Product#: CC1-CM

1964-66; Mustang; Cowl Vent Grill Cover

Protect your outer cowl top vent grill area from debris, water, leaves or other elements that might enter to cause damage to the firewall or engine compartment. This cowl vent grill cover looks great and helps to eliminate...

Product#: CS111188

1988-98 Chevrolet; GMC; Wiper Cowl Panel End Seals; Outer; LH and RH

Reproduction wiper cowl panel end seals for various 1988-98 Chevrolet and GMC truck models. These are the rear outer wiper cowl end seals. It sits behind the cowl seal by the hinge on the left and right side. Manufactured to...

Product#: TF400336

1955-56 Chevrolet LH Cowl Side Panel

This is a commonly rusted area that usually needs to be replaced. Each panel is manufactured in steel to OE specifications allowing proper fit when installing. Made in the USA.

Product#: K842

1970-81 Camaro, Firebird; Upper Dash / Cowl Panel; EDP Coated

Reproduction upper dash and cowl panel for 1970-81 Camaro and Firebird models. A common area for rust on these vehicles is just below the windshield, and this reproduction provides the perfect solution. Each panel is a finely...

Product#: G10276

1988-2002 Chevrolet, GMC GMT400 Truck and SUV; Cowl Vent Grille Center

This 1988-2002 GM/GMC Cowl Vent Grille Center is a genuine GM replacement part. The corresponding GM part number is 15043016. The part is made of black ABS plastic. Being a genuine GM part, it will fit your vehicle perfectly....

Product#: TF401212

1955-56 Bel Air, 150, 210, Nomad; Smooth Top Cowl Vent Grill Panel

Replacement cowl vent grill panel for 1955-56 Tri-5 models. Designed to replace the original vent panel while eliminating the vent louvers and giving your vehicle a clean smooth look. Comes painted in a rust preventative...

Product#: K841

1967-69 Camaro; Cowl Top Vent Grill Panel; EDP coated

Restore the factory appearance and functionality of your engine compartment with this reproduction cowl top vent grille panel for 1967-1969 Chevrolet Camaro models. Manufactured as an authentic reproduction of the original...

Product#: 14349

1967-69 Pontiac Firebird; Upper Cowl Panel Assembly; EDP Coated

Reproduction of the original upper cowl panel for use with 1967-69 Pontiac Firebird models. Each upper cowl panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: 152617

1965-67 Impala, Bel Air, Biscayne, Caprice; Upper & Lower Cowl Panel Assembly; EDP Coating

Reproduction upper and lower cowl panel assembly for 1965-67 Impala, Bel Air, Biscayne and Caprice models. Each cowl panel assembly is manufactured in stamped steel to original factory specifications featuring correct...

Product#: TR02054C

1953-56 Ford F-100/F-250 Truck; Cowl Side Panel; Outer Skin; 32" Tall; RH Passenger Side

Reproduction cowl side panel outer skin for 1953-56 Ford F-Series, F100, and F250 trucks. This full height repair panel is 32" tall and extends from the bottom of the cab to the upper door hinge. It is manufactured from...

Product#: C2497

1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Upper Cowl Panel; Outer Cover; with Antenna Provision; EDP Coated

Reproduction outer cowl panel for 1967-72 Chevrolet and GMC truck models. Each outer cowl panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and...

Product#: CX1824

1947-55 Chevy, GMC Truck; Inner Cowl Side Lower Repair Panel; RH Passenger Side

Reproduction of the OE style outer sheet metal portion of the side cowl panel for use with 1947-55 Chevrolet and GMC truck models. Manufactured in stamped steel to replicate the original configuration featuring correct...

Product#: 02228C

1969-70 Mustang, Cougar; Cowl Vent Grill Panel; EDP Coated

Reproduction of the original cowl top vent grill panel designed for use with 1969-70 Mustangs. Each vent grill panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: VF0590B

1933-34 Ford Car, 1935-36 Pickup Truck; Cowl Vent Screen

These all steel bug screens feature rigid stamped frames with screens installed. Painted gloss black and ready to mount. Keeps bugs and debris out of your lap!

Product#: 6270848

1967-72 Chevy, GMC Pickup, Blazer, Suburban; Truck Hood To Cowl Seal, Various Models

OER® reproduction hood to cowl seal for 1967-72 Chevrolet and GMC trucks, Suburban models, 1969-72 Blazer, and 1970-72 Jimmy models. Manufactured in the correct factory configuration, this seal helps prevent water, dirt,...

