Product#: 66650

Valve Cover Nut and Stud Set; Chrome; 1" Tall; With Stainless Steel Washers; Set of 4

These chrome plated mini nuts hold your valve covers firmly in place ensuring a good gasket seal. Each set includes: (4) chrome plated mini nuts, no logo, (4) 1/4-20 thread mounting studs and (4) stainless steel washers. Sold...

Product#: 66003

Stamped Valve Cover Tab Washers Set of 8

If you're looking for a nice set of valve cover hold-downs, look no further. Proform offers these chrome coaated steel valve cover hold-downs that definitely add a nice touch to your engine compartment. They are sold as a set...

Product#: T4993

Chrome Valve Cover Spreader Bar Set; Small Block Chevrolet; 4 Pieces

By spreading the load over a wider area, these hold-down clamps minimize distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage.

Product#: MD2324

1970-74 Mopar Small Block Pcv Valve And Breather Grommet Set

Licensed reproductions of the grommets for the PCV valve and breather. For steel covers only. Features all correct markings as original. Mopar Authentic Restoration™ Product Applicat ions: 1970-74 318ci 1970-73 340ci...

Product#: MN2140

Moroso Pcv Grommet For Fabricated Valve Covers.095"

This PCV grommet for Moroso fabricated aluminum valve covers. Provides a superior seal to allow the engine to pull greater vacuum.

Product#: A5706412

1941-62 Chevrolet 235, 261 Stovebolt Inline-6; OTB Gear Stud Kit for Cast Aluminum Finned Valve Covers

OTB Gear 216 style stud kit for mounting OTB 216 Chevy 6 valve cover to later model 235 or 261 engines. These studs are machined from hardened steel with smooth rolled threads and properly chamfered ends. They are 3/8"-16,...

Product#: MN2142

Moroso Breather Grommets with Intregated Baffle For Fabricated Valve Covers.095"

These breather grommets are for Moroso fabricated aluminum valve covers features an integral baffle. Provides a superior seal to allow the engine to pull greater vacuum.

Product#: 7281

1/4"-20 x 5"; Valve Cover Wing Bolt; Chrome Plated

Value-priced chrome plated wing nut bolts give your engine valve covers a new look. 1-1/4" long threadeds.

Product#: MN1051

1961-74 Mopar 1/2" Pcv Valve Grommet

Service replacement PCV valve grommet for 1961-74 Mopar models. This grommet measures 1/2" outer diameter and will fit openings of this size in the valve cover.

Product#: 9776721

1976-1984 GM Valve Cover Crankcase Vent Hole Grommet

Correct valve cover and crankcase molded rubber grommets which insert into the valve cover where the PCV or air cleaner to valve cover elbow is inserted. Each grommet is manufactured to exact specifications and will fit most...

Product#: T9423

Valve Cover Bolt Set - Chrome 5/16"-18 X 1" (4)

We now offer these original style chrome valve cover bolts for use with early 1st and 2nd generation Firebirds and Trans Am models. Each bolt features 5/16"-18 threads on a 1" shaft. Each set includes 4 bolts.

Product#: MN1000

Mopar Steel Valve Cover Bolts

Mopar Performance valve cover chrome plated bolt/washer 5/8" length Note:Designed for use with OE stamped steel valve covers only.

Product#: AR4759

1987-Up Chevy Small Block w/Center Bolt Covers Stainless Steel Hex Head 8 Pc Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 x 3.250" bolts and required flat...

Product#: AR4752

Chevy Big Block w/Stamped Steel Covers Stainless Steel 12 Point Head 14 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 bolts and is shipped with the...

Product#: MN1050

1962-76 Mopar Big Block PCV Valve Grommet Set

Set of grommets for cast aluminum valve covers for big block Mopar V8 models. Applications: 1960-71 Mopar 383ci 1972 Mopar 400ci 1960-65 Mopar 413ci 1963-64 Mopar 426ci Wedge 1966-76 Mopar 440c i

Product#: 19015B

1962-96 Ford; 170/200/289/302; Valve Cover Dress-Up Bolt Set; Allen Head; 12 Pieces; For Cast Aluminum

Engine dress-up bolts for various Ford engines cast aluminum valve cover. Choose our valve cover sets for a allen head that provides for a sleek custom look under the hood. You will have extra bolts if you purchase this set...

Product#: E4415

Edelbrock Signature Series Chrome Oil Fill Cap

Each oil fill cap features embossed Edelbrock signature script and are designed to plug the oil fill hole on any of Edelbrock's signature series valve covers or any 1-1/4" diameter fill hole. Produced in lustrous chrome for a...

