Product#: A11109

Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate

Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...

Product#: 1662007

1968-69 Camaro SS; Hood Louver Ornament Set; with Hardware; Pair; "Show Quality"

Reproduction of the original die-cast hood louvers designed for use with all 1968-69 Camaro Super Sport models equipped with a 350 or 396 engine. Manufactured with OER® exclusive tooling to exact factory specifications....

Product#: B4244

1964-81 GM; Hood Hinge Bolt Set; 8 Pieces; 3/8-16 x 13/16" Flat Tip; Black Phosphate

Correct hardware can make any installation job easier. These hood hinge bolts are correct for a wide variety of GM vehicles including 1965-72 Chevrolet Impala and full size passenger car models. Can be used for 1958-64 Impala...

Product#: T4095

Universal Chrome Hood Pin Set; Flip-Over Style; with Landyards

Universal hood pin set for various models. Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. This universal style hood pin set includes pine,...

Product#: K531

1967-69 Camaro, Firebird; Hood Insulation Fastener Set; 20 Piece Set; Various Models

When it comes to restoring your GM classic, the smallest details often make the biggest difference. These reproduction hood insulation fasteners are the perfect finishing touch for your underhood restoration. Correct in every...

Product#: *R1383

1970-2002 GM; Hood Insulation Fastener Set; 5/16" Stem Diameter; 3/4" Stem Length; 1-3/4" Head Diameter; 20-Piece Set

Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...

Product#: 748621

1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set

Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...

Product#: *K3031

Hood Insulation Fastener Set; Nylon; 2" Square Head; 1/4" Stem Dia.; 9/16" Stem Length; 20 Piece Set

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement...

Product#: 16700G

Chrome Hood Pin Set; Hair Pin Style

Reproduction of the deluxe style hood pin set with hair pin design. Set includes all necessary components to replace the original hood pin including 2 hairpin style hood pins, 2 plates, 4 bolts and 8 mounting screws. Lanyards...

Product#: 16700H

Universal Chrome Deluxe Hood Pin Set; Flip-Over Style; without Lanyards

Reproduction hood pin set with 1/4" "flip over" hood pin design. Set includes all necessary components to replace the original hood pin including 2 "flip over" style hood pins, 2 plates, 4 bolts and 8 mounting screws. Can be...

Product#: 16700K

Hood Pin Lanyard; Plastic Coated Cable; Universal Fit

Strong and ready for installation on any vehicle requiring hood pin lanyards. This design can be used for any muscle car or classic truck that requires lanyards for hood pin retention. Plastic coated design is strong and long...

Product#: 14884

1947-55 Chevrolet Pickup Truck; Hood Latch Assembly

Reproduction of the original hood latch assembly for 1947-55 Chevrolet Pickup truck models. Each latch is manufactured to factory specifications featuring pre-drilled mounting holes and the correct spring mechanism for smooth...

Product#: *16700GK

Hood Pin Kit; with Lanyard; Hair Pin Style; Universal Fit

Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. Each set uses the two piece hairpin style pins ideal for installations where a...

Product#: K638

Universal Hood Pin Rubber Gasket; Each

Reproduction hood pin rubber gasket found on models with hood pins. Each gasket is die-cut to the proper dimension. This gasket will also fit a wide variety of aftermarket hood pins. Sold individually. Use as required. Check...

Product#: A1015

1970-2002 GM; Hood Insulation Fastener; Each

Replacement black nylon hood insulation fastener is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models. It...

Product#: 3910667

1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; LH; Driver Side

Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...

Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...

Product#: HR1100B

Lokar Billet Aluminum Hood Release Cable Set with Black Steel Housing

Lokar's premium hood release set comes complete with a machined billet aluminum handle assembly and cable. The cable is cut-to-fit, designed with a specially extruded liner for extended life of the cable, aluminum fittings...

Product#: 85L220

1979-82 Ford Mustang; Cobra, LX, Turbo, GT; Hood Scoop Grille

Reproduction of the original hood scoop grill designed for use on 1979-82 Mustang Cobra models. Each hood scoop grill is manufactured in injection molded plastic utilizing original Ford tooling for a perfect fit. Replace the...

Product#: CB54701

Ring Brothers Universal Billet Hood Adjusters; 0.875" Long; 5/16"-18 Thread; Natural

Ringbrothers universal billet hood adjusters. These bumpers measure 0.875" long to fit an array of classic and late models cars and trucks. Swap out your stock hood bumpers with Ringbrothers innovative billet hood adjusters....

