Classic Industries Restoration Parts and Accessories - Brake Hardware

Kit contains commonly replaced drum brake attaching hardware for two wheels. NOTE: to confirm drum brake size, measure the inside diameter of your brake drums (9" or 10" dia.); and measure the width of your brake shoes (from...

Specially drilled bolt that secures the brake line to the caliper. Includes 2 bolts and 4 washers (gaskets).

1964 - 1970 V8, front or rear, RH. Contains the parts necessary to recondition the self - adjuster mechanism. Kit includes; Adjuster cable, cable guide, adjusting ratchet and spring. One kit required per wheel.

Full premium component kits that are application specific for perfect fit and function.Features:Prevents noise and premature wearEliminates heat and corrosion deteriorationMinimizes drag to improve gas mileageRestores brakes...

Kit contains commonly replaced attaching hardware for two rear drums.

Replacement caliper mounting bolts. Sold as a pair. One pair per caliper required. Applications: 1978-87 Buick Regal 1982-87 Camaro 1988-92 Camaro without 1LE Suspension 1982-87 Firebird 1988-92 Firebird without 1LE...

Don?t struggle with worn out or missing brake hardware during your next brake job. Instead, use the brake hardware set the pros recommend! Forget about trying to remember every little piece you may need to rebuild your...

Disc brake hardware kit for 1978-87 Regal models. Includes inner and outer O-ring bushings, caliper bolt bushings, and pad clips for two calipers. Sold as a set.

4 Piston Caliper Pin for 1967-68 Camaro and Firebird

Reproduction of the 1970 Mustang brake distribution block for use on models with front disc and rear drum brakes. This block will mount to the drivers side rear fender apron. Manufactured to correct specifications using brass...

These brake adjuster hole covers are for 1955-57 Chevy models, a commonly lost piece when replacing your brakes. Replace your missing or rusted brake adjuster hole covers with these reproduction pieces. Made of metal as...

Front drum brake spindle nuts (4), bolts (4), and split washers (4) for use with 1968-69 Mopar B-body models. Replace broken, damaged, or missing hardware with this original reproduction kit. Sold as a set. Applications:...

Original GM gasket. The gasket inserts between the steering knuckle and backing plate. Helps eliminate noise or squeaking when applying the brakes. Sold individually. Applications: 1970-81 Camaro 1970-81 Fir ebird 1971-96...

Tee bolt kit to secure brake backing plate to housing. Required when using Wilwood Brakes. Includes bolts, and aircraft style lock nuts for a complete installation. Made in USA Note: Special order, must be prepaid....

This set is correct for the 1969-72 A/F/X Body single piston banjo bolts with the factory correct 5/8" head. Includes 4 crush washers. IMPORTANT: Make sure to check the size of the banjo bolt. GM used two different bolts:...

Kit contains commonly replaced attaching hardware for two front or rear drums.Applications:1971 Mustang V8, 302 cid, 4 barrel, Front1971 Mustang V8, 351 cid, 428 ci, 429 ci Front1972-73 Mustang 6 cylinder Front1972 Mustang...

Set contains hardware for a brake job in front or rear, for 1 axle only. 2 sets required for complete car. Set includes hold down springs, return springs and miscellaneous hardware. Does not include adjusters. For use on...

Rebuilding your disc brake calipers? Don?t forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

Rebuilding your disc brake calipers? Don?t forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

Don?t struggle with worn out or missing brake hardware during your next brake job. Instead, use the brake hardware set the pros recommend! Forget about trying to remember every little piece you may need to rebuild your...

Rebuilding your disc brake calipers? Don?t forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

Rebuilding or replacing your brakes doesn?t have to be a painful experience. Replace worn out or missing hardware and bring your brakes back to proper working condition.

Wheel cylinder pins for 1967-69 Camaro models.These pins go into both sides of the wheel cylinder and are used to activate the drum shoes. Requires two per wheel cylinder or four per car with disc/drum brakes. Requires 8 per...

Replacement caliper mounting bolts. Sold individually. 2 required per caliper. Applications: 1988 Camaro with 1LE Suspension 1989-97 Camaro 1988 Firebird with 1LE Suspension 1989-97 Firebi rd

Drum Brake Adjusting Screw: Adjusting screws for various passenger car applications.

Drum Brake Adjusting Screw: Adjusting screws for various passenger car applications.

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 Chevrolet, Buick, Oldsmobile and Pontiac models. The backing plate will help to keep brake pad dust from contaminating...

Reproduction of the original style front disc backing plates designed for use with various 1969-74 GM models. Each backing plate is manufactured to OE specifications replicating the original. For use with single piston front...