Product#: AR2007620

ARP 12-Point Black Oxide 1/4"-20 Cast Valve Cover Stud Kit - 12-Pieces - Ford Windsor Small Block

ARP high performance valve cover stud kits for cast aluminum valve covers. These studs ensure a leak-free seal on your Mustang's valve covers. They are available in black oxide chrome moly steel or polished stainless steel...

Product#: K0083

1965-05 Chevrolet/GMC; Valve Cover Grommets; Big Block; Car and Truck Models

Reproduction valve cover grommets for Chevrolet 6 cylinder valve covers and 1965-72 Chevrolet big block valve covers. Included is the 3/4" i.d. x 1-1/4" o.d. PCV valve grommet and a 7/8" i.d. x 1-1/4" o.d. valve cover to air...

Product#: 3989349

1969-82 Chevrolet; Valve Cover PCV Grommet; Small Block; with High Performance; LH Grommet

Reproduction of the original valve cover grommet designed for use with various 1969-92 GM small block valve covers. Each grommet is precision-molded in quality EPDM rubber and replicates the original factory configuration for...

Product#: 3894337

1958-1981 GM, Chrysler; Valve Cover Grommet; Rubber; Each; Various Models

Valve cover grommet designed for use with various 1947-81 makes and models as listed. This utility plug is manufactured in quality EPDM rubber and is used on valve covers with 1.25 inch diameter holes. Designed to plug the...

Product#: 66038

Chrome Valve Cover Mini Nut Set; 4 Pieces; 1/4"-20 Studs; 1-3/8" Tall

These mini nuts hold your valve covers firmly in place ensuring a good gasket seal with no oil leaks.

Product#: 66036

Chrome Deluxe Valve Cover Wing Nut Set; 4 Pieces; 5/16"-18 Studs; 4" Tall

Whether you use extra tall or stock height valve covers, these deluxe wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look.

Product#: 66006

Chrome Deluxe Valve Cover Wing Nut Set; 4 Pieces; 1/4"-20 Studs; 4" Tall

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look.

Product#: T4936

Valve Cover T-Bar Wing Nut and Stud Set; Chrome; 1/4"-20 Thread; 5" Tall; Set of 4

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look. 5" tall with 1/4"-20...

Product#: 41371

Chrome Valve Cover Wing Nut Set; 1/4"- 20 Threads; 3-1/2" Tall

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. These wing nuts are considered tall as compared to standard wing nuts....

Product#: T4938

Valve Cover T-Bar Wing Nut and Stud Set; Chrome; 1/4"-20 Thread; 4" Tall; Set of 4

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look. 4" tall with 1/4"-20...

Product#: 3868842

1966-73 Chevrolet/GMC; Valve Cover Elbow; Big Block

Reproduction valve cover elbow used to connect the hose between the air cleaner and RH passenger side valve cover on various 1966-73 Chevrolet models with a big block engine.

Product#: 41381

Chrome Valve Cover Wing Nuts; 5/16"-18 Threads' 3-1/2" Tall

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. These wing nuts are considered tall as compared to standard wing nuts....

Product#: 3923260

1968-74 Chevrolet/GMC; Valve Cover Elbow; Small Block Chevrolet

Reproduction valve cover elbow for various 1968-74 Chevrolet models with small block engines. This is the elbow that inserts into the RH passenger side valve cover and completes the connection to the air cleaner hose. Fits...

Product#: AR4757

Chevy Small Block with Cast Aluminum Covers 8 Piece Stainless Steel Hex Head Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 bolts and is shipped with the...

Product#: MN2073

1963-76 Mopar 361-440 (Except Hemi) Big Block Performance Valve Cover Gaskets

Mr. Gasket performance valve cover gaskets are manufactured from high-density cork/rubber blend gasket material that is 3/16" thick and provides excellent sealing and durability. New gaskets are a must when removing or...

Product#: AK132A

1955-86 Chevrolet Small Block; Valve Cover Bolt Set; For Stamped Steel Covers; Chrome

The ultimate hex head bolts for your classic small block Chevrolet engine! Each set includes chrome plated bolts for engines with stamped steel valve covers.

Product#: AR4753

Chevy Small Block w/Cast Aluminum Covers Stainless Steel 12 Point Head 8 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 bolts and is shipped with the...

Product#: D141756

Black Crinkle Valve Cover Wing Nut (4 Per Set)

Tall Valve Cover Wing Nuts: Weather you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal and installation faster and easier. These wing nuts are considered tall as...

Product#: G7229

1947-1981; Valve Cover Grommet; Rubber; Each

Valve cover grommet designed for use with various 1947-1981 makes and models as listed. This utility plug is manufactured in quality EPDM rubber and used on valve covers with 1.25 diameter holes. Will plug up the opening hole...