Product#: 153782

1960-66 Chevy, GMC Pickup, Panel, Suburban; Cowl Vent Panel; Smooth Style; without Holes; EDP Coated

Reproduction of the original smooth cowl vent panel for 1960-66 Chevrolet and GMC truck models. Each panel is manufactured in stamped steel to factory specifications and features a smooth grill area, pre-punched mounting...

Product#: 154066

1981-91 Chevy GMC Pickup, Blazer, Jimmy, Suburban; Cowl Vent Top Grill Panel

Reproduction OE style cowl vent panel for 1981-86 Chevrolet and GMC C/K Truck, 1987-91 Chevrolet and GMC R/V Truck, and 1981-91 Blazer, Jimmy, and Suburban models. This panel installs on the exterior of the vehicle between...

Product#: 02228F

1964-65 Ford Falcon/Mercury Comet; Upper Cowl Cover Panel; With Vents

Reproduction cowl top vent grill panel for 1964-65 Ford Falcon and Mercury Comet models. Manufactured to factory specifications featuring correct contours, original style mounting points and EDP coated for rust prevention....

Product#: 153397

1955-59 Chevy, GMC Pickup, Panel, Suburban; Cowl Vent Grill Panel; Smooth Style

Reproduction cowl vent panel for 1955-59 2nd series Chevrolet and GMC truck models. Manufactured to exact factory specifications but designed without the stock vent grille for a smooth, custom appearance. Each panel is...

Product#: C11026

1967-69 Camaro, Firebird, 1968-72 Nova; Inner & Outer Cowl Side Panel; LH; Drivers Side; EDP Coated

Reproduction of the original inner and outer cowl panel designed for use with 1967-69 Camaro and Firebird models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for...

Product#: 153934

1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Lower Inner Cowl Panel; EDP Coating

Reproduction of the original lower cowl panel designed for use with 1967-72 Chevrolet and GMC truck models. Each lower cowl panel is precision stamped in quality steel to factory specifications, featuring correct contours and...

Product#: BP1295Z

1964-67 Chevelle, Malibu, El Camino, Cutlass, GTO, Skylark, LeMans, Tempest; Lower Windshield Channel Dash Repair Panel; Between Windshield and Cowl Panel

Reproduction lower windshield channel dash repair panel for 1964-67 Chevelle, Malibu, El Camino, Cutlass, GTO, Skylark, LeMans, and Tempest models. Manufactured from quality stamped steel to factory specifications, this panel...

Product#: TR02054G1

1967-72 Ford F-Series Truck; Cowl Repair Panel; Lower; RH Passenger Side

Reproduction stamped steel lower cowl repair panel to repair the lower cowl section on 1967-72 Ford truck cabs. This area, just to the side of the firewall is prone to rust and corrosion, when the cowl holds water, leaves,...

Product#: 154706

1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Cowl Side Panel; Inner; RH Passenger Side

Reproduction inner cowl side panel for 1967-72 Chevrolet and GMC pickup, Blazer/Jimmy, and Suburban models. Manufactured in stamped steel to original factory configuration to replace the rusted panel on your vehicle. Comes...

Product#: C2498

1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Upper Cowl Panel; Inner Structure; EDP Coated

Reproduction of the inner portion of the upper cowl panel for 1967-72 Chevrolet and GMC truck models. Each inner cowl panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: TR8102010B

1967-72 Ford F-100, F-250, F-350; Cowl Vent Panel; Upper

Upper cowl vent panel for 1967-72 Ford F-100, F250, F-350 trucks. This is an excellent reproduction of the original stamping of the top vent grill panel located in between the windshield and the rear edge of the hood on the...

Product#: 154705

1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Cowl Side Panel; Inner; LH Driver Side

Reproduction inner cowl side panel for 1967-72 Chevrolet and GMC pickup, Blazer/Jimmy, and Suburban models. Manufactured in stamped steel to original factory configuration to replace the rusted panel on your vehicle. Comes...

Product#: 02011D

1971-73 Mustang, Cougar; Lower Cowl Assembly; without AC; 2-Piece

This is a very common place for rust to form on Mustang and Cougar models. The upper and lower cowl panels are supplied as separate panels that must be spot welded together. This quality 2-piece stamped steel reproduction...

Product#: C11025

1967-69 Camaro, Firebird; Outer and Inner Cowl Side Panel; RH; Passenger Side; EDP Coated

Reproduction of the original inner and outer cowl panel designed for use with 1967-69 Camaro and Firebird models. Each panel is manufactured in stamped steel to original factory specifications, featuring correct contours for...

