Classic Industries Restoration Parts and Accessories - Doors

Repair the rusted or damaged door skin with this OEM replacement part. Fits passenger side only. For use with 1963-1964 Chevrolet Biscayne models. EDP coated for protection against corrosion and rust. Note:Fits 2 dr hard top...

Repair the rusted or damaged door skin with this OEM replacement part. Fits driver side only. For use with 1963-1964 Chevrolet Biscayne models. EDP coated for protection against corrosion and rust. Note:Fits 2 dr hard top...

After years of use your doors begin to sag. Replace your door hinge for that factory feel and fit when you open and close your car door.This is a reproduction of your worn out original hinge with correct mounting...

Reproduction "first-design" die-cast outer door handle for 1979-93 Mustang, 1979-86 Mercury Capri and a wide variety of additional Ford and Mercury models. Manufactured in die-cast metal to 1979-84 Ford factory...

Concours style retainer is metal with the plastic roller. Reproduction with high quality fit and function. 6 required for both doors. Order 21952SB6 for a kit of 6.

Fits 1964 - 1966 Mustang. 1 kit will do 1 upper and lower door hinge. 2 kits required per car. Includes the pins, springs, and hinge cams.

Door hinge bushings have been manufactured in brass to match factory specifications. 2 bushings required per hinge. Fits 1964-70 Mustang.

Reproduction latch assembly is constructed of high - quality metal and will attach to the door and grab the door latch striker to hold the driver side door closed. This assembly is an OEM - style replacement piece and will...

After years of use your doors begin to sag. Replace your door hinge for that factory feel and fit when you open and close your car door.This is a reproduction of your worn out original hinge with correct mounting...

After years of use your doors begin to sag. Replace your door hinge for that factory feel and fit when you open and close your car door.This is a reproduction of your worn out original hinge with correct mounting...

After years of use your doors begin to sag. Replace your door hinge for that factory feel and fit when you open and close your car door.This is a reproduction of your worn out original hinge with correct mounting...

Reproduction hinges with correct mounting holes.

This 3 piece control rod set contains the control rods that attach the door lock knob, outside door handle and the door lock to the door latch assembly in a 1967 - 1968 Mustang LH door. Set includes 3 rods only, retainer...

This 3 piece control rod set contains the control rods that attach the door lock knob, outside door handle and the door lock to the door latch assembly in a 1965 - 1966 Mustang LH door. Set includes 3 rods only, retainer...

This 3 piece control rod set contains the control rods that attach the door lock knob, outside door handle and the door lock to the door latch assembly in a 1969 - 1970 Mustang LH door. Set includes 3 rods only, retainer...

Reproduction of the original quarter panel and door frame structure assembly designed for use with 1968 Camaro and Firebird coupe models. Each structured panel is manufactured in stamped steel to original factory...

1971-76 Lower Outer Door Skin: Replace the rusted out outer section of the outer door skin panel with this all new reproduction. Eliminates the need to replace the entire panel and allows the usef to replace the rusted out...

Replacement outer lower door patch panel skin designed for use on 1947-1955 (1st design) Chevrolet and GMC pickup models. If the lower section of your outer door is damaged or rusted, this patch panel may be just what you...

Reproduction of the original outer door skin designed for use with 1966-67 Chevrolet Chevy II and Nova models. Each outer door skin is manufactured in stamped steel to original factory specifications featuring correct...

Reproduction inner door frame for 1969 models. Manufactured to factory specifications, featuring correct contours and pre-installed door hinge mounting points. This part features a black electrophoretically deposited coating...

Reproduction of the original outer door skin designed for use with 1968-72 Chevy II, Nova and GM X-body models. Each outer door skin is manufactured in stamped steel to original factory specifications featuring correct...

Reproduction left hand inner door bottom repair panel for 1955-57 Chevrolet 2 door hardtop or convertible models. This piece replaces the commonly rusted out area of the inner door bottom. Made in the USA. Note: Can be...

Reproduction right hand door skin for 1956 Chevrolet hardtop and convertible models. This skin is die stamped, features the correct contours, pre-cut lock cylinder/door handle holes and includes the top flange. Made in the...

This reproduction door skin is stamped from heavy gauge sheet metal and includes original contours and proper slotting for the door handle and lock. Made in the USA Important: Old skin must be re moved from the door shell,...

A complete original GM door assembly for 1993-02 Firebird models! These are a complete door shell completely ready to install. Simply remove the original components from the existing door and install them on the new door....

Reproduction of the original front door shell assembly designed to replace the old or damaged original for 1977-91 Chevrolet and GMC truck models. Each door shell is manufactured in stamped steel to original factory...

Why replace the entire outer door skin when only the lower portion needs replacing? This outer door lower sheet metal panel replaced the most vulnerable section of the door skin. For use with 1988-98 2 door and extended cab...

Reproduction of the lower rear B-pillar replacement panel for 1967-72 Chevrolet and GMC pickup truck models. The rear lower door B-pillar section is often rusted and in need of replacing. This reproduction pillar repair panel...

Reproduction lower door patch panel for 1981-87 Regal models. Manufactured to factory specifications featuring correct contours.

Reproduction of the original style front door outer lower sheet metal section for use with 1973-91 Chevrolet and GMC Pickup, 1976-91 Blazer, Jimmy and 1973-91 Suburban models. to replace damaged or rusted originals. This...

Reproduction of the original lower outer front door sheet metal section designed to replace the rusted or damaged lower section of the door for use with 1973-86 Chevrolet and GMC pickup, 1976-91 Blazer/Jimmy and 1973-91...

