Classic Industries Restoration Parts and Accessories - Controls

Reproduction of the original fan selector control knob designed for use on 1987-89 Mustangs. Replace your missing or broken fan control knob with this quality reproduction. The fan knob dictates the blower fan speed. ...

This Gen IV SureFit? control panel kit is designed to bolt into the OEM dash location and work directly with the Gen IV SureFit? evaporator system for your vehicle. The kit includes a replacement control panel designed to...

Reproduction of the heater control bezel for all 1955-56 models equipped with a factory heater. Manufactured with a bright chrome finish as original.

This replacement relay is used for various electrical circuits. Burned out relays should be replaced to maintain full operation of your vehicle's electrical systems. Camaro applications: 1996-97 horn relay 1994-02 blower...

Vintage Air Gen IV SureFit control panel kit Ford 1961-66 Ford F-100. This kit is designed to work directly with the Gen IV SureFit evaporator system for your vehicle. The kit includes rotary controls and system function...

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

Reproduction heater cable clamp designed for use on 1964-68 Mustangs. This is the clamp that secures the cable to heater control assembly, heater plenum and heater box. Sold individually. Includes 1 black oxide clamp and 1...

Maximize your system with this improved switch featuring a rear harness set up that allows the resistor to be attached in the rear of controls.

Reproduction of the original air conditioning selector control knob designed for use on 1987-89 Mustangs. Replace your missing or broken select knob with this quality reproduction. The Select Knob is used to select between...

Blower motor resistor for 1969 Firebird models with factory AC. This resistor is wired between the blower motor and blower switch and allows the blower fan speed to be controlled.

This blower motor relay is used in the blower motor circuit of 1972-80 Firebird models. Defective relays should be replaced to maintain proper operation of heating, ventilation, and air conditioning systems. Applications: ...

Reproduction of the original heater control knobs designed for use on 1984-86 Mustangs. Each knob is manufactured to exact factory specifications offering an original appearance and fit. Each set includes 4 black knobs that...

Get your heater or air conditioning working properly again with these quality reproduction control panel cables for your 1960-63 models with standard heater.

Classic Industries offers this replacement blower motor relay for your 1977-82 models with air conditioning This is a Delco service replacement relay which may differ cosmetically from the original. Camaro applications:...

These reproduction clips are used to connect the heater cables to the heater and vent assembly. Set includes screws.

Reproduction heater blower switch for 1973-78 Ford F-Series truck and 1978 Bronco. This is a direct-fit replacement for F100. F250, and F350 pickups with 4 terminal heater blower switches. Replaces Ford part# D3AZ-19986-A.

OER® reproduction of the original dash heater control knobs designed for use on various 1965-1989 GM models. Each knob is reproduced to exact dimensions and cosmetically correct. Manufactured in injection molded ABS and...

Heater temperature control bezel and cable for 1966-67 Ford Broncos. This accurate reproduction is designed to fit, function, and appear just like the original. Replaces Ford part # C6TZ-18518-E.

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

Compressor Cut Off Switch: We offer original GM compressor cut off switches to replace your non-functioning or missing switch.

Replace your cracked or faded heater control lenses with one of these high quality plastic reproductions. This center dash lens is available for cars with air conditioning.

Heater temperature control bezel and cable for 1968-72 Ford Broncos. This accurate reproduction is designed to fit, function, and appear just like the original. Replaces Ford part # C8TZ-18518-B.

Reproduction of the original side vent control assembly with black knob for use with all 1960-63 models. Sold individually, will work driver side (LH) applications.

Finish your 1973-74 Mopar B-Body dash restoration with this premium quality dash heater control decal. Features correct fonts and colors to give your dash a showroom-new appearance. Note: For use on either standar d or...

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

Finish your 1971-72 Mopar B-Body dash restoration with this premium quality dash heater control decal. Features correct fonts and colors to give your dash a showroom-new appearance. Note: For use on either standa rd or...

Defroster control cable for 1968-72 Ford Broncos. This accurate reproduction is designed to fit, function, and appear just like the original. Replaces Ford part # C8TZ-18552-A.

Ditch the stock plastic OEM AC control knobs from your 1987-89 Ford Mustang for a set of precision CNC Machined 1-9/16" AC Control Knobs to add an extra level of personalization to your Mustang and separate your pony car from...