Product#: 14835

1955-59 Chevy, GMC Pickup, Panel, Suburban; Outer Cowl Panel; RH Passenger Side; EDP Coated

Reproduction of the original outer cowl panel for use with 1955-59 Chevrolet and GMC pickup truck models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: TR02054A

1948-52 Ford F-Series Truck; Full Cowl Side Panel; 32"; Passenger Side

Reproduction full cowl replacement panel for 1948-52 Ford F-Series trucks. This repair panel is 32" tall and extends from the bottom of the cab to the upper door hinge. It is manufactured from high-grade sheet metal and...

Product#: TR02054B

1948-52 Ford F-Series Truck; Full Cowl Side Panel; 32"; Driver Side

Reproduction full cowl replacement panel for 1948-52 Ford F-Series trucks. This repair panel is 32" tall and extends from the bottom of the cab to the upper door hinge. It is manufactured from high-grade sheet metal and...

Product#: MM1770C

1967-76 Dodge; Plymouth; A-Body; Upper Cowl Panel

Reproduction upper cowl panel for 1967-76 Dodge and Plymouth A-Body models. Installs directly below the windshield and behind the hood panel. Manufactured to factory specifications from stamped steel with all correct contours...

Product#: 152757W

1969 Camaro, Firebird; Inner Cowl Panel Assembly; without AC; Weld-Thru™ Primer

Reproduction of the original firewall panel for use with 1969 Camaro and Firebird models without factory air conditioning. A complete reproduction of the inner portion of the cowl top vent section. This quality reproduction...

Product#: 153047

1968-74 Chevy II, Nova, Apollo, Omega, Ventura; Cowl Top Vent Grill Panel; EDP Coating

Reproduction of the original cowl top vent grill panel for use on 1968-74 Chevy II, Nova and GM X body models. Each grill is manufactured in stamped steel to factory specifications featuring correct contours and mounting...

Product#: 153817

1981-91 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Cowl Vent Screen

Reproduction of the original cowl vent screen designed for use on all 1981-86 C/K-Series and 1987-91 R/V-Series Chevrolet and GMC truck models. Manufactured to factory specifications, featuring original style ABS plastic...

Product#: CX1487

1947-55 Chevrolet, GMC Truck; Cowl Top Vent Drain Hose

Reproduction of the original cowl vent drain hose designed for use with 1947-55 Chevrolet and GMC trucks. Each hose is designed to replace the original exactly. Chevrolet Applications: 1954-1955 Chevrolet Pickup Truck (1955...

Product#: 153816

1973-80 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Cowl Vent Screen

Reproduction of the original cowl vent screen designed for all 1973-80 Chevrolet and GMC truck models. Manufactured to factory specifications, featuring original style injection molded ABS plastic material with the correct...

Product#: AP7236B

1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Cowl Vent Trash Guard; Black Mesh; 2 Piece Set

This Cowl Vent Trash Guard for 1967-1972 Chevrolet Trucks is produced in black steel mesh finish. Helps to eliminate rust and decay in the cowl vent caused by trash and leaves which absorb and hold moisture. Simple...

Product#: CX4884

1955-59 Chevrolet, GMC Truck; Cowl / Air Vent Repair Panel; Drivers Side; EDP Coated

Reproduction of the original outer cowl panel designed for use with 1955-59 Chevrolet and GMC truck models. Each lower cab repair panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 4489189

1964-67 Chevelle, El Camino, GTO, Skylark, Cutlass, 442, LeMans, Tempest; Cowl Vent Grill Panel

Reproduction cowl vent grill panel for 1964-67 Chevrolet Chevelle and El Camino, Pontiac GTO, LeMans, Tempest, Buick Skylark, Oldsmobile Cutlass, and 442 models. Manufactured in stamped steel to factory specifications, this...

Product#: 15598706

1981-91 Chevy GMC C/K R/V Pickup, Blazer, Jimmy, Suburban; Upper Cowl Panel Assembly; with Windshield Frame

Reproduction of the original upper cowl panel section with integrated windshield frame for 1981-91 Chevrolet and GMC C/K and R/V Squarebody Pickup, Blazer, Jimmy, and Suburban models. This premium replacement assembly is...

Product#: MM1770A

1966-70 Dodge, Plymouth B-Body; Upper Cowl Panel

Reproduction of the original upper cowl panel for use 1966-70 B-Body models. Installs directly below the windshield and behind the hood panel. Manufactured in stamped steel with all correct contours for an exact fit. Comes...

Product#: *R317

1967-69 Camaro Cowl Vent Panel Fastener Kit

Correct hardware required to install a 1967-69 Camaro cowl vent grill panel. Includes all the necessary hardware.

Product#: 14230

1947-53 Chevy, GMC Pickup, Panel, Suburban; Cowl Vent Panel Assembly

Reproduction cowl vent assembly for 1947-53 Chevrolet and GMC truck models. This high quality replacement cowl vent comes fully assembled and includes the mesh screen, actuating linkage, and lever just like original....

