Product#: CHARKIT

Charcoal Refill Kit for Vapor Trapper Canister

Maintain peak performance of your Vapor Trapper with their proprietary Charcoal Refill Kit. The same high-efficiency media used in every Vapor Trapper unit. Formulated for a dense, secure pack, this specialized blend is...

Product#: VT6S38

Vapor Trapper; 6" Silver Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT6B38

Vapor Trapper; 6" Black Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT6S14

Vapor Trapper; 6" Silver Charcoal Canister; 1/4" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: 12562568

1966-2001 Buick, Chevy, Pontiac, Olds; Smog Pump Check Valve: with 3/4" OD Hose

Reproduction smog pump check valve for various 1966-2001 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. This reproduction is designed to replace the existing valve and features an original black finish...

Product#: 60406

Painless Oxygen Sensor Bung Fitting

Direct weld-in oxygen sensor fitting for all fuel injection systems. Fits TBI, TPI, CMFI, LT1, LSX, 5.0L and most other oxygen sensors.

Product#: VT6B14

Vapor Trapper; 6" Black Charcoal Canister; 1/4" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: G9110

A.I.R. And EGR Vacuum Hose; 5/32" ID; 2 Foot Length

Original A.I.R. or EGR vacuum hose which can be purchased in a 2 foot length. The dimensions are 5/32 I.D. hose x 24 inches.

Product#: VT8B38

Vapor Trapper; 8" Black Charcoal Canister; 3/8" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT8B14

Vapor Trapper; 8" Black Charcoal Canister; 1/4" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT8S38

Vapor Trapper; 8" Silver Charcoal Canister; 3/8" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: BC25B2

Vapor Trapper Billet Clamp Set; Black; 2 pack

Secure your Vapor Trapper with confidence using precision-engineered Black anodized 2.5-inch Billet Clamps. Crafted from high-quality billet aluminum, these clamps provide a solid, reliable hold for long-term stability. We...

Product#: VT8S14

Vapor Trapper; 8" Silver Charcoal Canister; 1/4" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: BC252

Vapor Trapper Billet Clamp Set; Silver; 2 pack

Secure your Vapor Trapper with confidence using precision-engineered Silver anodized 2.5-inch Billet Clamps. Crafted from high-quality billet aluminum, these clamps provide a solid, reliable hold for long-term stability. We...

Product#: 32207

1980-86 V6 / V8 Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: SPE9774

Spectre 9774; Performance Mass Air Flow Couplers

This kit comes with one 3.625 in. to 4.000 in. and two 3.875 in. to 4.000 in. reducers. It adapts most boot-in style GM mass airflow sensors to a 4.000 in. intake system.

Product#: 09033

K&N; Neoprene Gasket for Mass Air Flow

Mass air flow gasket for GM Vehicles. K & N part # 09033

Product#: G4751

1982-98 GM Models; Oxygen Sensor

This often overlooked item is a very important component in your late model Firebird. Controlling both the fuel and ignition systems, a bad oxygen sensor can lead to problems such as poor fuel economy, increased emissions,...

Product#: 32220

1981-86 General Motors, 1987 Dodge Truck Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resultingi n...

Product#: GN110537

1978-87 Buick Regal - Heated 4 Wire O2 Sensor

Four wire heated O2 sensor. High tolerance to impurities and additives in the fuel system, last considerably longer than non-heated sensors. Also more tolerant to lead poisoning, and gets your car into closed loop quicker.

Product#: GN110291

1986-87 Buick Turbo Mass Air Flow Duct

Reproduction mass air flow duct for 1986-87 turbo models. Manufactured out of black thermoplastic rubber, reinforced with a wire helix. Also features a thicker wall than the original for increased resistance to punctures and...

Product#: GN110298

1986-87 Buick Grand National MAF Translator Bracket

MAF translator bracket for 1986-87 Grand National models. This bracket bolts up to the driver side fender where it meets the core support. Made from plastic.

Product#: GN110538

1978-87 Buick Regal - O2 Retrofit Sensor Connector

O2 sensor connector for various applications. This plug-in adapter is used when installing a heated oxygen sensor into a retrofit application where a one wire sensor was originally used. Plugs into the 3 wire connector on the...

Product#: GN110544

1978-87 Buick Regal - 3 Wire to 4 Wire O2 Sensor Adaptor

Mates with heated O2 harness to allow use of AFS74 or similar GM 3-wire sensor. The adapter plugs in to the sensor connector, and also to the male connector common to early GM heated 3-wire sensors.

Product#: 17111570

1984-88 Skylark, 98, , Grand Am; Valve; EGR; Each

Replacement EGR valve for use on various 1984-89 GM applications which include 1986-87 Buick Regal Grand National, 1985-86 Oldsmobile 98 and 1985-87 Grand Am. See vehicle fitment for all applicaitons. Sold individually.

Product#: GN110534

1986-87 Buick Regal - EGR Solenoid Connector

EGR solenoid connector for 1986-89 models. This connector is found at the rear of the drivers side intake, plugged into the EGR solenoid valve. Four wire metri-pack connector.

Product#: GN110539

1986-87 Buick Regal - O2 Sensor Harness

Plug and play harness installs with no wires to cut or splice. Harness plugs into the 1984-87 turbo Buick engines and provides perfect electrical connection to a 4 wire heated sensor. It allows for quicker closed loop entry...

Product#: GN110541

1986-89 Buick Regal - O2 Sensor with Wiring Harness

Plug and play harness installs with no wires to cut or splice. Harness plugs into the 1986-87 turbo Buick engines and provides perfect electrical connection to a 4 wire heated sensor. It allows for quicker closed loop entry...

Product#: GN110542

1984-87 Buick Regal - O2 Sensor Connector (Harness Side)

Oxygen sensor pigtail/connector for sensor and harness side splice for 1984-87 G-Body models.

Product#: GN110543

1984-87 Buick Regal - O2 Sensor Connector (Sensor Side)

Oxygen sensor pigtail/connector for sensor and harness side splice for 1984-87 G-Body models.

Product#: 14047619

1986-87 Buick Grand National, Regal GNX; Vacuum Check Valve; One Way

Replacement one way vacuum check valve for use on 1986-87 Buick Regal, Grand National, GNX models. This valve is used in the ERG system, air conditioning system and the fuel injection system. Sold individually.

Product#: GN110810

1986-87 Buick Regal - Aluminum EGR Block Off Plate - Silver with Turbo 6 Logo

Aluminum EGR block off plates with Turbo 6 logo. Available in silver and black anodized finish. Includes block off plate and stainless steel button head mounting bolt.

Product#: GN110811

1986-87 Buick Regal - Aluminum EGR Block Off Plate - Black with Turbo 6 Logo

Aluminum EGR block off plates with Turbo 6 logo. Available in silver and black anodized finish. Includes block off plate and stainless steel button head mounting bolt.