Product#: TF700526

1957-79 Chevrolet; Small Block; Spark Plug Wire Heat Shields; 4 Piece Set

Reproduction spark plug wire heat shields for 1957-70 Chevrolet Full-size passenger cars, 1957-72 Chevrolet trucks, 1957-79 Corvette and 1964-67 Chevy II/Nova. Fits small block Chevrolet engines with stock Ram-Horn style...

Product#: CX1845

1955-72 Chevrolet; Rear Spark Plug Wire Retainer; Small Block; 4 Wire; 283, 327; Each; Various Models

Reproduction rear spark plug wire retainer for various 1955-74 Chevrolet models with small block engines. This 4-wire retainer mounts on the upper rear edge of the block below the heads to keep the spark plug wires separated....

Product#: K0087

1965-76 Chevrolet; Big Block; Spark Plug Wire Retainers; Set of 4

Reproduction spark plug wire retainers for various Big Block Chevrolet applications. Replace missing or broken originals with these OE style retainers, reproduced to match the factory design and quality. This set of four...

Product#: CX1846

1958-72 Chevrolet; Spark Plug Wire Retainer; Side Mount; Small Block; 2 Wire; Each

Reproduction side spark plug wire retainer used on 1958-72 small block engines with ram horn style exhaust. This 2-wire retainer mounts on the side of the block using the heat shield bolt and keeps the spark plug wires...

Product#: CX1847

1958-72 Chevy, GMC; Lower Spark Plug Wire to Oil Pan Retainer Clip; Small Block; Each

Reproduction lower spark plug wire to oil pan retainer clip for various Chevrolet and GMC small block engines with ram horn style exhaust. This 2-wire retainer mounts on the lower side of the block using an oil pan bolt and...

Product#: B69602

Billet Specialties Polished Billet Aluminum 2-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: EN1080S

1967-76 Buick Skylark; Retainer; Spark Plug wire; 3 Wire; Push-on; Stud Mount; Each

Reproduction spark plug 3 wire retainer/holder for 1967-76 Buick Skylark models. The spark plug wire retainer is made of black injection molded plastic and is for applications with valve cover stud mounted push-on style...

Product#: K0071

1967-72 Chevrolet; Spark Plug Wire Retainer Set; Small Block

Reproduction of the original spark plug wire retainers designed for use with various 1967-72 Chevrolet models with small block engines as listed. Replace your original missing or broken spark plug wire retainers with this OE...

Product#: 8843

MSD; Spark Plug Wire Separator Set

The MSD Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each Separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has...

Product#: B69601

Billet Specialties Polished Billet Aluminum 4-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: KW972

1955-70 Chevy; Valve Cover Wire Retainers; Small Block; 2 Slot Plug; 4 Piece Set

Quality reproduction of the original two slot plug wire retainer designed for use with various Chevrolet models prior to 1969. This authentic reproduction includes 4 retainers featuring the stamped letters "AR" as original,...

Product#: D141636

Chevrolet Small Block / Big Block Bow Tie Plug Wire Retainer Set

These unique factory wire retainers include the red Bow Tie emblem along with the word Chevrolet molded onto the black nylon head of each wire loom. The head is mounted on a high polished chrome stem. Get a custom look with...

Product#: AB60713

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Polished Finish

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: AB60714

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Silverline Series

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: AB60711

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Black Anodized Finish

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: AB60712

Universal Billet Spark Plug Wire Loom; 8 & 8.5mm; Machined Finish

Dress up your engine bay with these billet spark plug wire looms! Machined from 6061-T aluminum, these looms fit 8 & 8.5mm wires. These looms include adjustable brackets and hardware. Sold in pars.

Product#: T4009

Chrome 4 Hole 3-3/4" Standard Lift Wire Looms

Beautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation. Sold as a pair.

Product#: B69704

Billet Specialties Polished Billet Aluminum 4-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69784

Billet Specialties Black Anodized Billet Aluminum 4-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69684

Billet Specialties Black Anodized Billet Aluminum 4-Wire Head Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69782

Billet Specialties Black Anodized Billet Aluminum 2-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B68702

Billet Specialties Polished Billet Aluminum 2-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B68701

Billet Specialties Polished Billet Aluminum 1-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69604

Billet Specialties Polished Billet Aluminum 4-Wire Head Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69682

Billet Specialties Black Anodized Billet Aluminum 2-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69781

Billet Specialties Black Anodized Billet Aluminum 1-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69681

Billet Specialties Black Anodized Billet Aluminum 4-Wire Floating Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B69783

Billet Specialties Black Anodized Billet Aluminum 3-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: B68703

Billet Specialties Polished Billet Aluminum 3-Wire Valve Cover Mount Ignition Wire Separators

Billet Specialties polished or black anodized billet aluminum 8.5mm wire separators. They are available in one, two, three, and four wire configurations and feature snap-in wire retention for easy service and installation....

Product#: T9097

Chrome 4 Hole 5-1/4" High Lift Wire Looms - Pair

Beautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation. Sold as a pair.

Product#: D141638

1955-86 Chevrolet Small Block Linear Wire Loom with Bow Tie

Using the valve cover mounting bolts, these handsome chrome plated looms are positioned along the valve cover to hold the wires in a neat parallel arrangement. The epoxy coated BowTie emblem is centrally located for maximum...

Product#: MS72133

Moroso Spark Plug Wire Loom Kit For 7-9mm Wire - Black

Moroso's wire loom kits feature triple chrome plated brackets with high-temperature plastic separators keep plug wires away from exhaust manifolds, headers and prevents ignition crossfire. They will accommodate wires from...