Product#: 153332

1961-64 Impala, Bel Air, Biscayne; Upper Cowl Panel; Silver Weld-Thru Coating

Correct reproduction of the original upper cowl panel designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each upper cowl panel is manufactured in stamped steel to original factory specifications...

Product#: 3761022

1960-66 Chevy, GMC Pickup, Panel, Suburban; Cowl Vent Panel; EDP Coated

Reproduction of the original cowl vent panel designed for use on 1960-66 Chevrolet and GMC truck models. Each panel is precisely manufactured in stamped steel to factory specifications and features the correct vent grille...

Product#: 8800774

1970-81 Camaro, Firebird; Cowl Top Vent Grill Screen; GM Licensed

OER® reproduction of the original cowl top vent grill screen designed for use on 1970-81 Camaro and Firebird models. Manufactured in quality injection molded ABS to factory specifications for a perfect fit. Replaces the...

Product#: 3891661

1967-69 Camaro, Firebird, 1968-74 Chevy II/Nova; Cowl Vent Panel Side Seals.

Replacement cowl vent panel side seals for 1967-69 Camaro, Firebird models and 1968-74 Chevy II/Nova models. These seals glue to the cowl vent panel. They help to protect the interior of the car from water getting inside.

Product#: 85L106

1979-82 Ford Mustang; Cowl Top Vent Grill; Ford Tooling

Reproduction of the original cowl vent grill cover designed for use on 1979-82 Mustang models. This cowl vent grill covers the area between the hood and windshield. Features the original style grill pattern and correct black...

Product#: B1073L

1970-81 Camaro, Firebird; Outer Cowl Side Panel; LH Drivers Side

Reproduction of the original outer cowl side panel for use with 1970-81 Camaro and Firebird models. Each outer cowl side panel is manufactured in stamped steel to original factory specifications featuring correct contours for...

Product#: 02010A

1967-68 Mustang, Cougar; Lower Cowl Panel; EDP Coated

Reproduction of the original lower cowl panel designed for use with 1967-68 Ford Mustang, and Mercury Cougar models. Each cowl panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: M137R

1967-68 Mustang, Cougar; Outer Cowl / Kick Panel; Passenger Side; EDP Coated

Reproduction of the original outer cowl/kick panel designed for use with 1967-68 Ford Mustang and Cougar models. Each outer kick panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 02011A

1964-66 Mustang; Cowl Grill Panel Assembly; EDP Coated

The cowl grill panel assembly is a very common place for rust to form on 1964-66 Mustangs. Produced in heavy gauge stamped steel construction with windshield molding pins in the proper locations. Each assembly includes both...

Product#: CX4890

1947-50 Chevy, GMC Pickup, Panel, Suburban; Inner Cowl Panel; LH Driver Side

Reproduction of the inner cowl side panel for 1947-50 Chevrolet and GMC truck models. Each panel is stamped in quality steel to original factory specifications with correct contours for an authentic appearance and fit....

Product#: G24033

1967-72 Chevrolet/GMC Truck; Cowl Panel Hardware Set; OE Style; 16 Pieces

Reproduction cowl panel hardware set for 1967-72 Chevrolet and GMC truck models. Features original style fasteners with the correct finish and headmarks.

Product#: M136R

1965-68 Mustang/Cougar Inner Cowl Patch Panel, Right Side

Cowl leaks are caused when trapped water rusts the metal around the cowl air intake openings. The best and most permanent way to fix a cowl leak is to replace the rusted areas with this inner cowl patch panel. This panel is...

Product#: 9815236

1968-72 Chevelle, El Camino, Monte Carlo, Skylark; Cutlass, GTO, LeMans, Tempest; Outer Cowl Panel; RH; Replaces GM# 9815236

Reproduction RH outer cowl panel for 1968-72 Chevelle, El Camino, Monte Carlo, Skylark, Cutlass, GTO, LeMans, and Tempest models. Designed to replace the outer cowl section, this panel restores proper fit, structure, and...

Product#: CR1085M

1947-53 Chevrolet and GMC Truck; Cowl Vent Gasket; Molded Rubber

Reproduction molded rubber cowl vent gasket for early 1947-53 models. Features and Benefits: Replaces a worn or missing cowl vent gasket Molded rubber construction

Product#: TF401683

1957 Chevrolet Upper Cowl Panel With Windshield Pinchweld Flange

Reproduction upper cowl panel for 1957 Chevrolet models. This piece installs between the front windshield and the hood. It is welded to the top of the firewall and side cowl panels. Features correct contours, pre-punched...