Product#: P4286825

1966-71 Mopar Big Block (Except Hemi) Intake Manifold Gasket/Heat Block Off

Mopar Performance intake gasket with built in heat block off. The block off plate prevents heat from being transfered from the hot oil in the lifter valley to the intake manifold, creating a cooler, denser air charge....

Product#: AK122A

Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Chrome

These reproduction bolts go one step further than the original style. They are produced in polished chrome. Set includes 12 bolts and 12 washers.

Product#: 20574

Manifold Coolant Stop Leak

1995-2003 GM vehicles with 3.8L series 2 engines (vin K - RPO L36) have been experiencing excessive coolant consumption or coolant leakage near or under the throttle body and intake manifold. This is caused when the EGR tube...

Product#: AK121B

Chevrolet Big Block; Hex Head Intake Manifold Bolt Set; Polished Stainless Steel

These reproduction bolts go one step further than the original style. They are produced in polished stainless steel. Set includes 16 bolts and 16 washers.

Product#: G0105

1987-92 GM Performance Intake Manifold Gaskets 305/350

Why mess with aftermarket intake manifold gaskets while these originals are still available? Fits 1987-92 Chevrolet 305 and 350 small block engines. Use the name you trust.

Product#: AK122B

Chevrolet Small Block; Hex Head Intake Manifold Bolt Set; Polished Stainless Steel

These reproduction bolts go one step further than the original style. They are produced in polished stainless steel. Set includes 12 bolts and 12 washers.

Product#: E7201

1955-86 Small Block Chevrolet; Edelbrock Intake Gasket Set

These gaskets are matched to Edelbrock Performer, Performer RPM and Victor Jr. cylinder heads and manifolds and designed to optimize performance and flow. New micropore synthetic fiber composite construction makes these...

Product#: 66351

Chevrolet Small Block Polished Chrome Allen Head Intake Manifold Bolt Set

These reproduction bolts go one step further than the original style. They are produced in polished chrome. Set includes 12 bolts and 12 washers.

Product#: 154215

1955-1982 Stainless Steel Washer Set; Small Block; for Aluminum Intake Manifolds;12 piece

1956-1982 aluminum intake manifold stainless steel washer set for small block engines. Though not originally so equipped, these special washers are very helpful in protecting the aluminum which is directly in contact with...

Product#: 56479SD

Chevrolet Big Block Thru-87 Stainless Steel "Bow Tie" Intake Manifold Bolt Set

Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo.

Product#: AK121A

Chevrolet Big Block; Hex Head Intake Manifold Bolt Set; Polished Chrome

These reproduction bolts go one step further than the original style. They are produced in polished chrome. Set includes 16 bolts and 16 washers.

Product#: 56469SD

1955-1987 Chevrolet "Bow Tie" Intake Manifold Bolt Set; Small Block; Stainless Steel;

Add a unique custom touch with a set of these stylish intake manifold bolts. Each polished stainless steel bolt is emblazoned with the Bow Tie logo. For use with all small block engines from 1955 through 1987. Includes a set...

Product#: 56469CD

1959-86 Chevrolet Small Block Chrome Plated "Bow Tie" Intake Manifold Bolt Set

Add a unique custom touch with a set of these stylish intake manifold bolts. Each chrome plated bolt is emblazoned with the Bow Tie logo.

Product#: AR13421

Chevrolet 265-400 Small Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13422

Chevrolet Small Block Vortec Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR34211

Chevrolet 265-400 Small Block Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13511

Chevrolet Big Block 396-454 Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43521

Chevrolet Big Block 396-454 Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43412

Chevrolet Small Block Vortec Stainless Steel 12 Point Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: 109999

Intake Manifold Heat Plate; GM 6 Cylinder 194/230/250/292

Installing aftermarket exhaust manifolds or headers on 194, 230, 250 & 292 ci 6-cylinder GM engines requires an intake manifold heating system for proper performance. The original intake and exhaust manifolds were connected...

