Product#: 748831

1970 Dodge Charger; Inner Rear Trunk Tail Lamp Panel Cover

Reproduction rear trunk tail lamp cover for 1970 Dodge Charger models. Each panel is vacuum formed to correct factory specifications and features the proper depth, configuration, and mounting points for an authentic...

Product#: MA774

1967-69 Dart, 1970-74 Challenger, Barracuda, Cuda; Rear Seat and Trunk Divider Jute Padding Insulation; 2 Door Hardtop

Replacing the trunk divider jute insulation will help reduce the amount of noise and heat that can enter the passenger area through the rear trunk compartment. This trunk divider jute insulation is die-cut replicating the...

Product#: K51499

1958-69 Trunk Spatter Paint; Black / Aqua; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51496

1970-1982 GM: Trunk Spatter Paint; Black / Gray; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51498

Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: ME1496

1967-69 Dart, 1970-74 Challenger, Barracuda, Cuda; Rear Seat to Trunk Divider Board

Reproduction of the original style rear seat to trunk divider board for use with 1970-74 Challenger, Barracuda, Cuda, and 1967-69 Dodge Dart 2 door hardtop models. Replacing the trunk divider board will help to reduce the...

Product#: DE010416

DEI Cool Tape Thermal Insulating Tape 1 1/2" x 30 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: K51497

Trunk Spatter Paint Clear Topcoat; 16 Oz Aerosol Can; Net Wt. 16 Oz.

After years of use your trunk area is probably in poor condition due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. This is the...

Product#: DE010408

DEI Cool Tape Thermal Insulating Tape 1 1/2" x 15 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: MB481TP

1968-70 Dodge Charger; Trunk Mat; Die Cut Vinyl; Tan Plaid

Your trunk compartment is an important (though often overlooked) aspect of your restoration. Bring your trunk compartment back to showroom condition with a replacement vinyl trunk mat. Made in USA Each mat is precision...

Product#: DE010468

DEI Cool Tape Thermal Insulating Tape 2" x 30 Feet

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

Product#: 9781957

1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-3/4", Large

Correct reproduction rubber lug wrench sleeve for the tirejack and wrench assembly. This special rubber storage sleeve was found originally on many GM car models. Manufactured from quality rubber material, this sleeve slides...

Product#: *K51491

OER Black and Aqua Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51494

OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51492

OER Gray and White Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51490

OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...

Product#: B10891

1/4-20 x 5/8 Hex Head SEMS Machine Screw,.750 Toothed Washer

Reproduction of the original 1/4-20 x 5/8 hex head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...

Product#: *K51495

OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51493

OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: MA788HB

1970-76 Dart, Demon, Duster; Vinyl Trunk Mat; 2 Door Coupe; Herringbone Pattern; Fleece Backed

Adding a trunk mat to a vehicle that never had one can do wonders for the appearance of the trunk area. The trunk compartment is an important, though often overlooked aspect of a good restoration. This authentic style trunk...

Product#: MA801PL

1970-76 Dodge, Plymouth; A-Body; Molded Rubber Trunk Mat; 2 Door Coupe, Hardtop; Plaid Pattern

Adding a molded rubber trunk mat to a vehicle that never had one can do wonders for the appearance of the trunk area. The trunk compartment is an important, though often overlooked aspect of a great restoration. This...

Product#: K1088

1967-81 Camaro, Firebird; Jack Handle; Lug Nut Wrench; 3/4"

Reproduction of the original lug nut wrench and jack handle designed for use with 1967-81 Camaro and Firebird models with 3/4" hex head lug nuts. This handle is also used to operate the tire jack. Manufactured in quality...

Product#: TR1200

Lokar Trunk Release Cable Set Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: TR1200B

Lokar Trunk Release Cable Set Black Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: CHT1300

Lokar Hood/Trunk Release Cable Set Stainless Steel

Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire. Hood...

Product#: UTC1415CF

Universal Spare Tire Cover 14" / 15" Crowsfeet Pattern Design; Gray / Black

Reproduction style spare tire cover for use with all 1960s, and 1970s GM models that included a 14" or 15" spare tire. This universal style spare tire cover is manufactured in a gray and black Crowsfoot design pattern that...

Product#: TB4

Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; Black

Beautifully designed, hand-crafted black vinyl tote bag to stylishly store almost anything you need to keep in the trunk area. Constructed from durable black vinyl material, the use of this handy bag is a great way to clean...

Product#: FB1000

1" Foam Paint Brush

Product#: MB412PL

1966-67 Coronet, GTX, Satellite; Vinyl Trunk Mat; 2 Door Hardtop; Gray Plaid Pattern; with Fleece Backed Vinyl

Reproduction of the original style trunk mat designed for use with 1966-67 Dodge and Plymouth B Body 2 door hardtop models as listed. Each mat is precision die-cut to original specifications to fit your trunk compartment...

Product#: MD2136

1966-72 Mopar A-Body / B-Body/ E-Body; Trunk Lock Set; With Replacement Style Keys

Complete trunk lock set for 1966-72 Mopar A/B-Body models includes coded lock, shafts, keys and hardware.

