1968-74 Firebird, Trans-Am; Intake Vacuum Fitting
Reproduction of the original intake vacuum fitting for use with various 1968-74 Pontiac models including Firebird and Trans Am. This vacuum fitting mounts on the intake manifold on runner # 1. This will provide a strong...
1955-72 Chevrolet; Intake Manifold Oil Splash Shield
Reproduction oil splash shield for DZ 302, 327, 350, and LT1 aluminum Winters intake manifold. that mounts under aluminum intake manifold with casting # 3917610, 3972110, 3932472, 3972116, 3890490, and 3844461. Manufactured...
1955-86 Small Block Chevrolet; Edelbrock Intake Gasket Set
These gaskets are matched to Edelbrock Performer, Performer RPM and Victor Jr. cylinder heads and manifolds and designed to optimize performance and flow. New micropore synthetic fiber composite construction makes these...
1955-1987 Chevrolet "Bow Tie" Intake Manifold Bolt Set; Small Block; Stainless Steel;
Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo. For use with all small block engines from 1955 through 1987. Includes a set...
1955-1987 Chevrolet "Bow Tie" Intake Manifold Bolt Set; Small Block; Stainless Steel;
Classic $31.99 set
1958-65 Chevrolet 348/409 "W" Series Intake Manifold Bolt Set
Designed specifically for Edelbrock manifolds, this bolt set features reduced hex heads for easy wrench access. Features include cadmium finished steel bolt and hardened washers. Made in the U.S.A. Note: No further discounts...
1986-87 Buick Regal; EGR Delete Plate and Mounting Hardware Kit
For the serious racer that wants to eliminate the EGR system, this is the part you will need to block off the EGR valve on the stock intake. The delete (block-off) plate is made in billet aluminum with a finned top surface....
LS1 Intake EGR Billet Aluminum Block-Off plate for LS1 intake manifold, finally a solution to remove your unwanted EGR from your 1998-2000 LS1, for use in conjunction with exhaust EGR delete plate. Made in the USA!
1998-2000 Camaro, Firebird LS1; Exhaust Block-Off Plate; Billet Aluminum; Black Anodized Finish; w/Hardware
Classic $26.99 ea
1998-2000 Camaro, Firebird LS1; Exhaust Block-Off Plate; with Natural Anodized Finish; w/Hardware
LS1 Intake EGR Billet Aluminum Block-Off plate for LS1 intake manifold, finally a solution to remove your unwanted EGR from your 1998-2000 LS1, for use in conjunction with exhaust EGR delete plate. Made in the USA!
1998-2000 Camaro, Firebird LS1; Exhaust Block-Off Plate; with Natural Anodized Finish; w/Hardware
Classic $26.99 ea
Chevrolet Small Block Vortec Black Oxide Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Vortec Black Oxide Hex Head Intake Manifold Bolt Set
Classic $18.99 set
Reproduction of the original style intake manifold bolts designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and Full Size models. These intake manifold bolts are necessary for a detailed restoration. Each set...
1958-64 Chevrolet Impala, Bel Air; Intake Manifold Bolt Set; w/Correct AP Head Markings; 12 Piece Set
Classic $19.99 set
1959-86 Chevrolet Small Block Chrome Plated "Bow Tie" Intake Manifold Bolt Set
Add a unique custom touch with a set of these stylish intake manifold bolts. Each chrome plated bolt is emblazoned with the Bow Tie logo.
1959-86 Chevrolet Small Block Chrome Plated "Bow Tie" Intake Manifold Bolt Set
Classic $38.99 set
Chevrolet Big Block Thru-87 Chrome "Bow Tie" Intake Manifold Bolt Set
Add a unique custom touch with a set of these stylish intake manifold bolts. Each chrome plated bolt is emblazoned with the Bow Tie logo.