Product#: AR13521

Chevrolet 396-454 Big Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR44211

Chevrolet 265-400 Small Block Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43421

Chevrolet 265-400 Small Block Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13413

Chevrolet Small Block Vortec Black Oxide 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43422

Chevrolet Small Block Vortec Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13424

Chevrolet Small Block Tuned Port Injected Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13414

Chevrolet Small Block Tuned Port Injected Black Oxide 12 Pointed Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR43424

Chevrolet Small Block Tuned Port Injected Stainless Steel Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: AR13522

Chevrolet 502 Big Block Black Oxide Hex Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: K0079

1955-72 Chevrolet; Intake Manifold Bolt Set; "M" Marking; Small Block; 12 Piece

Reproduction of the original intake manifold bolts designed for use with all 1955-72 Chevrolet models with small block engines. Each bolt is manufactured to correct factory specifications and features the correct "M" head...

Product#: AR43414

Chevrolet Small Block Tuned Port Injected Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: K0117

1965-90 Chevrolet; Aluminum Intake Manifold Bolt Set; Big Block; with "A" Headmark

Reproduction intake manifold bolt for various 1965-90 Chevrolet big block (396, 402, 427, 454) models. Each bolt is manufactured to correct factory specifications and features the correct "A" head marking for 1965-72 models....

Product#: AR43511

Chevrolet Big Block 396-454 Stainless Steel 12 Point Head Intake Manifold Bolt Set

Prevent intake manifold leaks with ARP's (Automotive Racing Products) quality fasteners. Super strong and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load...

Product#: 109998

235 Stovebolt Intake Manifold Heat Plate (Oval Mounting Holes)

Installing aftermarket exhaust manifolds or headers on 235 ci 6-cylinder engines requires an intake manifold heating system for proper performance. The original intake and exhaust manifolds were connected with a heat riser...

Product#: TF800158

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: TF800160

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: TF800159

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: TF800161

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: TF800163

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: TF800162

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: 3758369

1955-72 Chevrolet; Intake Manifold Oil Splash Shield

Reproduction oil splash shield for DZ 302, 327, 350, and LT1 aluminum Winters intake manifold. that mounts under aluminum intake manifold with casting # 3917610, 3972110, 3932472, 3972116, 3890490, and 3844461. Manufactured...

Product#: B95059

Billet Specialties Aluminum Valley Pan - Bare Machined

Billet Specialties raw machined aluminum valley cover for Gen IV LS Engines. Precision Machined from 6061-T6 Billet Aluminum to fit with the OEM LS gasket for a leak free seal. Stainless fasteners included. Made in the USA.

Product#: B95059B

Billet Specialties Aluminum Valley Pan - Black Anodized

Billet Specialties black anodized aluminum valley cover for Gen IV LS Engines. Precision Machined from 6061-T6 Billet Aluminum to fit with the OEM LS gasket for a leak free seal. Stainless fasteners included. Made in the USA.

Product#: 56479CD

Chevrolet Big Block Thru-87 Chrome "Bow Tie" Intake Manifold Bolt Set

Add a unique custom touch with a set of these stylish intake manifold bolts. Each chrome plated bolt is emblazoned with the Bow Tie logo.

Product#: K0038

1965-72 Various GM Vehicles; Cast Iron Intake Manifold Bolt Set; 16 Piece Set

1965-72 Chevrolet/GMC big block cast iron intake manifold bolts set of 16 pieces.

Product#: G5463K

1969-72 Impala; Camaro; Nova; Truck; Chevelle; and other GM; BB Intake Manifold Hardware Set; "M" Headmarks; For Cast Iron Intake Manifolds; (14) Bolts, (2) Studs. 16 Pieces

Reproduction intake manifold mounting hardware set for various 1969-72 Chevrolet models with a big block engine. This high quality hardware set features original style fasteners with the correct black phosphate & oil finish...

Product#: AJ5317

Fenton Intake Manifold Heater

The Fenton intake manifold heater set directs heat to the intake manifold for better fuel atomization. This reduces excessive richness, rough idle, and poor throttle response, particularly at idle or in cold climates, making...