Product#: 141714-BCHW

"Chevrolet & Bowtie Emblem" Linear Wire Looms, Chevy S/B V8 1959-86, 2 Per Package, Black Crinkle.

This spark plug wire loom set is a linear style made for 7mm-8mm wires. They mount to the engine valve covers and are designed to fit 1959 to 1986 Small Block Chevy engines. Features a great looking, durable black crinkle...

Product#: 141709-BCHW

Chevy Bowtie Wirelooms, Black Crinkle

Chevrolet Performance Black Crinkle Wire Looms are positioned along the valve cover to hold the wires (up to 8mm) in a neat parallel arrangement, using the existing valve cover mounting bolts, the epoxy-coated Black Bowtie...

Product#: 12297A

1960-79 Ford; Spark Plug Wire Mounted Separator 7mm/8mm; V8; Block Shaped; Each

Reproduction of the original spark plug wire separator for use on various 1960-79 Ford models as listed below. This block-shaped ignition wire separator has spaces to hold ignition wires and attaches to the vertical steel...

Product#: E294

1967 Camaro, Impala, Nova, Truck; Spark Plug Wire Holder Stand; Small Block; LH

Reproduction of the original spark plug wire holder designed for use with This 1967 spark plug wire retainer stand replicating the original design for authenticity. This wire holder stand was specifically designed to used on...

Product#: D141639

1965-91 Chevrolet Big Block Linear Wire Loom with Bow Tie

Using the valve cover mounting bolts, these handsome chrome plated looms are positioned along the valve cover to hold the wires in a neat parallel arrangement. The epoxy coated BowTie emblem is centrally located for maximum...

Product#: 12297H

1975-95 Ford Mustang, 1977-78 Mustang II; Spark Plug Wire Mounted Separator 9mm; Small Block; Each

Reproduction of the original spark plug wire separator for use on various 1975-95 Ford models as listed below. This block-shaped ignition wire separator has spaces to hold 4 ignition wires and includes grooves for mounting on...

Product#: C702

1967-68 Camaro Spark Plug Wire Support

Product#: MS72130

Moroso Spark Plug Wire Loom Kit For 7-9mm Wire - Blue

Moroso's wire loom kits feature triple chrome plated brackets with high-temperature plastic separators keep plug wires away from exhaust manifolds, headers and prevents ignition crossfire. They will accommodate wires from...

Product#: EN1799S

1967-76 Buick Skylark; Retainer; Spark Plug wire; 4 Wire; Push-on; Stud Mount; Each

Reproduction spark plug 4 wire retainer/holder for 1967-76 Buick Skylark models. The spark plug wire retainer is made of black injection molded plastic and is for applications with valve cover stud mounted push-on style...

Product#: MS72131

Moroso Spark Plug Wire Loom Kit For 7-9mm Wire - Red

Moroso's wire loom kits feature triple chrome plated brackets with high-temperature plastic separators keep plug wires away from exhaust manifolds, headers and prevents ignition crossfire. They will accommodate wires from...

Product#: MP6466

1966-72 Dodge Charger, Dart; 1966-72 Plymouth Barracuda, Valiant; Valve Cover Wire Loom; Small Block

Excellent reproduction of the right valve cover wire loom tab used on small block applications for all Dodge and Plymouth vehicles such as Charger, Dart, Barracuda and Valiant. Formed from correct gauge steel with all the...

Product#: K0118

1969-71 Chevrolet; Spark Plug Wire Retainer; Small Block; Front; LH Drivers Side

Reproduction of the original spark plug wire retainer designed for use with various 1969-71 Chevrolet models with small block engines. Each retainer is manufactured to correct factory dimensions replicating the original...

Product#: K0165

1966-72 Chevrolet; Spark Plug Wire Retainer; Small Block & Big Block; Various Models

Reproduction of the original spark plug wire retainer designed for use with various 1969-70 Chevrolet small block or big block models. Each retainer is manufactured to correct factory specifications featuring the correct "L"...

Product#: K0141

1968-70 Chevrolet; Spark Plug Wire Retainer; Big Block; RH 2nd Bolt Hole

Reproduction of the original spark plug wire retainer designed for use with various 1968-70 Chevrolet models as listed. Each retainer is manufactured to correct factory specifications replicating the original in design and...

Product#: CX5040

216 / 235 6 Cyl Spark Plug Wire Looms

Reproduction of the chrome spark plug wire looms used on Chevrolet models that have a 216 or 235 6 cylinder engine with center bolt valve covers.

Product#: PY126

1975-79 Firebird Spark Plug Wire Retainers-Hei

Reproduction spark plug wire retainers for 1975-79 Firebird models with HEI.

Product#: PY124

1968-69 Firebird Spark Plug Wire Retainers-Without A/C

Reproduction spark plug wire retainers for 1968-69 Firebird models without A/C.

Product#: PY124A

1968-69 Firebird Spark Plug Wire Retainers-With A/C

Reproduction spark plug wire retainers for 1968-69 Firebird models with A/C.

Product#: PY123

1967 Firebird Spark Plug Wire Retainers-Without A/C

Reproduction spark plug wire retainers for 1967 Firebird models without A/C.

Product#: PY123A

1967 Firebird Spark Plug Wire Retainers-With A/C

Reproduction spark plug wire retainers for 1967 Firebird models with A/C.

Product#: PY470F

1970 Firebird Spark Plug Wire Retainers-All

Reproduction spark plug wire retainers for all 1970 Firebird models.