Don?t struggle with worn out or missing brake hardware during your next brake job. Instead, use the brake hardware set the pros recommend! Forget about trying to remember every little piece you may need to rebuild your...

Replacement caliper mounting bolt. Sold individually. Applications: 1988-92 Camaro with1LE Suspension 1988-92 Firebird with 1LE Suspension

This kit includes the brake shoe adjustment sprocket, brake shoe upper retainer and the adjustment plate. Fits 1964-78 front or rear left hand side

Master cylinder banjo fitting gasket set for 1955-58 Chevy fullsize models. These copper gaskets install at the end of the master cylinder banjo fitting on both side of the brass block. Each set includes 2 copper gaskets.

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Original GM plate used to mount the rear brake calipers. Applications: 1998-02 Camaro without traction control left hand (driver side) rear 1998-02 Firebird without traction control left hand (driver side) rear

Reproduction of the park brake retainer clips that install over the park brake cable end to . hold the cable inside the retainer on the vehicle. These clips are designed to replicate the original in appearance and fit. Set of...

Original type bleeder screws used for bleeding brakes. Set of 4.

This 18-piece hardware set includes the front rotor and spindle nuts, washers, pins necessary to hold the rotor or drum to the spindle, spindle to the upper/lower control arms and the spindle to the end link. For use with...

Reproduction of the original disc brake backing plates for use with various 1967-68 GM models with 4 piston caliper front disc brakes. These backing plates are manufacxtured to replciate the originals in quality and design....

These will work on drop spindles that are using stock steering arms and 10.5" single piston disc brakes. Sold as a pair.

This set is correct for the 1978-81 A/F/X Body single piston banjo bolts with the factory correct 5/8" head. Includes 4 crush washers. IMPORTANT: Make sure to check the size of the banjo bolt. GM used two different bolts:...

Correct reproduction gasket for use with 1967-69 models. The gasket inserts between the steering knuckle (spindle) and brake backing plate. Helps eliminate noise or squeaking when applying the brakes. Fits drum or disc...

Reproduction of the commonly missing 1969 brake hose to upper A-arm attachment strap. Originally installed by GM and often broken or discarded over the years.

Brake adjusting screw for use on all four brakes. Sold as each. Four required.

Rebuild your brake caliper the right way with this caliper seal kit and be sure that you have adequate stopping power when you need it. Produced using materials that meet or exceed OE specifications. Each kit contains all of...

Reproduction of the fluid distribution block for use on 1967-73 Mustangs with disc brakes. This rebuild unit may require some slight modifications to the brake line in order to install depending on the year and model.

Replacement caliper mounting bolts. Sold as a pair. Applications: 1998-02 Camaro 1998-02 Firebird

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Rebuild your brake caliper the right way with this single piston caliper repair set and be sure that you have adequate stopping power when you need it. Produced using materials that meet or exceed OE specifications, each set...

Rebuilding or replacing your brakes doesn?t have to be a painful experience. Replace worn out or missing hardware and bring your brakes back to proper working condition.

Don?t struggle with worn out or missing brake hardware during your next brake job. Instead, use the brake hardware set the pros recommend! Forget about trying to remember every little piece you may need to rebuild your...

Make your truck disc brake compatible with a set of these 2-1/2" drop disc brake spindles. These will enhance your stopping power, steering and handling, and give your truck a better stance. Cast from the highest quality...

This drum brake self-adjuster hardware set includes the necessary pieces to repair/service 1 Left hand (driver side) drum. Will fit front or rear with 9" brakes. Applications: 1969-76 Valiant 1969-76 Dart 1969 Barracuda...

The 2208G speed bleeders fit: - 1968-73 Mustang front disc Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder...

Don?t struggle with worn out or missing brake hardware during your next brake job. Instead, use the brake hardware set the pros recommend! Forget about trying to remember every little piece you may need to rebuild your...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Kit includes; 1 Brake pad pin 2 Caliper mounting bolts 1 Cotter pin One kits is required per caliper.

Disc brake brackets for use on 2-1/2" Modular Drop Spindles on 1960-87 C10 Trucks with 5 x 5" wheels. Note: For use with factory 12" rotors and calipers. Applications: 1960-87 C10 Trucks with 2-1/2" modular drop spindles

Reproduction brake cable tension adjuster flange nut for 1968-69 Mopar B-body models. This flange nut is a direct replacement for oem equipment. Great replacement for rusted or damaged hardware. Sold individually. ...

This drum brake self-adjuster hardware set includes the necessary pieces to repair/service 1 Left hand (driver side) drum. Will fit front or rear with 10" brakes. Applications: A-Body 1969-76 Valiant 1969-76 Dart 1969...