Product#: AR4755

Chevy Small Block with Stamped Steel Covers Stainless Steel Hex Head 8 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 bolts and is shipped with the...

Product#: AR1755

Chevrolet Small Block with Stamped Steel Covers Black Oxide Hex Head 8 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 bolts and is shipped with the...

Product#: AR4756

Chevy Big Block with Stamped Steel Covers Stainless Steel Hex Head 14 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 bolts and is shipped with the...

Product#: T9640

Chrome Valve Cover Spreader Bar Set; Big Block Chevrolet; 7 Pieces

By spreading the load over a wider area, these hold-down clamps minimize distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage.

Product#: AR1751

Chevy Small Block with Stamped Steel Covers Black Oxide 12 Point Head 8 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 bolts and is shipped with the...

Product#: D141364

Metallic Gray Valve Cover Wing Nut (4 Per Set)

Tall Valve Cover Wing Nuts: Weather you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal and installation faster and easier. These wing nuts are considered tall as...

Product#: AR1753

Chevrolet Small Block w/Cast Aluminum Covers Black Oxide 12 Point Head 8 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 bolts and is shipped with the...

Product#: AR4758

Chevy Big Block with Cast Aluminum Covers Stainless Steel Hex Head 14 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 bolts and is shipped with the...

Product#: AR1758

Chevrolet Big Block w/Cast Aluminum Covers Black Oxide 12 Point Head 14 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 bolts and is shipped with the...

Product#: G8376

55-91 Valve Cover Spreader Bar

We now offer original valve cover spreader bars. Replace your existing bars with factory fresh originals!

Product#: AR4754

Chevy Big Block w/Cast Aluminum Covers Stainless Steel 12 Point Head 14 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 bolts and is shipped with the...

Product#: AR1759

1987-Up Chevy Small Block with Center Bolt Covers Black Oxide Hex Head 8 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 x 3.250" bolts and required flat...

Product#: AK131B

1955-86 Chevrolet Small Block; Valve Cover Bolt Set; For Cast Aluminum Covers; Polished Stainless Steel

The ultimate hex head bolts for your classic small block Chevrolet engine! Each set includes stainless steel bolts for engines with cast aluminum valve covers.

Product#: AR4760

1987-Up Chevy Small Block w/Center Bolt Covers Stainless Steel 12 Pt Head 8 Pc Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Stainless Steel set has 1/4"-20 x 3.250" bolts and required flat...

Product#: AR1760

1987-Up Chevy Small Block w/Center Bolt Covers Black Oxide 12 Point Head 8 Pc Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 x 3.250" bolts and required flat...

Product#: AR1752

Chevy Big Block with Stamped Steel Covers Black Oxide 12 Point Head 14 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 bolts and is shipped with the...

Product#: G8374

1955-91 Valve Cover Bolt 1/4-20 X 9/16

We now offer original valve cover bolts for 2rd generation Camaros. Install new valve covers or replace your existing bolts with factory fresh originals!

Product#: AR1754

Chevrolet Big Block with Cast Aluminum Covers Black Oxide Hex Head 14 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 bolts and is shipped with the...

Product#: 3989348

Valve Cover Grommet; Small Block; with High Performance; RH

Correct small block valve cover grommet for insertion into the valve cover ventilation to air cleaner elbow hole. One each required per car (RH side valve cover). Camaro applications 1969 302 1970-73 350 (Z28) 1971-75 with...

Product#: 66002-BCHW

Chrome Flange Hold Downs. Chevy S/B & B/B; Ford S/B. 3" Long.

For Chevy small block, Chevy big block (exhaust side), Ford small block (exhaust side) 351C and 351M (intake side). 3" long. 4 per package.

Product#: AR1757

Chevrolet Small Block with Cast Aluminum Covers Black Oxide Hex Head 8 Piece Valve Cover Bolt Set

The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. This Black Oxide set has 1/4"-20 bolts and is shipped with the...

Product#: P128

LS Coil Relocation Set

Relocation brackets allow you to remotely mount your coil packs virtually anywhere. Machined from 6061 Aluminum. Black Anodized. Designed to work with LS-2,3,7 and 9. Made in USA Kit includes four (4) brackets and mounting...

Product#: MN2036

1964-91 Mopar Small Block Performance Valve Cover Gaskets

Mopar Performance valve cover gaskets. New gaskets are a must when removing or replacing your valve covers.

Product#: P130

Clayton Machine Works LS Coil Covers with Black Finish

Elegantly hides LS coil packs. Fits GM LS engines utilizing existing coil bracket mounting points. Designed to fit LS crate motors and will not clear factory high mount alternators (such as those found on Corvettes) unless a...