Product#: G5453K

1966-68 Impala; Chevelle; 1967-68 Camaro; and other GM; BB Intake Manifold Hardware Set; "M" Headmarks; For Cast Iron Intake Manifolds; 16 Pieces

Reproduction intake manifold mounting hardware set for various 1966-68 Chevrolet models with a big block engine. This high quality hardware set features original style fasteners with the correct black phosphate & oil finish...

Product#: G6610K

1966-68 Impala; Chevelle; 1967-68 Camaro; and other GM; BB Intake Manifold Hardware Set; "FP" Headmarks; For Cast Iron Intake Manifolds; 16 Pieces

Reproduction intake manifold mounting hardware set for various 1966-68 Chevrolet models with a big block engine. This high quality hardware set features original style fasteners with the correct black phosphate & oil finish...

Product#: E8509

1958-65 Chevrolet 348/409 "W" Series Intake Manifold Bolt Set

Designed specifically for Edelbrock manifolds, this bolt set features reduced hex heads for easy wrench access. Features include cadmium finished steel bolt and hardened washers. Made in the U.S.A. Note: No further discounts...

Product#: A6700105

1958-64 Chevrolet Impala, Bel Air; Intake Manifold Bolt Set; w/Correct AP Head Markings; 12 Piece Set

Reproduction of the original style intake manifold bolts designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and Full Size models. These intake manifold bolts are necessary for a detailed restoration. Each set...

Product#: 109216

1937-1952 Chevrolet; 216 ci Intake Manifold Heat Plate, (Round Mounting Holes)

Installing aftermarket exhaust manifolds or headers on 216 ci 6-cylinder engines requires an intake manifold heating system for proper performance. The original intake and exhaust manifolds were connected with a heat riser...

Product#: TF700554

1955-64 Passenger Intake Manifold Washers Stainless Steel

Intake manifold washer set for 1958-64 Chevrolet passenger car small block models with aluminum intake manifolds. Stainless steel is needed to keep the bolts from marring. Washers are not visible after installation.

Product#: E7276

Mopar 318 / 340 / 360 Edelbrock Intake Manifold Gaskets

Matched to Edelbrock Performer, Performer RPM cylinder heads and manifolds, Edelbrock intake gaskets allow for optimum flow and performance..63" thick. The new MP-2N Micropore technology does not use solvents making our...

Product#: MM1861

1960-76 Chrysler, Dodge, Plymouth; Air Cleaner Lid Foam Seal

Over time, the foam seal or gasket on your air cleaner lid can become brittle, dry out, and lose its ability to seal properly. This replacement air cleaner lid foam seal restores the original sealing surface so your lid fits...

Product#: TF700507

1956-61 Chevrolet Bel Air, Intake Manifold And Carburetor Gasket Set; Dual 4 bbl.

Reproduction of the original intake manifold gaskets designed for use with 1958-61 Chevrolet Bel Air, Two-Ten Series, One-Fifty Series, Impala, Biscayne, and Fill Size Chevrolet models as listed below with dual 4 bbl.

Product#: 19013A

1962-96 Ford; 289/302; Intake Manifold Dress-Up Bolt Set; Allen Head; 12 Pieces

Engine dress-up bolts for 289/302 Ford engines. Choose our intake manifold sets for an allen head bolt that provides for a sleek custom look under the hood.

Product#: TF700634

1955-57 Chevy Bel Air, 150, 210; Intake Manifold Bolt Set; Small Block V8; 12 Piece Set

Reproduction of the original style intake manifold bolts for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each bolt is manufactured to correct factory specifications and cadmium plated featuring the correct...

Product#: AR1437

Mopar 273-440 Wedge Black Oxide With Hexhead Arp® Intake Manifold Bolt Set

Prevent intake manifold leaks with these quality fasteners from ARP®. Wide underhead flanges and companion washers provide even load distribution while precision-rolled threads prevent galling and promote consistent...

Product#: TF700511

1957 Chevrolet Bel Air, 150, 210, Nomad; Carburetor Choke Cover; Single Quad

Reproduction of the original carburetor choke cover designed for use with 1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Nomad models. This carburetor choke cover is for use with single quad carburetors.