Product#: 153343

Hex Head Bolt Set; 3/8"-16 x 1"; For Hood Hinge; Stainless Steel; Black Oxide Coated

Reproduction hood hinge bolts for various GM models requiring 3/8"-16 x 1" long bolts, including 1973-80 Chevy/GMC trucks and 1962-67 Nova models. Manufactured out of stainless steel for durability. Set includes 10 indented...

Product#: 401024

Lokar Adjustable 6 Position Polished Aluminum Self Locking Hood Prop

Constructed of high quality aluminum and stainless steel, this adjustable hood prop offers great looks as well as functionality. When the hood is raised, the hood prop will automatically lock itself into position. A quick...

Product#: TR16796AB

1961-66 Ford F100, F250, F350 Truck; Hood Hinge Set; Pair; Black EDP Coated

Reproduction of the original hood hinges designed for use with 1961-66 Ford F-Series F100, F250, F350 pickup trucks. Each hinge is quality stamped steel manufactured to correct factory specifications. This hinge set comes...

Product#: CHT1300B

Lokar Hood/Trunk Release Cable Set Black

Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire. Hood...

Product#: MS11045P

Billet Aluminum Hood Pin Kit; Blind Mounting Hole; Smooth Finish; Bright Polished Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: SP1606R

Sparco Racing Hood Pin Set; Red

Pair of steel pin hooks with guided plug and click locking. These pins are very robust and reliable. Necessary hardware for istallation is included.

Product#: 153344

Hex Head Bolt Set; 3/8"-16 x 1"; For Hood Hinge; Stainless Steel

Reproduction hood hinge bolts for various GM models requiring 3/8"-16 x 1" long bolts, including 1973-80 Chevy/GMC trucks and 1962-67 Nova models. Manufactured out of stainless steel for durability. Set includes 10 indented...

Product#: 153341

Hex Head Body Bolt Set; 3/8"-16 x 7/8"; For Hood Hinges; 8-Pieces; Stainless; Black Oxide Finish

Reproduction hood hinge bolts for a wide variety of vehicles requiring a 3/8"-16 x 7/8" bolt, including 1967-81 Camaro among other models. Manufactured out of stainless steel for durability, coated in black oxide finish. Set...

Product#: K551

1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models

Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...

Product#: AK120B

Hex Head Body Bolt Set; 3/8"-16 x 13/16"; For Hood Hinges; 8-Pieces; Flat Tip; Polished Stainless

Reproduction hood hinge bolts for a wide variety of vehicles requiring a 3/8"-16 x 13/16" bolt, including 1967-81 Camaro among other models. Manufactured out of stainless steel with a polished finish. Set contains 8 head...

Product#: K1005

1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; Hood Hinge to Fender; 8 Piece Set; Various Models

OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....

Product#: MS11045BA

Billet Aluminum Hood Pin Kit; Blind Mounting Hole; Smooth Finish; Black Anodized Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: CB54702

Ring Brothers Universal Billet Hood Adjusters; 0.875" Long; 5/16"-18 Thread; Black

Ringbrothers universal billet hood adjusters. These bumpers measure 0.875" long to fit an array of classic and late models cars and trucks. Swap out your stock hood bumpers with Ringbrothers innovative billet hood adjusters....

Product#: MS11040BA

Billet Aluminum Hood Pin Kit; Diamond Design Finish; Black Anodized Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11040CA

Billet Aluminum Hood Pin Kit; Diamond Design Finish; Clear Anodized Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: TL20013

Track Spec Universal Angled Hood Louvers; 4" x 12"; Pair

Track Spec light weight aluminum universal hood louver kit. Each vent is designed for structural rigidity and powder coated satin black for a durable and clean finish. Includes detailed instructions and all hardware required...

Product#: AK120A

Hex Head Body Bolt Set; 3/8"-16 x 13/16"; For Hood Hinges; 8-Pieces; Flat Tip; Polished Chrome

Reproduction hood hinge bolts for a wide variety of vehicles requiring a 3/8"-16 x 13/16" bolt, including 1967-81 Camaro among other models. Manufactured out of steel with a chrome plated finish. Set contains 8 head bolts...

Product#: CB40049

Ringbrothers Defiant Universal Billet Hood Pins; Natural Finish

Give the outside of your ride some high tech flair with these Ringbrothers billet hood pins. Machined from 6061-T6 billet aluminum, these hood pins feature a base that screws into core support for easy installation and...

Product#: HR1100

Lokar Billet Aluminum Hood Release Cable Set with Stainless Steel Housing

Lokars premium hood release set comes complete with a machined billet aluminum handle assembly and cable. The cable is cut-to-fit, designed with a specially extruded liner for extended life of the cable, aluminum fittings and...

