Product#: 66942R

1974-87 Proform HEI Distributor Coil Cap and Rotor Set with Red Cap and 50,000 Volt Coil

50,000 Volt coil and premium hi-dielectric cap with brass terminals, and premium rotor.

Product#: PX40011

Pertronix Flame Thrower 8-Cylinder 40,000 Volt 1.5 Ohm Black Oil Filled Ignition Coil

Complete your ignition upgrade with a Flame Thrower high performance ignition coil! The Flame Thrower coil fits into your existing coil bracket for a clean, factory look. Enables larger plug gaps for greater fuel efficiency...

Product#: 8145

Accel; 1955-74; Yellow; 45,000 Volt; Superstock Breakerless Electronic Ignition Coil

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability.

Product#: H556152

Holley; Sniper; HyperSpark Ignition Coil

Sniper EFI HyperSpark ignition coil from Holley. This coil features an innovative connector and integrated bracket for a secure connection and simplified mounting. Its powerful 135mj of spark ensure complete combustion and...

Product#: PX40111

PerTronix Flame Thrower 8 Cylinder 40,000 Volt 1.5 Ohm Black Epoxy Filled Ignition Coil

Complete your ignition upgrade with a Flame Thrower high performance ignition coil! The Flame Thrower coil fits into your existing coil bracket for a clean, factory look. Enables larger plug gaps for greater fuel efficiency...

Product#: 8140C

Accel; 1955-74; Chrome; 42,000 Volt; 1.4 Ohm Primary; Superstock Ignition Coil; Points

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability. Fits 1955-74 with breaker point ignition

Product#: PX44001

Pertronix Flame Thrower III 8 Cylinder 45,000 Volt 0.32 Ohm Chrome Oil Filled Ignition Coil

The Flame Thrower III Coil is a rapid charge ignition coil to optimize the Ignitor III module. The Flame Thrower III is a traditional oiled filled canister for the "old school" appearance; but will work with modern day...

Product#: A7700200

E-Core Remote Ignition Coil; Red

The TSP power coil is capable of delivering a longer and hotter spark with up to 70% more spark energy than stock ignition coils. Its convenient design easily mounts to fire walls, core supports and fender wells. It features...

Product#: 8140

Accel; 1955-74; Yellow; 42,000 Volt; 1.4 Ohm Primary; Superstock Ignition Coil; Points

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability.

Product#: PX45011

Pertronix Flame Thrower II 4 -6 - 8 Cylinder 45,000 Volt 0.6 Ohm Black Oil Filled Ignition Coil

Complete your ignition upgrade with a Flame Thrower II high performance ignition coil! The Flame Thrower coil fits into your existing coil bracket for a clean, factory look. Enables larger plug gaps for greater fuel...

Product#: PX40001

Pertronix Flame Thrower 8 Cylinder 40,000 Volt 1.5 Ohm Chrome Oil Filled Ignition Coil

Complete your ignition upgrade with a Flame Thrower high performance ignition coil! The Flame Thrower coil fits into your existing coil bracket for a clean, factory look. Enables larger plug gaps for greater fuel efficiency...

Product#: A7700202

E-Core Remote Ignition Coil; Black

The TSP power coil is capable of delivering a longer and hotter spark with up to 70% more spark energy than stock ignition coils. Its convenient design easily mounts to fire walls, core supports and fender wells. It features...

Product#: 8145C

Accel; 1955-74; Chrome; 45,000 Volt; Superstock Breakerless Electronic Ignition Coil

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability.

Product#: 75643

MSD; Stand Alone Solid State Relay Kit; 4 Channel; Black

Clean up your wiring with an MSD Solid State Relay Block. This module takes the place of 4 standard relays and eliminates unsightly wiring. 4 independent channels can be activated using either power or ground. Each channel is...

Product#: 140001

Accel; 1955-74; 45,000 Volt; Super Coil; Ignition Coil

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability.

Product#: 8253

MSD; Blaster HVC II Ignition Coil; Blue

The latest coil to be built entirely in house at MSD is designed to be used with MSD 6 and SCI Series Ignition Controls. This coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The...

Product#: PX45001

Pertronix Flame Thrower II 4 -6 - 8 Cylinder 45,000 Volt 0.6 Ohm Chrome Oil Filled Ignition Coil

Complete your ignition upgrade with a Flame Thrower II high performance ignition coil! The Flame Thrower coil fits into your existing coil bracket for a clean, factory look. Enables larger plug gaps for greater fuel...

Product#: 77303

MSD; Power Grid System; Controller Only; Black

The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB...

