Product#: K51499

1958-69 Trunk Spatter Paint; Black / Aqua; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51496

1970-1982 GM: Trunk Spatter Paint; Black / Gray; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51498

Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: DE010416

DEI Cool Tape Thermal Insulating Tape 1 1/2" x 30 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: K51497

Trunk Spatter Paint Clear Topcoat; 16 Oz Aerosol Can; Net Wt. 16 Oz.

After years of use your trunk area is probably in poor condition due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. This is the...

Product#: DE010408

DEI Cool Tape Thermal Insulating Tape 1 1/2" x 15 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: DE010468

DEI Cool Tape Thermal Insulating Tape 2" x 30 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: 9781957

1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-3/4", Large

Correct reproduction rubber lug wrench sleeve for the tirejack and wrench assembly. This special rubber storage sleeve was found originally on many GM car models. Manufactured from quality rubber material, this sleeve slides...

Product#: *K51491

OER Black and Aqua Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51494

OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51492

OER Gray and White Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51490

OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...

Product#: B10891

1/4-20 x 5/8 Hex Head SEMS Machine Screw,.750 Toothed Washer

Reproduction of the original 1/4-20 x 5/8 hex head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...

Product#: *K51495

OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51493

OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: GN110672

1985 GM Door and Trunk Key Blank "H" Code

Un-cut replacement key for the indicated code listed for 1985 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct letter code.

Product#: 1400001

1967-69 Camaro/Firebird; 1959-72 Impala; 1962-74 Nova; 1964-72 Chevelle; and Other GM; Remote Power Trunk Release System

The Klassic Keyless system is a complete do-it-yourself kit designed specifically to fit your vehicle. In this power trunk release kit you will receive: 1 power trunk latch, 1 manual push button, wire and wire loom, full...

Product#: K1088

1967-81 Camaro, Firebird; Jack Handle; Lug Nut Wrench; 3/4"

Reproduction of the original lug nut wrench and jack handle designed for use with 1967-81 Camaro and Firebird models with 3/4" hex head lug nuts. This handle is also used to operate the tire jack. Manufactured in quality...

Product#: TR1200

Lokar Trunk Release Cable Set Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: TR1200B

Lokar Trunk Release Cable Set Black Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: CHT1300

Lokar Hood/Trunk Release Cable Set Stainless Steel

Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire. Hood...

Product#: UTC1415CF

Universal Spare Tire Cover 14" / 15" Crowsfeet Pattern Design; Gray / Black

Reproduction style spare tire cover for use with all 1960s, and 1970s GM models that included a 14" or 15" spare tire. This universal style spare tire cover is manufactured in a gray and black Crowsfoot design pattern that...

Product#: TB4

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; Black

Beautifully designed, hand-crafted black vinyl tote bag to stylishly store almost anything you need to keep in the trunk area. Constructed from durable black vinyl material, the use of this handy bag is a great way to clean...

Product#: FB1000

1" Foam Paint Brush

Product#: 4753019

1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models

This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...

Product#: 9728247

1962-91 Buick, Chevy, GMC, Pontiac, Oldsmobile; Door Lock Cylinder Retainer; Each; Various Car & Truck Models

Reproduction of the original type lock cylinder retainer required on various 1962-91 GM models. If you're replacing your lock cylinder, it will probably be necessary to replace the cylinder retainer. Manufactured in spring...

Product#: TK112

1958-94 GM Trunk Lock Cylinder with Late Style Key

Replace your trunk lock cylinder with this correct replacement. Each cylinder includes 2 pre-cut keys, gasket, retainer and shaft for easy and fast installation. Applications: 1967 Camaro 1st design models (see important note...

Product#: 153852

1970-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lock Striker; Various Models

Reproduction of the original trunk lid catch for various 1970-81 GM models including 1970-81 Camaro and Firebird models. Manufactured in stamped steel to the original configuration and features correct mounting points and...

Product#: 152928

1964-70 Chevelle, Nova, 1962-70 Impala, GM Full Size; Trunk Latch Striker/Catch; Black EDP Coated

Reproduction trunk latch striker/catch for all 1966-70 Chevy II/Nova, and 1962-70 Impala, Bel Air, Biscayne, Caprice and various 1964-72 GM A-body models. Each striker is manufactured in quality stamped steel to factory...

