Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: D1951

Street Demon; TPS Set

When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal...

Product#: S8520

Barefoot Gas Pedal Pad; Chrome With Black Powder Coated Inlay

Stomp on it in true retro style with this groovy barefoot accelerator pedal cover. This far out pedal cover takes you back to the sixties every time you drive your classic. Chrome cover mounts over your existing accelerator...

Product#: BG6012

Lokar Aluminum Throttle Pedal Assembly; Features 2" x 5" Pedal Pad; Black Anodized Finish with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle pedal assembly, features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: BG6004

Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: SG6007

Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: D1950

Street Demon; Throttle Solenoid Set

Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel Systems includes the solenoid, bracket, and mounting nut....

Product#: GPS6015

Lokar Chrome Steel 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: FM6099

Lokar Eliminator Black Anodized Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: BFG6012

Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: 66180

Chrome Carburetor Return Spring Bracket; Universal

This chrome universal carb return bracket is designed to replace the original bracket for most carburetors. Adds a high performance touch to any carburetor.

Product#: SR4002

Lokar Stainless Steel Throttle Cable Springs

Stainless steel GM designed dual springs for use with Lokars SR4001 bracket (sold separately). Made in USA

Product#: H2088

Holley; Throttle Cable Bracket

This chrome throttle cable bracket can be used with all 4150 and 4160 model square bore Holley carburetors. It includes dual stainless steel return springs.

Product#: K88652

1970-81 Camaro, Firebird, 1970-93 GM Models; Accelerator Pedal Lever Support and Reinforcement Set

Reproduction accelerator pedal lever support and reinforcement for 1970-81 Camaro, Firebird and various other GM models. Manufactured from plastic in two pieces and is the correct support to the firewall for your accelerator...

Product#: DC2083

2 and 4 Bbl Holley Throttle Return Spring Set

Fits Holley 2300 and 2305 2 bbl. or Holley 4150 and 4160 4 bbl. carburetors mounted on any manifold.

Product#: SG6017

Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: GPS6014B

Lokar Black Anodized Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: FM6098

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: BAG6001

Lokar Billet Aluminum Throttle Pedal Assembly; features 1-1/2" x 4" Pedal Pad; Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: BFG6010

Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: SG6016

Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: BAG6004

Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: GPS6016

Lokar Brushed Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: H145212

2011-22 Ford Mustang; Holley Drive by Wire Accelerator Pedal

This Holley DBW accelerator pedal is a perfect compliment to any vehicle using Drive by Wire. Offers plug and play compatibility with Holley EFI and simply bolts in stock locations when used with Holley DBW Pedal Brackets....

Product#: GPS6014

Lokar Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: SR4017

Lokar Throttle Cable Bracket & Spring Set - Big Block 502 - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: D1952

Street Demon; Throttle Rod Adapter; For Mechanical Linkage

This throttle rod adapter removes the guesswork when installing a Street Demon carburetor using mechanical linkage in almost any carbureted GM application. All brackets have a clear zinc coating for corrosion protection and...

Product#: SR4006

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Single Hole - Brushed

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets only fit Holley, Edelbrock, AFB, Quadrajet, Demon, & In-Line...

Product#: SR4009

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Dual Hole - Black

Black Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4011

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 2 Holes - Brushed

Brushed Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4008

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Single Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: SR4012

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: SR4013

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 2 Holes - Black

Black Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4018

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Brushed

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: FM6097

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Ball Milled Finish

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: DBW6200A

Lokar CTS-V Drive-By-Wire Pedal Pad - Brushed w/Rubber Inserts

Billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved pedal pad...

Product#: SR4007

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Dual Hole - Brushed

Brushed Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: DBW6200B

Lokar CTS-V Black Anodized Billet Accelerator Pedal

Direct-fit billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved...

Product#: 368077

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Tension Spring; Various Car and Truck Models

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

Product#: GPS6016B

Lokar Black Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

Reproduction accelerator pedal for 1968-2004 GM vehicles. Manufactured in injection molded ABS, this pedal replicates the original in fit and design to help restore a factory-correct, period-correct pedal appearance. Features...

Product#: D1953

Street Demon; Throttle/Transmission Kickdown Cable Bracket Set

This throttle and transmission kickdown cable bracket set removes the guesswork when installing a Street Demon carburetor in almost any carbureted GM application. All brackets have a clear zinc coating for corrosion...

Product#: TF801171

1994 & Later LT1/LT4 - Black Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: TF801166

Lokar Throttle Cable Bracket - 1985-91 TPI Engines - Triple Hole - Black Finish

This billet aluminum cable bracket from Lokar mounts to the side of your TPI intake plenum and allow you to install your throttle cable. Made in USA Black billet aluminum. Triple hole stud for throttle, kickdown, and cruise...

Product#: TF801167

1992-93 LT1 Lokar Stainless Steel Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: TF801170

1992-93 LT1 - Black Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: SR4015

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: SR4014

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: TF801168

1994 & Later LT1/LT4 Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: TF801165

1985-91 TPI Engine Lokar Throttle Cable Bracket - Double Hole - Black Finish

This billet aluminum cable bracket from Lokar mounts to the side of your TPI intake plenum and allow you to install your throttle cable. Made in USA Black billet aluminum. Double hole stud for throttle and ickdown cable only.

Product#: SR4016

Lokar Throttle Cable Bracket & Spring Set - Big Block 502 - Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: TF801164

1985-91 TPI Engines Lokar Throttle Cable Bracket - Single Hole - Black Finish

This billet aluminum cable bracket from Lokar mounts to the side of your TPI intake plenum and allow you to install your throttle cable. Made in USA Black billet aluminum. Single hole stud for throttle cable only.

Product#: T2387

Chevrolet Small Block with Carburetor Spacer Throttle Spring Return Set

Required by many race sanctioning bodies and a great idea for any high performance car, this intake manifold mounted throttle return spring and bracket set provides positive throttle return. Mounts to intake manifold on...

Product#: TF800161

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: 368078

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Mounting Pin; Various Car & Truck Models

This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...

Product#: 468234

1974-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Accelerator Pedal Pad

Reproduction accelerator pedal pad for 1974-86 C/K and 1987-91 R/V Chevrolet and GMC models. Manufactured in injection molded ABS to replicate the original in fit and design, this pad helps restore a factory-correct,...

Product#: TF800160

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: TF800159

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: T2386

Chevrolet Big Block Throttle Spring Return Set

Required by many race sanctioning bodies and a great idea for any high performance car, this intake manifold mounted throttle return spring and bracket set provides positive throttle return. Mounts to intake manifold on...

Product#: TF801169

1992 and Later LT1 Lokar Stainless Steel Cruise Control Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...