Product#: 7740

MSD; Power Grid CAN-Bus 4-Hub Connector; Red

This hub allows you to expand the Power Grid system with up to four accessory modules.Note: This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.

Product#: 7720

MSD; Power Grid 7; Ignition Control Only

The Power Grid Ignition Control has been specially designed to mount to the Power Grid System Controller box, part #7730/77303. This Ignition output only controller packs higher output than the current programmable...

Product#: 8252

MSD; Blaster HVC Ignition Coil; Blue; Universal

Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap, but lowers the amount of current, or heat, that follows across the plug gap. When...

Product#: 8732

MSD; Digital 2-Step Rev Control; For Digital 6AL

This 2-Step Rev Control could be added to give you the ability to switch to a low rpm limit to use on the starting line. Features two easy to read rotary dials that let you set the launch rpm in 100 rpm increments. There is...

Product#: 840221

MSD; Ignition Coil Cover; Extreme Output; Internal Coil

Product#: A7700201

E-Core Remote Ignition Coil; Blue

The TSP power coil is capable of delivering a longer and hotter spark with up to 70% more spark energy than stock ignition coils. Its convenient design easily mounts to fire walls, core supports and fender wells. It features...

Product#: 8250

MSD; 6 HVC Ignition Coil

Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap, but lowers the amount of current, or heat, that follows across the plug gap. When...

Product#: 7730

MSD; Power Grid System; Controller Only; Red

The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB...

Product#: 241190-BBVL

Holley LS Coil Covers; Pontiac Style Valve Covers; For LS Engine Conversion; 241-190

Holley's 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height,...

Product#: 241192-BBVL

Holley LS Coil Covers; Pontiac Style Valve Covers; For LS Engine Conversion; Satin Black; 241-192

Holley's 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height,...

Product#: 77403

MSD; Power Grid CAN-Bus 4-Hub Connector; Black

This hub allows you to expand the Power Grid system with up to four accessory modules.Note: This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.

Product#: 7564

MSD; Stand Alone Solid State Relay Kit; 4 Channel; Red

Clean up your wiring with an MSD Solid State Relay Block. This module takes the place of 4 standard relays and eliminates unsightly wiring. 4 independent channels can be activated using either power or ground. Each channel is...

Product#: 66120

Chrome Coil Cover

Dress your engine with this all chrome coil cover. Fits most early model coils. Includes cover and attaching bracket. For use with small block engines.

Product#: PD0651

DUI/HEI V8 Magnetic Pick Up Coil

Davis Unified Ignition's distributor ignition pickups offer the quality, reliability, and durability you need. The trigger for your ignition system needs to be optimal for the best engine performance. Each distributor...

Product#: 86415

MSD; 6EFI; Ignition Coil; For Part # 6415

When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance...

Product#: 84039

MSD; 18"; Red; Super Conductor 8.5MM Coil Wire; With 90° Treminals

If you're changing a coil or cap to a new design, you could find yourself searching for different terminals for the coil wire. MSD offers this 18" long, 90° male coil terminals and boots are installed on both sides to...

Product#: 84033

MSD; 18"; Black; Super Conductor 8.5MM Coil Wire; With 90° Terminals

If you're changing a coil or cap to a new design, you could find yourself searching for different terminals for the coil wire. MSD offers this 18" long, 90° male coil terminals and boots are installed on both sides to...

Product#: 84049

MSD; 18"; Red; Super Conductor 8.5MM Coil Wire; With Straight Treminal

If you're changing a coil or cap to a new design, you could find yourself searching for different terminals for the coil wire. MSD offers this 18" long, straight female socket coil terminal and boot on one side with a...

Product#: 8207

MSD; Blaster SS; 40,000 Volt Ignition Coil; Red

Don't let the compact size of the Blaster SS Coil fool you because it is packed with performance. The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact,...

Product#: 8202

MSD; Blaster 2 Series; 45,000 Volt Ignition Coil; Red

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 5, 6 and 7 Series Ignition, the Blaster Coil is the right choice. The Blaster 2 Coil shares the same special windings and high...

Product#: PD0078

Inferno Ignition Coils; Electronic Ignitions (Excludes DUI/HEI and Points)

Add some serious firepower to your ignition system with the Inferno coil! The Inferno and Inferno 2 Coils were designed to outperform all stock and other aftermarket coils. Both Inferno Coils are universal and will work with...

Product#: PD0077

Inferno Ignition Coils; Electronic Ignitions (Excludes DUI/HEI and Points)

Add some serious firepower to your ignition system with the Inferno coil! The Inferno and Inferno 2 Coils were designed to outperform all stock and other aftermarket coils. Both Inferno Coils are universal and will work with...