Chevrolet Big Block Thru-87 Chrome "Bow Tie" Intake Manifold Bolt Set
Classic $51.99 set
Chevrolet Small Block Vortec Black Oxide 12 Point Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Vortec Black Oxide 12 Point Head Intake Manifold Bolt Set
Classic $19.99 set
Chevrolet 265-400 Small Block Stainless Steel 12 Point Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet 265-400 Small Block Stainless Steel 12 Point Head Intake Manifold Bolt Set
Classic $35.99 set
Chevrolet 265-400 Small Block Stainless Steel Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet 265-400 Small Block Stainless Steel Hex Head Intake Manifold Bolt Set
Classic $33.99 set
1998-02 Firebird Trans Am; WS6 LS1 Lower Tall Ram Air Box
Reproduction of the original ram air base installed on 1998-2002 Pontiac Trans Am, Ram Air model. This box can only be used with the Ram Air style hood. Each box is manufactured to correct factory specifications, but taller....
1955 Chevy Bel Air, 150, 210, Nomad; Intake Manifold Gasket Set; with Block-Off Plate; Single 4 bbl
Reproduction of the original intake manifold gaskets designed for use with 1955 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Nomad models. This set includes correct gaskets for use with single 4 bbl carburetors....
1955 Chevy Bel Air, 150, 210, Nomad; Intake Manifold Gasket Set; with Block-Off Plate; Single 4 bbl
Classic $44.99 set
1955-1982 Stainless Steel Washer Set; Small Block; for Aluminum Intake Manifolds;12 piece
1956-1982 aluminum intake manifold stainless steel washer set for small block engines. Though not originally so equipped, these special washers are very helpful in protecting the aluminum which is directly in contact with...
1955-1982 Stainless Steel Washer Set; Small Block; for Aluminum Intake Manifolds;12 piece
Classic $11.99 set
1965-90 Chevrolet; Aluminum Intake Manifold Bolt Set; Big Block; with "A" Headmark
Reproduction intake manifold bolt for various 1965-90 Chevrolet big block (396, 402, 427, 454) models. Each bolt is manufactured to correct factory specifications and features the correct "A" head marking for 1965-72 models....
1965-90 Chevrolet; Aluminum Intake Manifold Bolt Set; Big Block; with "A" Headmark
Classic $36.99 set
Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Stainless Steel
These reproduction bolts go one step further than the original style. They are produced in polished stainless steel. Set includes 12 bolts and 12 washers.
Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Stainless Steel
Classic $58.99 set
Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Chrome
These reproduction bolts go one step further than the original style. They are produced in polished chrome. Set includes 12 bolts and 12 washers.
Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Chrome
Classic $33.99 set
Chevrolet Small Block Polished Chrome Allen Head Intake Manifold Bolt Set
These reproduction bolts go one step further than the original style. They are produced in polished chrome. Set includes 12 bolts and 12 washers.
Chevrolet Small Block Polished Chrome Allen Head Intake Manifold Bolt Set
Classic $26.99 set
1955-72 Chevrolet; Intake Manifold Bolt Set; "M" Marking; Small Block; 12 Piece
Reproduction of the original intake manifold bolts designed for use with all 1955-72 Chevrolet models with small block engines. Each bolt is manufactured to correct factory specifications and features the correct "M" head...
1955-72 Chevrolet; Intake Manifold Bolt Set; "M" Marking; Small Block; 12 Piece
Classic $18.99 set
Chevrolet Big Block 396-454 Black Oxide 12 Point Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Big Block 396-454 Black Oxide 12 Point Head Intake Manifold Bolt Set
Classic $31.99 set
Chevrolet 265-400 Small Block Black Oxide 12 Point Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet 265-400 Small Block Black Oxide 12 Point Head Intake Manifold Bolt Set
Classic $29.99 set
1957-58 Chevrolet Intake Manifold And Fuel Injection Gasket Set
Reproduction intake manifold gaskets for 1958 Chevrolet passenger car models.
