Product#: E2194

Edelbrock Performer Manifold, 253-308 Holden

This Edelbrock Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm....

Product#: 20574

Manifold Coolant Stop Leak

1995-2003 GM vehicles with 3.8L series 2 engines (vin K - RPO L36) have been experiencing excessive coolant consumption or coolant leakage near or under the throttle body and intake manifold. This is caused when the EGR tube...

Product#: E27161

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Natural Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: G34401

Chevrolet Performance 25534401 - LS3 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: G34394

Chevrolet Performance 25534394 - LS7 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: G58675

Chevrolet Performance 88958675 - LS1 / LS2 / LS6 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: AR13421

Chevrolet 265-400 Small Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: G0105

1987-92 GM Performance Intake Manifold Gaskets 305/350

Why mess with aftermarket intake manifold gaskets while these originals are still available? Fits 1987-92 Chevrolet 305 and 350 small block engines. Use the name you trust.

Product#: AR43521

Chevrolet Big Block 396-454 Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR44211

Chevrolet 265-400 Small Block Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: E28097

Chevrolet LS1/LS2 Edelbrock Super Victor 4 Barrel Intake Manifold - Natural Finish

Offering greater air flow potential for ever bigger power gains, this manifold has been accepted for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and...

Product#: AR43421

Chevrolet 265-400 Small Block Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43412

Chevrolet Small Block Vortec Stainless Steel 12 Point Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43424

Chevrolet Small Block Tuned Port Injected Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13424

Chevrolet Small Block Tuned Port Injected Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13414

Chevrolet Small Block Tuned Port Injected Black Oxide 12 Pointed Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800160

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: AR13422

Chevrolet Small Block Vortec Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800161

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: AR34211

Chevrolet 265-400 Small Block Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800159

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: AR13522

Chevrolet 502 Big Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13511

Chevrolet Big Block 396-454 Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800158

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: TF800162

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: AR43422

Chevrolet Small Block Vortec Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: TF800163

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: AR13521

Chevrolet 396-454 Big Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13413

Chevrolet Small Block Vortec Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: 109998

235 Stovebolt Intake Manifold Heat Plate (Oval Mounting Holes)

Installing aftermarket exhaust manifolds or headers on 235 ci 6-cylinder engines requires an intake manifold heating system for proper performance. The original intake and exhaust manifolds were connected with a heat riser...

Product#: 56479SD

Chevrolet Big Block Thru-87 Stainless Steel "Bow Tie" Intake Manifold Bolt Set

Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo.

Product#: AR43414

Chevrolet Small Block Tuned Port Injected Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: E71187

1997-02 Chevrolet LS1 Edelbrock Performer RPM Intake Manifold (Non EGR)

Looking to install a carburetor on an 1997-02 LS1? Edelbrock has you covered. This is a performer RPM 4 barrel non-EGR manifold. Note: 600-800 cfm carburetor recommended. Not legal for pollution controlled vehicle s.

Product#: AR43511

Chevrolet Big Block 396-454 Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: 56469CD

1959-86 Chevrolet Small Block Chrome Plated "Bow Tie" Intake Manifold Bolt Set

Add a unique custom touch with a set of these stylish intake manifold bolts. Each chrome plated bolt is emblazoned with the Bow Tie logo.

Product#: 56469SD

1955-1987 Chevrolet "Bow Tie" Intake Manifold Bolt Set; Small Block; Stainless Steel;

Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo. For use with all small block engines from 1955 through 1987. Includes a set...

Product#: E7118

1997-02 Chevrolet LS1 Edelbrock Performer RPM Intake Manifold Set

Looking to install a carburetor on an 1997-02 LS1? Edelbrock has you covered. This performer RPM manifold set comes with the major components needed to install a 600-800 cfm carburetor on a modern LS1, LS6, LM7, LR4 and LQ4,...

Product#: E7516

1996-Up Chevy Small Block Iron; Vortec Heads; Performer RPM Air Gap Intake Manifold; Natural Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E7116

1996-Up Chevy Small Block w/Iron Vortec Heads w/o EGR Performer RPM Natural Finish Intake Manifold

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. The larger plenums and runners match...

Product#: E2116

1996-Up Chevrolet Small Block with Iron Vortec Heads Natural Finish Performer Intake Manifold

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E21163

1996-Up Chevrolet Small Block with Iron Vortec Heads Performer Intake Manifold; Black Finish

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find on other brands. This patented design greatly improves torque over a wide RPM range,...

Product#: E8516

1996-2003 GM/GMC Small Block Intake Manifold Bolt Kit

This Edelbrock intake manifold bolt kit is designed specifically for small-block Chevy V8s with E-tec or Vortec heads when using an Edelbrock manifold. This bolt kit features 12-point heads for easy wrench access. Features...