Factory-style replacement right hand door shell for 1955 and 1957 Chevrolet 2 door hardtop models. This is the finest quality door shell on the market. Manufactured in stamped OE gauge steel to factory specifications. Each...

Reproduction of the original complete door shell assembly designed for use on 1972 Chevrolet and GMC Suburban models. This quality reproduction door shell is manufactured to factory specifications in stamped steel replicating...

This fiberglass door shell will enable you to replace your damaged or rusted door with long lasting-durable fiberglass replacements. OEM style hinge and latch mounting pads are reinforced and accept OEM hardware for easy...

Reproduction of the original complete door shell assembly designed for use on 1969-71 Chevrolet Blazer and 1970-71 GMC Jimmy models. This quality reproduction door shell is manufactured to factory specifications in stamped...

Replacement driver side inner lower door patch panel for 1953-56 Ford F-100, F-250, and F-350 pickup trucks. This stamped steel panel will fully replace the inner lower sheet metal on the left hand side door. Panels are EDP...

Reproduction left hand door skin for 1955 and 1957 Chevrolet 2 door sedan models. This skin is die stamped, features the correct contours, pre-cut lock cylinder/door handle holes and includes the top flange. Made in the...

Reproduction of the original complete door shell assembly designed for use on 1972 Chevrolet Blazer and GMC Jimmy models. This quality reproduction door shell is manufactured to factory specifications in stamped steel...

Brand new, all steel, reproduction door shell for 1968-77 Bronco. This is a full replacement door shell, stamped and assembled to meet or exceed factory specitfications fit and appearance. Shells are EDP coated inside and...

Reproduction of the original outer door skin for us with 1960-66 Chevrolet and GMC pickup and Suburban models. Manufactured in quality stamped steel to OE specifications. The door skin replaces the outer sheet metal portion...

Original GM outer door panel for 1993-02 Camaro models. Each panel will replace your damaged panel exactly as original. Note: Shipped double oversize.

Factory-style replacement left hand door shell for 1956 Chevrolet convertible models. This is the finest quality door shell on the market. Manufactured in stamped OE gauge steel to factory specifications. Each shell will...

Replacement right hand door shell for 1955-57 Chevrolet 2 door sedan models. This is a good replacement for the original. Manufactured with quality steel and stamped to factory specifications. Each replacement shell will...

Reproduction of the original door shell for 1947- early 1951 Chevrolet and GMC truck models. This quality, stamped steel product is manufactured to factory specifications to replace your rusted or damaged original. This is...

Reproduction left hand door skin for 1956 Chevrolet hardtop and convertible models. This skin is die stamped and features the correct contours, pre-cut lock cylinder and door handle holes. Made in the USA. Note: Shipped...

Reproduction right hand door skin for 1955 and 1957 Chevrolet hardtop and convertible models. This skin is die stamped, features the correct contours, pre-cut lock cylinder/door handle holes and includes the top flange. ...

Replacement lower inner door bottom sheet metal to replace damaged or rusted originals. Fits all 1973-86 models and 1987-91 Blazer, Jimmy, Suburban crew cab and dually models. This section is welded to the bottom of your...

Reproduction left hand door skin for 1955 and 1957 Chevrolet hardtop and convertible models. This skin is die stamped, features the correct contours, pre-cut lock cylinder/door handle holes and includes the top flange. Made...

Replacement driver side inner lower door patch panel for 1951-52 Ford F1, F2, F3, and F4 pickup trucks. This stamped steel panel will fully replace the inner lower sheet metal on the left hand side door. Panels are EDP coated...

Full replacement sheet metal door skin for 1966-67 Ford Bronco. This is a full replacement door skin, stamped and assembled to meet or exceed factory specitfications fit and appearance. Skins are EDP coated inside and out to...

Reproduction of the original outer door sheet metal designed specifically for use with 1968 Camaro and Firebird models. Replace your outer door sheet metal with the finest quality reproduction panel available. Includes...

Reproduction of the original door shell for 1955-59 Chevrolet and GMC Pickup, Suburban and Panel Truck models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Restore your rusted outer door skins with a precise fitting patch panel. If your panels have rust at the bottom portion of the panel, you may choose to repair only the lower section. The panel includes an offset flange for...

Reproduction of the original complete door shell assembly for use with 1975-81 Chevrolet Camaro models. Each complete door shell is manufactured in stamped steel to original factory specifications featuring correct contours...

Reproduction of the original outer door sheet metal designed specifically for use with 1967 Camaro and Firebird models. Replace your outer door sheet metal with the finest quality reproduction panel available! Each panel is...

This fiberglass door shell will enable you to lighten your load dramatically. OEM style hinge and latch mounting pads are reinforced and accept OEM hardware for easy installation. The inner panel must be trimmed out to gain...

Replacement right hand door shell for 1955 and 1957 Chevrolet 2 door hardtop models. This is a good replacement for the original. Manufactured with quality steel and stamped to factory specifications. Each replacement...

This reproduction door skin is stamped from heavy gauge sheet metal and includes original contours and proper slotting for the door handle and lock. Made in the USA Important: Old skin must be re moved from the door shell,...

Reproduction of the original outer door sheet metal designed specifically for use with 1968 Camaro and Firebird models. Replace your outer door sheet metal with the finest quality reproduction panel available. Includes...

Reproduction of the original door shell designed for use with 1973-79 F100, F150, F250, F350, and 1978-79 Bronco models. Each door sheel is manufactured in quality stamped steel to OE specifications replicating the original...