Reproduction of the original side vent control assembly with black knob for use with all 1955-59 models. Sold individually, will work for Right or Left applications, 2 required.

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

Reproduction AC control panel light reflector shroud for 1967-76 A -Body models. Manufactured in cardboard as original for an authentic replacement.

Quality OER reproduction of the original heater control knobs for fan, heat, temperature and defroster controls. Beautifully chrome plated with a bright finish. Set includes four chrome die-cast knobs with the correct...

Reproduction AC control panel light reflector shrouds for 1968-70 B-Body models. Manufactured in cardboard as original for an authentic replacement.

Reproduction heater control levers for 1955 Chevrolet full size models. Designed to fit and function as original.

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

1973-75 Century 1973-82 Regal Chevrolet/GMC Applications: 1971-81 Impala/Full Size 1973-75 Chevelle/li> 1972-77 Sprint/li> 1973-78 C/K Pickup/Jimmy/Blazer 1976-81 Malibu/El Camino 1976-81 Monte Carlo 1980-81 Citation...

Vintage Air SureFit control panel for 1969-70 Mopar B-Body models with SureFit Gen IV evaporator systems. Kit includes a replacement control panel designed to bolt directly into the OEM dash, a wiring harness, and detailed...

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

This straight-tab retainer clip for 1955-57 Chevrolet full size models is used to hold the heater cable in place.

Reproduction of the original temperature control cable designed for use on 1987-93 Mustang models. Manufactured to factory specifications for proper fitment and function. A rusted cable can result in difficulty turning the...

Reproduction of the original air conditioning control trim panel bezel designed for use on 1990-93 Mustangs. Replace a damaged, worn out, or missing AC control trim panel with OEM style replacement. Manufactured in injection...

Reproduction of the original standard dash bezel set designed for use on 1967-69 Dodge Dart models without AC. Each reproduction heater control bezel is manufactured in injection molded ABS, and chrome plated replicating the...

Reproduction of the original dash heater control bezel designed for use on 1967-69 Dodge Dart models without air conditioning. Each bezel is manufactured in quality injection molded ABS to factory specifications. Features the...

Reproduction of the original air conditioning control knobs designed for use on 1970-74 Mopar E-Body models. Each control knob is designed and manufactured to replicate the original in quality and appearance. Injection molded...

Reproduction of the original heater control panel insert designed for use on 1967 Mustangs with deluxe interiors. This brushed aluminum insert adheres to the surface of the heater control panel with deluxe interior, and...

Quality reproduction of the original air conditioning control knob designed for use on 1990-93 Mustangs. Reproduced to match the original perfectly. Sold individually. Applications: 1990-1993 Ford Mustang

Heater temperature control bezel and cable for 1973-77 Ford Broncos. This accurate reproduction is designed to fit, function, and appear just like the original. Replaces Ford part # D3TZ-18518-C.

Reproduction air conditioning temperature control cable for 1967-68 Ford Mustang and Mercury Cougar. This cable connects the temperature lever to the evaporator/heater plenum.

This offset-tab retainer clip for 1955-57 Chevrolet full size models is used to hold the heater cable in place.

Reproduction of the original heater switch plate designed for use on 1964-66 Mustangs. Each plate is a manufactured to duplicate the original in quality and appearance. This is the chrome die-cast metal plate that the heater...

Reproduction of the original heater fan switch designed for use on various 1969-79 GM models without air conditioning. Each switch is a replication of the original heater fan switch and installs into the heater control...

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

Vintage Air Gen IV SureFit control panel kit Ford 1968-72 Ford F-100. This control panel kit is designed to work directly with the Gen IV SureFit evaporator system in 5th generation F-100s. It includes cable converters,...

Reproduction heater control lens for Camaro models without AC. Crystal clear acrylic lens with correct white scripts and correct coloring where required. Includes a new die cut automotive grade black backing paper.

These poly covered cables with Polyethylene lining provide reduced resistance, maximum flexibility and instant response even during severe weather conditions. Note: The outer shell can be removed to create an orig inal...

Replace the old or worn out temperature control cable for your 1965-66 Mustang. This temperature cable is designed to replace the factory original. They fit seamlessly into the heating configuration of your 1965-66 Mustang.