Product#: 9785616

1955-81 Buick, Cadillac,Chevy, Pontiac, Oldsmobile; Spare Tire Hold Down Nut; 5/16"-18 Thread; 3.88" wide; Zinc Finish; Various Models

OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....

Product#: 153580

1959-72 Buick, Chevy Pontiac, Oldsmobile; Trunk Latch Mounting Bolt Set; Various Models

Reproduction of the original 1/4-20 x 5/8 Hex Head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...

Product#: 20066400

1965-74 GM; Spare Tire Hold Down Rod Anchor Plate; Various GM Models; Reproduction

Be sure to protect your spare tire from unnecessary movement by making sure the spare tire anchor plate is correctly mounted. Acts as a clamp by holding the spare tire hold down rod in place after the nut is tightened....

Product#: K78000A

1967-69 Camaro, Firebird; Standard Spare Tire Cover; Houndstooth; Gray & White; with 14" or 15" Spare; Slip-On Design

This spare tire cover can be used for any 14" or 15" spare on 1962-81 Camaro, Firebird, or any other GM vehicle with a standard spare tire. Will look great when adding a trunk mat in the same Houndstooth design. a The spare...

Product#: GN110671

1968-91 GM Door / Trunk Key Blank "D" Code (Late Style Key)

Un-cut replacement key for the indicated code listed for 1968-91 GM models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct letter...

Product#: N15700

1968-74 Chevy II, Nova, Apollo, Ventura, Omega; Rear Seat to Trunk Partition Panel; Black

Reproduction of the original style rear seat to trunk partition panel designed for use with 1968-74 Chevy II, Nova, 1971-74 Ventura, Omega, and Apollo models. This divider fits directly behind the rear seat and covers the...

Product#: GN110676

1978-87 GM Late Design; 1967-73 Ford Mustang; Trunk Lock Shaft

Trunk lock cylinder shaft for various 1967-73 Ford and 1978-87 GM models. Shaft goes at the end of the trunk lock cylinder, opens trunk when key is turned. Service replacement for some models.

Product#: TR1403S

1961-1977 Various Buick Vehicles Skylark, Riviera, Electra; Trunk Accessory/Auxiliary Mat; GM# 981403

Reproduction OEM accessory rubber trunk mat with Buick shields logo for 1961-77 Buick models including Skylark, Electra and Riviera. This is an auxiliary mat that goes on top of the felt covering. This is an officially...

Product#: K941

1962-81 Trunk Lock Cylinder Gasket ; Die-Cut Replacement

Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...

Product#: 9781956

1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-1/4"; Standard Size; Various Models

Correct reproduction rubber lug wrench sleeve for the tirejack and wrench assembly. This special rubber storage sleeve was found originally on many GM car models. Manufactured from quality rubber material, this sleeve slides...

Product#: GN110670

1983 and 1987 GM Door and Trunk Key Blank "B" Code

Un-cut replacement key for the indicated code listed for 1983 and 1987 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct...

Product#: GN110673

1986 GM Door and Trunk Key Blank "K" Code

Un-cut replacement key for the indicated code listed for 1986 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct letter code.

Product#: TB20

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; GM Gray Houndstooth

Beautifully designed, hand-crafted GM gray houndstooth pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed...

Product#: 20291279

1971-81 Buick, Chevy, Pontiac, Olds;,Rear Trunk Latch Lock Assembly; Various GM Models

Reproduction of the original trunk latch assembly designed for use on various GM models including 1971-81 Camaro and Firebird. This reproduction features a black electrophoretically deposited coating (EDP, or E-coat) for...

Product#: TB19

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; GM Aqua Houndstooth

Beautifully designed, hand-crafted GM aqua houndstooth pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed...

Product#: TB23

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; GM Crowsfoot Pattern

Beautifully designed, hand-crafted GM crowsfoot pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed from...

Product#: TB22

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; GM Gray Herringbone Pattern

Beautifully designed, hand-crafted GM gray herringbone pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed...

Product#: TB21

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; GM Aqua Herringbone

Beautifully designed, hand-crafted GM aqua herringbone pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed...

Product#: K78008B

1962-79 Nova, Camaro, Firebird, Impala; Spare Tire Cover; w/Fiberboard; 15"; Black/Aqua Houndstooth

Reproduction of the original style spare tire cover for use with various 1962-79 GM models with a 15" spare tire as listed below. This cover is manufactured in quality black and aquaHoundstooth pattern. Each cover includes a...