Product#: MD2146

1966-72 Mopar A-Body / B-Body Trunk Lock Set With Original Style Keys

Trunk lock set for 1966-72 Mopar A/B-Body models. Set includes a coded OEM lock, 3-1/4" shaft, retainer clip and OEM keys. Applications: A-Body 1966-69 Barracuda 1966-72 Dart 1966-72 Valiant 19 69-72 Swinger 1970-72 Duster...

Product#: MN1829

1963-74 Dodge, Plymouth A & B-Body; Trunk Lid Torque Rod Sliders; Pair

Reproduction of the original trunk torque rod sliders for use with Dodge and Plymouth A & B body models as listed below. Each slider is manufactured in quality injection molded ABS material for an authentic appearance and...

Product#: MD2114

1960-76 Dodge/Plymouth; Rubber Body and Trunk Plug; 1-7/8"; Each

Reproduction of the original style body and trunk rubber plug designed for use on most 1960-76 Dodge or Plymouth models where a 1-7/8" hole plug is required. Manufactured in quality rubber material for an original appearance,...

Product#: MP7152

1962-71 Chrysler, Dodge, Plymouth; T-Type Jack Assembly and Base; Gray

Reproduction of the original T-Type jack and base assembly specifically designed for use with 1962-71 Chrysler, Dodge, and Plymouth models as listed below. This jack assembly includes the jack base and vertical mast with...

Product#: MM1395

1962-74 Dodge, Plymouth; Trunk Lid Latch; without Power Release

Reproduction of the original trunk lock latch designed for use with various 1962-74 Dodge and Plymouth models. Each latch assembly is manufactured in stamped steel and features a new lock mechanism and latch. Includes a rust...

Product#: MM1430A

1968-70 Dodge Charger; Trunk Floor Extension; LH Drivers Side; EDP Coated

Reproduction of the original trunk floor extensions for use with 1968-70 Dodge Charger models. This often rusted or damaged extension panel, this panel is installed on the sides of the trunk pan where the trunk pan drops off...

Product#: MB569

1963-65 Dodge, Plymouth B-Body; Rear Seat to Trunk Divider Board; 2 Door Hardtop

Reproduction of the original style trunk divider board for use with 1963-65 Dodge and Plymouth B Body 2 door hardtop models. This reproduction trunk divider board is die-cut from black fiberboard material to perfectly replace...

Product#: MD2665

1973-76 Mopar A-Body / B-Body Trunk Lock Set With Replacement Style Keys

Complete trunk lock set for 1973-76 Mopar A and B-Body models includes coded lock, shafts, replacement keys and hardware. Applications: A-Body 1973-76 Dart Sport 1973-76 Swinger 1973-76 Duster 1973-76 Scamp 1973-76 Valiant...

Product#: 6023540

1963-74 Dodge, Plymouth; Spare Tire Wing Nut

Reproduction of the original spare tire wing nut designed for use with various 1963-74 Dodge and Plymouth models. Each nut is manufactured in stamped steel to factory specifications. Features same design, appearance, and...

Product#: MD2642

1966-76 Dodge, Plymouth, Chrysler; Trunk Key Blank; OEM; Un-Cut

Reproduction of the original style key blank that was used on most 1966-76 Dodge, Plymouth, and Chrysler models. This key is un-cut and features a "Pentastar" with the words "Chrysler Corporation" Simply take this blank key...

Product#: MD4048

1960-76 Dodge, Plymouth; Standard Spare Tire Cover; 14"; Plaid Design; Gray / Black

Make your trunk area look great by adding this easy-fit spare tire cover designed for use with any vehicle that has a 14" spare tire. This tire cover features a Plaid design which was common for many vehicles in the 60's and...

Product#: MD4050

1960-76 Dodge, Plymouth; Standard Spare Tire Cover; 15"; Gray Houndstooth Design

Make your trunk area look great by adding this easy-fit spare tire cover designed for use with any vehicle that has a 15" spare tire. This tire cover features a gray Houndstooth design which was common for many vehicles in...

Product#: MD4046

1960-76 Dodge, Plymouth; Standard Spare Tire Cover; 14"; Herringbone Design; Gray / Black

Make your trunk area look great by adding this easy-fit spare tire cover designed for use with any vehicle that has a 14" spare tire. This tire cover features a Herringbone design which was common for many vehicles in the...

Product#: MD4051

1960-76 Dodge, Plymouth; Standard Spare Tire Cover; 15"; Plaid Design

Make your trunk area look great by adding this easy-fit spare tire cover designed for use with any vehicle that has a 15" spare tire. This tire cover features a Houndstooth design which was common for many vehicles in the...

Product#: MP7171

1962-71 Mopar; Car Jack Base Plate; For T-Type Upright Jack Posts; With Correct Markings; Black

Reproduction car jack base for various 1962-71 Mopar models with a "T" type upright jack. Fits all 1962-71 models that use a removable jack hook and "T" type upright jack post. Features the correct black finish and all the...