1982-87 Buick Regal; 3.8L Turbo V6; Billet Aluminum Idle Air Control Angle Adapter
Cruz Performance billet aluminum IAC angle adapter for 1982-87 Buick 3.8L Turbo models including Grand National, T-Type and GNX. This adapter changes the mounting angle of the idle air control valve (IAC) for additional...
1982-87 Buick Regal; 3.8L Turbo V6; Billet Aluminum Idle Air Control Angle Adapter
Classic $397.99 ea
Mopar 273-440 Wedge Black Oxide With Hexhead Arp® Intake Manifold Bolt Set
Prevent intake manifold leaks with these quality fasteners from ARP®. Wide underhead flanges and companion washers provide even load distribution while precision-rolled threads prevent galling and promote consistent...
Mopar 273-440 Wedge Black Oxide With Hexhead Arp® Intake Manifold Bolt Set
Classic $33.99 set
1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Brushed Finish
This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...
1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Brushed Finish
Classic $72.99 ea
1955-64 Passenger Intake Manifold Washers Stainless Steel
Intake manifold washer set for 1958-64 Chevrolet passenger car small block models with aluminum intake manifolds. Stainless steel is needed to keep the bolts from marring. Washers are not visible after installation.
Chevrolet Small Block Tuned Port Injected Stainless Steel 12 Point Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Tuned Port Injected Stainless Steel 12 Point Head Intake Manifold Bolt Set
Classic $125.99 set
2005-09 Ford Mustang GT; Plenum Cover to Throttle Body Stud; w/Nuts; Pair
Looking to install an intake manifold cover? If your 2005-2009 Mustang GT is missing the factory intake manifold cover, you'll need this pair of studs to install one. These studs replace the top two mounting bolts for the...
2005-09 Ford Mustang GT; Plenum Cover to Throttle Body Stud; w/Nuts; Pair
Classic $21.99 pr
Chevrolet Small Block Vortec Stainless Steel 12 Point Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Vortec Stainless Steel 12 Point Intake Manifold Bolt Set
Classic $27.99 set
Chevrolet Big Block 396-454 Stainless Steel 12 Point Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Big Block 396-454 Stainless Steel 12 Point Head Intake Manifold Bolt Set
Classic $53.99 set
For use with Performer manifold # E3711 & E7111 Note: Discount exempt.
Chevrolet Big Block Thru-87 Stainless Steel "Bow Tie" Intake Manifold Bolt Set
Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo.
Chevrolet Big Block Thru-87 Stainless Steel "Bow Tie" Intake Manifold Bolt Set
Classic $43.99 set
Chevrolet 396-454 Big Block Black Oxide Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet 396-454 Big Block Black Oxide Hex Head Intake Manifold Bolt Set
Classic $26.99 set
1973-74 Pontiac Trans-Am; Super Duty Valley Pan Plug
Trans Am Super Duty valley pan plug. This black plug is required to close-off the hole in the valley pan of Trans Am Super Duty engines.
1996-2003 GM/GMC Small Block Intake Manifold Bolt Kit
This Edelbrock intake manifold bolt kit is designed specifically for small-block Chevy V8s with E-tec or Vortec heads when using an Edelbrock manifold. This bolt kit features 12-point heads for easy wrench access. Features...
Chevrolet 502 Big Block Black Oxide Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet 502 Big Block Black Oxide Hex Head Intake Manifold Bolt Set
Classic $37.99 set
1957-60 Chevrolet Bel Air, Impala; Intake Manifold & Carburetor Gasket Set; with Single 4 bbl.
Reproduction of the original intake manifold gaskets designed for use with 1958-60 Chevrolet passenger car models as listed below. Kit includes a complete set of intake manifold and carburetor gaskets.
1957-60 Chevrolet Bel Air, Impala; Intake Manifold & Carburetor Gasket Set; with Single 4 bbl.
