Product#: E2194

Edelbrock Performer Manifold, 253-308 Holden

This Edelbrock Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm....

Product#: OF6227C

1965-96 Ford Straight-6; 240-300 cid; Offenhauser C Series Intake Manifold; Single-Quad; Square Bore, 4-Barrel

Offenhauser C Series intake manifold for Ford 240-300 cid striaght-6 engines. C Series intake manifolds fill the gap between stock and competition setups for 6-cylinder pickups. They improve torque in the mid and upper...

Product#: 20574

Manifold Coolant Stop Leak

1995-2003 GM vehicles with 3.8L series 2 engines (vin K - RPO L36) have been experiencing excessive coolant consumption or coolant leakage near or under the throttle body and intake manifold. This is caused when the EGR tube...

Product#: OF6019DP

1965-96 Ford Straight-6; 240-300 cid; Offenhauser Dual Port 360 Degree Intake Manifold; Square Bore, 4-Barrel

Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller...

Product#: EDL7581

Edelbrock RPM Air Gap 351W Non-EGR 1500-6500 RPM Intake Manifold with Satin Finish

The Edelbrock Part RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that's been used on our...

Product#: EDL2121

Edelbrock 0-5500 RPM Performer 289 Intake Manifold for Small-Block Ford 289/302 with Satin Finish

The Edelbrock Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Edelbrock Performer manifolds are dual plane, low rise intake manifolds with a patented runner design that you won't...

Product#: E7521CP

Edelbrock Performer RPM Air-Gap Intake Manifold; 289, 302, 347 Small-Block Ford; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is designed for Small-Block Ford 289-302 CID based V8's including 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that's been used on...

Product#: E7581BP

Edelbrock Performer Intake Manifold; 351W Small-Block Ford V8; Idle to 5500 RPM; Black Plasma Finish

Edelbrock Performer RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that's been used on our...

Product#: EDL7521

Edelbrock RPM Air Gap 302 1500-6500 RPM Intake Manifold with Satin Finish

This Edelbrock RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8 applications. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition...

Product#: AFR4830

AFR Renegade SBF Single Plane Aluminum 4150 Intake Manifold 8.2 Deck

Cast and machined in the USA

Product#: E7121CP

Edelbrock Performer RPM Intake Manifold; 289-302 Small-Block Ford V8; Idle to 5500 RPM; Chrome Plasma Finish

Edelbrock part #7121-CP Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for...

Product#: E2121CP

Edelbrock Performer Intake Manifold; 289-302 Small-Block Ford V8; Idle to 5500 RPM; Chrome Plasma Finish

Edelbrock Performer intake manifold is designed for street Small-Block Ford 260-289-302 CID V8's without EGR. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide...

Product#: E2121BP

Edelbrock Performer Intake Manifold; 289-302 Small-Block Ford V8; Idle to 5500 RPM; Black Plasma Finish

Edelbrock Performer intake manifold is designed for street Small-Block Ford 260-289-302 CID V8's without EGR. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide...

Product#: E7521BP

Edelbrock Performer RPM Air-Gap Intake Manifold; 289, 302, 347 Small-Block Ford; Black Plasma Finish

Edelbrock Performer RPM Air-Gap intake manifold is designed for Small-Block Ford 289-302 CID based V8's including 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that's been used on...

Product#: 19013A

1962-96 Ford; 289/302; Intake Manifold Dress-Up Bolt Set; Allen Head; 12 Pieces

Engine dress-up bolts for 289/302 Ford engines. Choose our intake manifold sets for an allen head bolt that provides for a sleek custom look under the hood.

Product#: EDL7121

Edelbrock Performer RPM 302 1500-5500 RPM Non-EGR Intake Manifold with Satin Finish

Edelbrock Performer RPM manifolds are designed for street 289-302 Ford V8 engines. This dual-plane high rise intake manifold has excellent high rpm power while retaining throttle response. Made in USA No provisions for...

Product#: EDL21211

Edelbrock 0-5500 RPM Performer 289 Intake Manifold for Small-Block Ford 289/302 with Polished Finish

The Edelbrock Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Edelbrock Performer manifolds are dual plane, low rise intake manifolds with a patented runner design that you won't...

Product#: EDL21213

Edelbrock 0-5500 RPM Performer 289 Intake Manifold for Small-Block Ford 289/302 with Black Finish

The Edelbrock Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Edelbrock Performer manifolds are dual plane, low rise intake manifolds with a patented runner design that you won't...

Product#: EDL75213

Edelbrock RPM Air Gap 302 1500-6500 RPM Intake Manifold with Black Finish

This Edelbrock RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8 applications. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition...

Product#: EDL3721

Edelbrock Idle-5500 RPM with EGR Valve Performer 302 4V Intake Manifold with Satin Finish

The Edelbrock Performer 302 4V manifold is a dual plane, low rise intake manifold with a patented runner design that you won't find on other brands. This patented design greatly improves throttle response and torque over a...

Product#: E7581CP

Edelbrock Performer Intake Manifold; 351W Small-Block Ford V8; Idle to 5500 RPM; Chrome Plasma Finish

Edelbrock Performer RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that's been used on our...

Product#: EDL7585

Edelbrock RPM Air Gap Dual-Quad 1500-6500 RPM Intake Manifold with Satin Finish

The Edelbrock RPM Air-Gap Dual-Quad 351W intake manifold is designed for 351W small-block Fords. This intake offers performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that...

Product#: EDL75811

Edelbrock RPM Air Gap 351W Non-EGR 1500-6500 RPM Intake Manifold with Polished Finish

The Edelbrock Part RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that's been used on our...