Product#: CB54712

Ring Brothers Universal Billet Hood Adjusters; 1.25" Long; 5/16"-18 Thread; Black

Ringbrothers universal billet hood adjusters. These bumpers measure 1.25" long to fit an array of classic and late models cars and trucks. Swap out your stock hood bumpers with Ringbrothers innovative billet hood adjusters....

Product#: TL20015

Track Spec; Universal Hood Louvers; 4" x12"; Pair

Track Spec light weight aluminum universal hood louver kit. Each vent is designed for structural rigidity and powder coated satin black for a durable and clean finish. Includes detailed instructions and all hardware required...

Product#: CB54711

Ring Brothers Universal Billet Hood Adjusters; 1.25" Long; 5/16"-18 Thread; Natural

Ringbrothers universal billet hood adjusters. These bumpers measure 1.25" long to fit an array of classic and late models cars and trucks. Swap out your stock hood bumpers with Ringbrothers innovative billet hood adjusters....

Product#: 153342

Hex Head Body Bolt Set; 3/8"-16 x 7/8"; For Hood Hinges; 8-Pieces; Stainless Steel

Reproduction hood hinge bolts for a wide variety of vehicles requiring a 3/8"-16 x 7/8" bolt, including 1967-81 Camaro among other models. Manufactured out of stainless steel for durability with a plain finish. Set contains 8...

Product#: MS11044CA

Billet Aluminum Hood Pin Kit; Through Bolt Mounting Hole; Smooth Finish; Clear Anodized Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11045CA

Billet Aluminum Hood Pin Kit; Blind Mounting Hole; Smooth Finish; Clear Anodized Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11044MB

Billet Aluminum Hood Pin Kit; Through Bolt Mounting Hole; Smooth Finish; Matte Black Fusioncoat Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11040M

Billet Aluminum Hood Pin Kit; Diamond Design Finish; Machined Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: SP1606S

Sparco Racing Hood Pin Set; Silver

Pair of steel pin hooks with guided plug and click locking. These pins are very robust and reliable. Necessary hardware for istallation is included.

Product#: MS11045MB

Billet Aluminum Hood Pin Kit; Blind Mounting Hole; Smooth Finish; Matte Black Fusioncoat Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11040P

Billet Aluminum Hood Pin Kit; Diamond Design Finish; Bright Polished Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11044M

Billet Aluminum Hood Pin Kit; Through Bolt Mounting Hole; Smooth Finish; Machined Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11044BA

Billet Aluminum Hood Pin Kit; Through Bolt Mounting Hole; Smooth Finish; Black Anodized Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11045M

Billet Aluminum Hood Pin Kit; Blind Mounting Hole; Smooth Finish; Machined Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: MS11044P

Billet Aluminum Hood Pin Kit; Through Bolt Mounting Hole; Smooth Finish; Bright Polished Finish

There's nothing more frightening or potentially more damaging than a hood that's blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car....

Product#: TL20008

Track Spec Hood Louver Set - Designed for 2005-13 Corvette

Track Spec light weight aluminum three piece hood louver kit for 2005-13 Corvette. Each vent is designed for structural rigidity and contoured to fit the specific vehicle. Powder coated satin black for a durable and clean...

Product#: SP1606B

Sparco Racing Hood Pin Set; Blue

Pair of steel pin hooks with guided plug and click locking. These pins are very robust and reliable. Necessary hardware for istallation is included.

Product#: DE050129

DEI Boom Mat; Under Hood Black Thermal Acoustic Lining Sheet; Trim to Fit; 32" x 59" Sheet

DEI Black Under Hood thermal acoustic lining. Designed specifically for under hood applications, this lining will greatly reduce the heat, noise, and vibration coming from your engine compartment. This black self adhesive...

Product#: CX1633

1958-59 Chevrolet, GMC Pickup, Suburban; Hood Hinge Assembly; LH Drivers Side

Reproduction of the original hood hinge designed for use on 1958-1959 Chevrolet and GMC pickup trucks. Restore proper hood operation by replacing the old or worn out original with this quality reproduction. This hood hinge...

Product#: 12333249

1978-87 Regal, Century, Skyhawk; Hood Lift Support Gas Shock; For Steel Hood; Each

Reproduction steel hood lift support for 1978-87 Buick Skyhawk and 1978-87 G-Body models including Century and Regal. Fitment also includes 1984-87 Grand National & 1987 GNX. Manufactured to factory specifications for steel...

Product#: 3907626

1970-81 Camaro, Firebird, 67, 69 Impala, Caprice, Hood Hinge Spring; Each; Various Models

Reproduction of the original hood hinge spring designed for use on various GM vehicles. Each spring is manufactured to replicate the original in quality and design. Will fit and install as original and features OE tension...