Product#: MD8062

1968-76 Dodge, Plymouth; Jack Storage Spring

Replacement bumper jack storage spring for various 1968-76 Dodge, Plymouth models. This spring secures the jack mechanism in its storage position. Two required per vehicle.

Product#: MD4047

1960-76 Dodge, Plymouth; Standard Spare Tire Cover; 14"; Houndstooth Design; Gray / Black

Make your trunk area look great by adding this easy-fit spare tire cover designed for use with any vehicle that has a 14" spare tire. This tire cover features a Houndstooth design which was common for many vehicles in the...

Product#: MD4049

1960-76 Dodge, Plymouth; Standard Spare Tire Cover; 15"; Herringbone Design; Gray / Black

Make your trunk area look great by adding this easy-fit spare tire cover designed for use with any vehicle that has a 15" spare tire. This tire cover features a Herringbone design which was common for many vehicles in the...

Product#: MP7170

1962-71 Mopar; Car Jack Base Plate; For T-Type Upright Jack Posts; With Correct Markings; Gray

Reproduction car jack base for various 1962-71 Mopar models with a "T" type upright jack. Fits all 1962-71 models that use a removable jack hook and "T" type upright jack post. Features the correct gray finish and all the...

Product#: TB18

1960-79 Chrysler. Dodge, Plymouth; Trunk Tote Bag; No Logo; Large; 21" X 9" X 9"; Chrysler Gray Plaid Pattern

Beautifully designed, hand-crafted Chrysler gray plaid pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is constructed...

Product#: TB17

1960-79 Chrysler; Trunk Tote Bag; Gray Houndstooth Pattern; w/o Logo; Large; 21" x 9" x 9"

Beautifully designed, hand-crafted Chrysler gray houndstooth pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is...

Product#: TB16

1960-79 Chrysler, Dodge, Plymouth; Trunk Tote Bag; No Logo; Large; 21" x 9" x 9"; Gray Herringbone

Beautifully designed, hand-crafted Chrysler gray herringbone pattern tote bag to stylishly store almost anything you need to keep in the trunk area. Designed to match our other trunk accessories, this large tote bag is...

Product#: MP7153

1962-71 Chrysler, Dodge, Plymouth; T-Type Jack Assembly and Base; Black

Reproduction of the original T-Type jack and base assembly specifically designed for use with 1962-71 Chrysler, Dodge, and Plymouth models as listed below. This jack assembly includes the jack base and vertical mast with...

Product#: MD1639

1970-72 Dodge Plymouth A, B, E-Body, Glove Box, Trunk Lock Set, With Original Style Keys

Replacement glove and trunk lock set for various 1970-72 Mopar A, B and E-Body models. Each set includes coded locks, OEM keys and hardware. Applications: A-Body 1970-72 Dart 1970-72 Swinger 1970-72 Duster 1970-72 Valiant...

Product#: MD2653

1966-69 Dodge Plymouth B-Body; Glove Box, Console, Trunk Lock Set; With Original Style Keys

This lock set is designed to replace your glove box, console, and trunk lock assemblies. Each set comes complete with coded locks with OEM keys, pawls, clips and gaskets. B-Body Applications: 1966-69 Belvedere 1967-69 GTX...

Product#: MP7155

1962-76 Mopar A Body, 1970-74 E Body, 1962-65 B Body; Jack Handle, Short Style; Black

Reproduction of the original jack handle for use with 1962-76 Chrysler, Dodge, and Plymouth models. This is a high quality reproduction of the original jack handle / tire iron. This is considered the short style handle that...

Product#: MB571

1968-70 Dodge, Plymouth B Body; Rear Seat to Trunk Divider Board; 2 Door Hardtop

Reproduction of the original rear trunk divider board for use with 1968-70 Dodge Charger, Coronet, Plymouth GTX, Road Runner, Satellite, and Super Bee 2-door hardtop models as listed. Each trunk divider is die-cut with...

Product#: MM1873

1969-74 Dodge, Plymouth B-Body, E-Body; Spare Tire Mounting Stud; 6" Bolt

Secure your spare tire properly with this replacement spare tire mounting stud for 1969-1974 B-Body and 1970-1974 E-Body models equipped with 60 series spare tires. Designed to replace worn, damaged, or missing original...

Product#: MP7154

1962-71 Dodge, Plymouth B, C-Body; Jack Handle; Long Style; Black

Reproduction of the original jack handle for use with 1962-71 Chrysler, Dodge, and Plymouth models. This is a high quality reproduction of the original jack handle / tire iron. This is considered the long style handle that...

Product#: MM1606

1967-74 Dodge, Plymouth A,B,E-Body; Jack Spring Hook; Driver Side

Reproduction jack spring hook for 1968-74 Dodge & Plymouth A, B, and E-Body models. Each bracket is manufactured in stamped steel to the original factory configuration. Replace the damaged or missing original with this...