Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...


1977-90 Impala, Caprice, Buick, Oldsmobile, Pontiac, Cadillac; Fuel Tank; Without Filler Neck; GM4A; Zinc Coated; 24 Gallon
NEW

Product#: FT4020A

1977-90 Impala, Caprice, Buick, Oldsmobile, Pontiac, Cadillac; Fuel Tank; Without Filler Neck; GM4A; Zinc Coated; 24 Gallon

Reproduction fuel tank for 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac models. This fuel tank is manufactured in zinc-coated stamped steel to original factory specifications. Features a 24 gallons (91 liters)...


1977-90 Impala, Caprice, Buick, Oldsmobile, Pontiac, Wagon, 1978-87 El Camino, Caballero; Fuel Tank; Zinc; Without Filler Neck; 22 Gallon
NEW

Product#: FT4023A

1977-90 Impala, Caprice, Buick, Oldsmobile, Pontiac, Wagon, 1978-87 El Camino, Caballero; Fuel Tank; Zinc; Without Filler Neck; 22 Gallon

Reproduction fuel tank for 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon, El Camino and Caballero models. This fuel tank is manufactured in zinc-coated stamped steel to original factory...


Product#: FT4015A

1980-90 Buick, Cadillac, Chevrolet, Pontiac, Oldsmobile Full Size Models; Fuel Tank; with Fuel Neck; 24 Gallon; Zinc Plated; Except Station Wagon; Various Models

Reproduction of the original style fuel tank designed for use with 1980-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac Full Size models as listed except station wagon. This fuel tank is manufactured in zinc-coated...


Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...


Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod designed for use on various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the...


Product#: 3931449

1957-69 Buick, 1968-70 Chevrolet; Vented Gas Cap; with Markings

Reproduction GM gas cap that includes the correct "S" rivet and properly engraved markings. Manufactured and designed from the original OEM cap, the quality and materials are manufactured to exact specification with the "show...


Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...


Product#: CX5042

1954-59 Chevy, GMC Truck; Fuel Tank Sending Unit; Universal Fit; without Pick-Up Tube; 0-90 Ohm

Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...


Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...


Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
NEW

Product#: 9047G

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your...


Product#: 340637

1974-81 Outer Accelerator Pull Spring

Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...


Product#: TF700512

Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.

Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet...


Product#: K915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x .060"...


Product#: FT4007A

1968-70 Impala, Bel Air, Caprice, 1965-74 Bonneville, Catalina; Station Wagon Fuel Tank; Zinc Plated; with 1" Fuel Tank Neck; w/o EEC; 22 Gallon Tank

Reproduction of the original style fuel tank designed for use with 1968-70 Impala, Bel Air, Biscayne, Catalina, Bonneville station wagon models. This fuel tank is made of zinc-coated steel and has a capacity of 22 gallons (91...


Product#: FT4008A

1970-1974 Impala, 1970-76 GM Station Wagon; Fuel Tank; Zinc Coated; with 1" Fuel Tank Neck; with EEC; 22 Gallon Tank

Reproduction of the original style fuel tank designed for use with 1970-74 Impala, Bel Air, Biscayne, Catalina, Bonneville and GM full size station wagon models. This fuel tank is made of zinc-coated steel and has a capacity...


Product#: GM12B

1977-79 Impala, Carpice, GM Full Size, Except Wagon; Fuel Tank; Without Neck; GM12B; 19 Gallon

Replacement fuel tank for 1977-79 Chevrolet passenger models (except wagon). This fuel tank measures 39-3/4" x 26-1/2" x 9-1/4" and has a capacity of 19 gallons. Includes the fuel sender lock ring and o-ring gasket for a...


Product#: FT4014A

1977-1990 Impala, Caprice, Buick, Oldsmobile, Pontiac, Wagon, 1978-87 El Camino, Caballero; Fuel Tank; Zinc Coated; with Filler Neck; 22 Gallon

Reproduction of the original style fuel tank designed for use with 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon models. This fuel tank is manufactured in zinc-coated stamped steel to original...


Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
NEW

Product#: T76063

Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap

Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...


Product#: 62531

Electric Fuel Pump; with Cadmium Plated Housing; 100 GPH - 7 PSI

This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8"...