Classic $49.99 set
Chevrolet Big Block 396-454 Stainless Steel Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Big Block 396-454 Stainless Steel Hex Head Intake Manifold Bolt Set
Classic $48.99 set
Pontiac Intake Manifold Bolt Set
For use with Performer manifold #'s E2156, E3756 & e7156. Note: Discount exempt.
1970-72 Pontiac Firebird; Ram Air IV/HO Intake Bolt Set
Correct bolt set for aluminum intake manifolds installed on 1970-72 Pontiac Ram Air IV and HO models. This set contains the correct style hardware with factory markings for mounting the intake manifold the cast iron crossover...
1977-79 Pontiac Trans Am; Oldsmobile 403; Intake Manifold Plug Set; 4 Pieces
Reproduction intake manifold plugs for 1977-79 Trans Am with 403ci Oldsmobile engine.
1977-79 Pontiac Trans Am; Oldsmobile 403; Intake Manifold Plug Set; 4 Pieces
Classic $11.99 set
1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Polished Finish
This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA
1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Polished Finish
Classic $126.99 ea
1987-92 GM Performance Intake Manifold Gaskets 305/350
Why mess with aftermarket intake manifold gaskets while these originals are still available? Fits 1987-92 Chevrolet 305 and 350 small block engines. Use the name you trust.
1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Polished Finish
This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA
1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Polished Finish
Classic $126.99 ea
1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Polished Finish
This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...
1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Polished Finish
Classic $126.99 ea
1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Brushed Finish
This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA
1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Brushed Finish
Classic $72.99 ea
Chevrolet 265-400 Small Block Black Oxide Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet 265-400 Small Block Black Oxide Hex Head Intake Manifold Bolt Set
Classic $19.99 set
Chevrolet Small Block Tuned Port Injected Stainless Steel Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Tuned Port Injected Stainless Steel Hex Head Intake Manifold Bolt Set
Classic $118.99 set
1955-56 Chevrolet Intake Manifold Fitting - 5/8"
Reproduction intake manifold fitting for 1955-56 Chevrolet passenger car models.
Chevrolet Small Block Tuned Port Injected Black Oxide 12 Pointed Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Tuned Port Injected Black Oxide 12 Pointed Head Intake Manifold Bolt Set
Classic $94.99 set
1957 Chevrolet Intake Manifold Fitting - 5/8"
Reproduction intake manifold fitting for 1957 Chevrolet passenger car models.
Chevrolet Small Block Tuned Port Injected Black Oxide Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Tuned Port Injected Black Oxide Hex Head Intake Manifold Bolt Set
Classic $83.99 set
1950-1962 Chevrolet; Intake Manifold Alignment Sleeves
Replace worn, bent, or missing intake manifold sleeves with these quality reproduction sleeves for Chevrolet cars and trucks. Designed to help maintain a proper manifold seal, these sleeves aid in preventing intake leaks and...
Chevrolet Small Block Vortec Stainless Steel Hex Head Intake Manifold Bolt Set
Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...
Chevrolet Small Block Vortec Stainless Steel Hex Head Intake Manifold Bolt Set
Classic $31.99 set
1934-1959 Chevrolet; Intake Manifold Alignment Sleeves
Replace worn, bent, or missing intake manifold sleeves with these quality reproduction sleeves for Chevrolet cars and trucks, as well as GMC six-cylinder engines equipped with small-port cylinder heads. Designed to help...
1956-61 Chevrolet Bel Air, Intake Manifold And Carburetor Gasket Set; Dual 4 bbl.
Reproduction of the original intake manifold gaskets designed for use with 1958-61 Chevrolet Bel Air, Two-Ten Series, One-Fifty Series, Impala, Biscayne, and Fill Size Chevrolet models as listed below with dual 4 bbl.
1956-61 Chevrolet Bel Air, Intake Manifold And Carburetor Gasket Set; Dual 4 bbl.
Classic $57.99 set