Product#: K78007B

1962-79 Nova, Camaro, Firebird, Impala; Spare Tire Cover; w/Fiberboard; 14"; Aqua/Black Houndstooth

Reproduction of the original style spare tire cover for use with various 1962-79 GM models with a 14" spare tire. This cover is manufactured in quality aqua and black Houndstooth pattern. Each cover includes a offers a...

Product#: TK136

1968-69 Camaro, 1967-68, 74-78 Firebird Door and Trunk Lock Set with Late Style Key

Complete set designed to replace your door and trunk lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and trunk cylinders. Includes door lock retainers, gaskets and...

Product#: K78008A

1962-79 Nova, Camaro, Firebird, Impala; Spare Tire Cover; w/Fiberboard; 15"; Gray/Black Houndstooth

Reproduction of the original style spare tire cover designed for use with various 1962-79 GM models with a 15" spare tire. Each cover is manufactured in correct gray and black Houndstooth pattern commonly used on many GM...

Product#: K78007A

1962-79 Nova, Camaro, Firebird, Impala; Spare Tire Cover; w/Fiberboard; 14"; Houndstooth; Gray & White

Reproduction of the original style spare tire cover for use with various 1962-79 GM models with a 14" spare tire as listed below. This cover is manufactured in quality gray and white Houndstooth pattern. Each cover includes a...

Product#: K78006A

14"/15" Slip Over Black / Aqua Houndstooth Standard Spare Tire Cove

The cover is manufactured in a heavy vinyl material and features a soft felt backing. This loose fit cover will fit 14" or 15" full size spare tire. Recommended for use with the reproduction vinyl trunk mat. Made in USA

Product#: K74256

1962-79 Nova, X Body; 67-81 Camaro, Firebird; Space Saver Spare Tire Cover; with Fiberboard; with 13" Spare; Crowsfoot; Black/Gray

Reproduction of the original style space saver spare tire cover (13") manufactured in black and gray with the Crowsfoot pattern. This cover offers a tapered fit because of the stiff fiberboard support. Also includes an...

Product#: K74255

1962-79 Nova, X Body; 67-81 Camaro, Firebird; Space Saver Spare Tire Cover; with Fiberboard; with 13" Spare; Houndstooth; Black/Aqua

Reproduction of the original style space saver spare tire cover (13") manufactured in black and aqua with the Houndstooth pattern. This cover offers a tapered fit because of the stiff fiberboard support. Also includes an...

Product#: GN110886

1981-87 Regal; Trunk Lock Cylinder Cover

Reproduction trunk lock cylinder cover for 1981-87 Regal models. Features adhesive backing for easy installation.

Product#: K78000B

1962-79 Nova, X Body; 67-81 Camaro, Firebird; Space Saver Spare Tire Cover; with 14", 15" Spare; Houndstooth; Gray & White

Reproduction of the original style space saver spare tire cover (13") manufactured in gray and white with the Houndstooth pattern. This cover offers a tapered fit because of the stiff fiberboard support. Also includes an...

Product#: 152616

1961-64 Chevy Impala; Trunk Lid Torque Rods; Convertible; Pair

Reproduction of the trunk hinge torsion springs for use with all 1961-64 GM full-size convertible models. These torque rods are essential for keeping pressure on the hinge assemblies which keep the trunk lid open. Each set...

Product#: 200202

1968-72 Chevelle, GTO, Skylark, GS, Cutlass, 442, LeMans, Tempest, Grand Prix, Monte Carlo; Trunk Floor Jack Alignment Bracket

Reproduction trunk floor jack alignment bracket for 1968-72 Chevelle, GTO, Skylark, GS, Cutlass, 442, LeMans, Tempest, Grand Prix, and Monte Carlo models. Manufactured in stamped steel to factory specifications, this bracket...

Product#: 9722033B

1968-72 Chevelle, Monte Carlo, Cutlass, 442, Special, GS, Skylark, GTO, Tempest, LeMans, Grand Prix; Trunk Hinge Mounting Brackets; Hinge to Wheelhouse Extensions; 2-Door Hardtop Models; LH and RH

Reproduction trunk hinge mounting brackets for 1968-72 Chevrolet Chevelle and Monte Carlo, Oldsmobile Cutlass and 442, Buick Special, GS, and Skylark, and Pontiac GTO, Tempest, LeMans, and Grand Prix 2-door hardtop models....