Product#: A5700219

OTB Gear Aluminum Finned Coil Cover - Polished Finish

Vintage style finned coil cover for your classic. Mounts with 1/4"-20 drive studs. Cast in aircraft grade A356 aluminum and polished to a high sheen.

Product#: 8223

MSD; Blaster 3 Series; 45,000 Volt Ignition Coil; Extra Tall Tower; Red

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 5, 6 and 7 Series Ignition, our Blaster Coils are the right choice. The Blaster 3 Coil shares the same special windings and high...

Product#: PD0015

V8 and 4 Cylinder Square Top HEI/DUI Coil Cover

V8 and 4 Cylinder Square Top HEI/DUI Coil Cover.

Product#: PD0016

V8 and 4 Cylinder Round Top (Stock Style) HEI/DUI Coil Cover

V8 and 4 Cylinder Round (Stock) Top HEI/DUI Coil Cover.

Product#: 9201001-DKHD

Walker Products; ThunderSpark Ignition Coil 920-1001; Standard Ignition

ThunderSpark Ignition Coils are precision made for superior performance and manufactured to meet or exceed all original equipment specifications. A full service kit contains not only the base sensor but also provides the...

Product#: G19981

Ignition Coil - LS3

OEM ignition coil for LS3 V8. 8 required per vehicle.

Product#: PD0652

DUI/HEI; Inline 6 and V6; Magnetic Pick Up Coil

Davis Unified Ignition's distributor ignition pickups offer the quality, reliability, and durability you need. The trigger for your ignition system needs to be optimal for the best engine performance. Each distributor...

Product#: 140013

Accel; 1974-87; 48,000 Volt; HEI In-Cap Super Coil; Red And Yellow Wires

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability.

Product#: 9201003-DKHD

Walker Products; ThunderSpark Ignition Coil 920-1003; HEI Ignition

ThunderSpark Ignition Coils are precision made for superior performance and manufactured to meet or exceed all original equipment specifications. A full service kit contains not only the base sensor but also provides the...

Product#: 140003

Accel; 1974-87; 45,000 Volt; HEI In-Cap Super Coil; Red And Yellow Wires

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability.

Product#: 35361

Accel; 1974-87; 4-Prong Ignition Control Module; For Factory GM Distributor

If your vehicle is equipped with a V8 engine with a GM factory distributor, upgrade to Accel components during your next tune-up. You'll enjoy increased performance, longer life and maximum dependability.

Product#: G19980

Ignition Coil - LS1

OEM ignition coil for LS1 V8. 8 required per vehicle.

Product#: 140011

Accel; 1984-95; 48,000 Volt; HEI Remote Super Coil

This HEI remote mount Super Coil is engineered with optimized low resistance, high turns ratio windings around a M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts,...

Product#: 5526

MSD; Street Fire Coil

Street Fire Ignition Coil offers entry level spark output for your GM dual connector ignition. Mounts directly in place of the factory coil and accepts the factory connectors. Spark energy is increased thanks to improved...

Product#: 9201004-DKHD

Walker Products; ThunderSpark Ignition Coil 920-1004; HEI Ignition

ThunderSpark Ignition Coils are precision made for superior performance and manufactured to meet or exceed all original equipment specifications. A full service kit contains not only the base sensor but also provides the...

Product#: 8129

Accel; HEI Ignition Cap & Rotor Set

Distributor Cap & Rotor Set For over 30 years, ACCEL has been manufacturing distributor caps, rotors, points and condensers for racing applications world-wide. As a direct result of this racing involvement, ACCEL engineers...

Product#: 66942BK

1974-87 Proform HEI Distributor Coil Cap and Rotor Set with Black Cap and 50,000 Volt Coil

50,000 Volt coil and premium hi-dielectric cap with brass terminals, and premium rotor.

Product#: 66942B

1974-87 Proform HEI Distributor Coil Cap and Rotor Set with Blue Cap and 50,000 Volt Coil

50,000 Volt coil and premium hi-dielectric cap with brass terminals, and premium rotor.

Product#: PX3001

1977-91 GM HEI In-Cap Mounted Pertronix Flame-Thrower Coil with Black, White and Red Wires

This Pertronix Flame Thrower 50,000 volt E-Core coil features an optimized winding design to maximize spark gap current and available voltage. Includes all necessary hardware. When teamed with a Flame Thrower module (sold...

Product#: PX3000

1974-88 GM HEI In-Cap Mounted Pertronix Flame-Thrower Coil with Black, Yellow and Red Wires

This Pertronix Flame Thrower 50,000 volt E-Core coil features an optimized winding design to maximize spark gap current and available voltage. Includes all necessary hardware. When teamed with a Flame Thrower module (sold...