the EGR tube...

Product#: E27013

1955-86 Sbc Edelbrock Performer EPS Intake Manifold - Black

Edelbrock's Dual Plane Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 RPM when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an...

Product#: E2701

1955-86 Chevrolet 265-400 Small Block without EGR Performer EPS Natural Finish Intake Manifold

The Performer EPS is optimized to deliver superior performance with Edelbrock square-bore Performer Series carburetors on 1986 and earlier small block Chevys. This manifold has a runner design that's tuned for peak power...

Product#: E27011

1955-86 Chevrolet Small Block Edelbrock Performer EPS Non EGR Intake Manifold with Polished Finish

Edelbrock's Dual Plane Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 RPM when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an...

Product#: E75011

Performer RPM Air Gap Manifold; For Small Block Chevy; Non-EGR; Polished Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E27161

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Natural Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: G0105

1987-92 GM Performance Intake Manifold Gaskets 305/350

Why mess with aftermarket intake manifold gaskets while these originals are still available? Fits 1987-92 Chevrolet 305 and 350 small block engines. Use the name you trust.

Product#: E2101

1955-86 Chevrolet Small Block without EGR Edelbrock Performer Natural Finish 4 bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: AK122A

Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Chrome

These reproduction bolts go one step further than the original style. They are produced in polished chrome. Set includes 12 bolts and 12 washers.

Product#: E21011

1955-86 Chevrolet Small Block without EGR Edelbrock Performer Polished Finish 4 bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E3701

1955-86 Chevrolet Small Block with EGR Edelbrock Performer Natural Finish 4bbl Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E71013

1955-86 Chevrolet Small Block without EGR Performer RPM; Square Bore Intake Manifold; Black Finish

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. Has provisions to machine for an oil...

Product#: E26013

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Black

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: E26011

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Polished Aluminum

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: E27163

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Black Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: 154215

1955-1982 Stainless Steel Washer Set; Small Block; for Aluminum Intake Manifolds;12 piece

1956-1982 aluminum intake manifold stainless steel washer set for small block engines. Though not originally so equipped, these special washers are very helpful in protecting the aluminum which is directly in contact with...

Product#: AR13421

Chevrolet 265-400 Small Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: G34401

Chevrolet Performance 25534401 - LS3 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: G34394

Chevrolet Performance 25534394 - LS7 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: G58675

Chevrolet Performance 88958675 - LS1 / LS2 / LS6 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: AR43521

Chevrolet Big Block 396-454 Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR44211

Chevrolet 265-400 Small Block Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43421

Chevrolet 265-400 Small Block Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: E28097

Chevrolet LS1/LS2 Edelbrock Super Victor 4 Barrel Intake Manifold - Natural Finish

Offering greater air flow potential for ever bigger power gains, this manifold has been accepted for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and...

Product#: AR43412

Chevrolet Small Block Vortec Stainless Steel 12 Point Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: E2161CP

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Chrome Plasma

Edelbrock part Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. This version comes with a brilliant Chrome Plasma finish that is durable and...

Product#: E2161BP

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Black Plasma

Edelbrock part Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. This version comes with a beautiful reflective Black Plasma finish that is...

Product#: AR43424

Chevrolet Small Block Tuned Port Injected Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: E7561CP

Edelbrock Performer RPM Air-Gap Intake Manifold; Chevrolet 396-502 Big-Block V8 Oval Port; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap Oval Port intake manifold is designed for high performance 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM...

Product#: 109999

Intake Manifold Heat Plate; GM 6 Cylinder 194/230/250/292

Installing aftermarket exhaust manifolds or headers on 194, 230, 250 & 292 ci 6-cylinder GM engines requires an intake manifold heating system for proper performance. The original intake and exhaust manifolds were connected...

Product#: AR13424

Chevrolet Small Block Tuned Port Injected Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13414

Chevrolet Small Block Tuned Port Injected Black Oxide 12 Pointed Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800160

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: AK122B

Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Stainless Steel

These reproduction bolts go one step further than the original style. They are produced in polished stainless steel. Set includes 12 bolts and 12 washers.

Product#: AR13422

Chevrolet Small Block Vortec Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR34211

Chevrolet 265-400 Small Block Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800161

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: E7562CP

Edelbrock Performer RPM 2-R Intake Manifold; Chevrolet 396-502 Big-Block V8; Chrome Plasma

Edelbrock Performer RPM Air-Gap 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads. The open air space separates the runners from the hot engine oil, and as a...

Product#: E21613

Performer 2-O Manifold for Oval Port Heads; 1965-90 Big-Block Chevrolet 396-502; Black Finish

Product#: TF800159

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: AR13522

Chevrolet 502 Big Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: E7561BP

Edelbrock Performer RPM Air-Gap Intake Manifold; Chevrolet 396-502 Big-Block V8 Oval Port; Black Plasma Finish

Edelbrock Performer RPM Air-Gap Oval Port intake manifold is designed for high performance 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM...

Product#: E7562BP

Edelbrock Performer RPM 2-R Intake Manifold; Chevrolet 396-502 Big-Block V8; Black Plasma

Edelbrock Performer RPM Air-Gap 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads. The open air space separates the runners from the hot engine oil, and as a...

Product#: AR13511

Chevrolet Big Block 396-454 Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800162

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: AR43422

Chevrolet Small Block Vortec Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800158

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: TF800163

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: AR13521

Chevrolet 396-454 Big Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: K0117

1965-90 Chevrolet; Aluminum Intake Manifold Bolt Set; Big Block; with "A" Headmark

Reproduction intake manifold bolt for various 1965-90 Chevrolet big block (396, 402, 427, 454) models. Each bolt is manufactured to correct factory specifications and features the correct "A" head marking for 1965-72 models....

Product#: AR13413

Chevrolet Small Block Vortec Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: 56469CD

1959-86 Chevrolet Small Block Chrome Plated "Bow Tie" Intake Manifold Bolt Set

Add a unique custom touch with a set of these stylish intake manifold bolts. Each chrome plated bolt is emblazoned with the Bow Tie logo.

Product#: 56479SD

Chevrolet Big Block Thru-87 Stainless Steel "Bow Tie" Intake Manifold Bolt Set

Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo.

Product#: 56469SD

1955-1987 Chevrolet "Bow Tie" Intake Manifold Bolt Set; Small Block; Stainless Steel;

Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo. For use with all small block engines from 1955 through 1987. Includes a set...

Product#: E2025

1955-86 Chevy Small Block Edelbrock RPM Dual-Quad Air Gap Natural Finish Intake Manifold/Carb Set

Designed to create the ultimate set-up for the look and performance of dual-quad carbs. RPM Air-Gap manifolds are ideal for street performance from idle to 5500 rpm. Set includes: RPM Air Gap Dual Quad Intake Manifold Two...

Product#: 109998

235 Stovebolt Intake Manifold Heat Plate (Oval Mounting Holes)

Installing aftermarket exhaust manifolds or headers on 235 ci 6-cylinder engines requires an intake manifold heating system for proper performance. The original intake and exhaust manifolds were connected with a heat riser...

Product#: E7164

1965-90 Chevrolet Big Block Oval Port Performer RPM Natural Finish Spread Bore Intake Manifold

Performer RPM manifolds are dual-plane, high-rise intake manifolds with a 180 ° firing order to produce incredible top end horsepower while retaining good throttle response. The larger plenums and runners match...

Product#: AR43414

Chevrolet Small Block Tuned Port Injected Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43511

Chevrolet Big Block 396-454 Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...