Product#: MD2144

1971-72 Dodge, Plymouth; Accelerator Pedal Pad and Bezel Kit ; Various Models

Reproduction of the original accelerator pad, bezel and hardware designed for use on Dodge and Plymouth A, B and E-body models. This injection molded ABS accelerator pedal pad set includes the pedal pad, stainless steel...

Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: 3864740

1964-71 Chevrolet Car & Truck; Floor Mounted Accelerator Pedal Pad; Rubber; with Steel Insert; Factory Style Reproduction

Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Manufactured in quality hard EPDM rubber, this pad is a great upgrade over plastic service replacement pads and...

Product#: 368077

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Tension Spring; Various Car and Truck Models

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

Product#: 3798256

1955-69 GM; Accelerator Pedal Firewall Bushings; 1/2" Long, 5/16" I.D.; Pair

Reproduction accelerator firewall bushings for various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive play in the gas pedal pad while...

Product#: MB327

1966-70 Charger, Coronet, Belvedere, GTX, Superbird; Accelerator Pedal Pad; Floor Mounted; with Steel Core

Reproduction of the original accelerator pedal pad designed for use on 1966-70 Belvedere, Charger, Road Runner, Satellite and Superbird B-Body models. This quality reproduction is manufactured in hard rubber material...

Product#: 3864742

1964-71 Chevrolet, GMC Car & Truck; Floor Mounted Accelerator Pedal Pad Trim Plate; Various Models

Correct reproduction accelerator pedal pad stainless trim plate for various 1965-71 GM vehicles. Manufactured in stamped stainless steel, this trim plate helps restore a factory-correct, period-correct pedal appearance with...

Product#: *R5005

1967-77 GM Pedal Pad Kit With Disc Brake Emblem; Auto Trans; 6-Piece Kit

Reproduction of the original pedal pads designed for 1967-68 Camaro, Firebird and a variety of additional GM models as listed. This pedal pad set is designed to replace the worn out original pads for models with disc brakes...

Product#: *R5003

1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....

Product#: K519

1968-69 Camaro, 1968-74 Nova, Omega, Ventura; Accelerator Pedal Assembly; V8; 307ci, 327ci, 350ci, 396ci, 402ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: C133

Powerglide Upper Kickdown Clip

OER® Authorized reproduction upper kickdown clip for models with powerglide automatic transmission. Connects the upper passing gear kickdown rod to the bellcrank assembly. Applications: 1967-69 Camaro with Powerglide...

Product#: 14121

1955-59 Chevrolet, GMC Truck; Throttle Linkage; V8; Zinc Coated

Reproduction throttle linkage for 1955-59 V8 Chevrolet and GMC trucks. Manufactured to OE specifications and zinc plated for long lasting dependibility. Goes from the accelerator pedal, through the firewall and up to the...

Product#: *R5009A

1972-81 GM Pedal Pad Kit; Manual Trans; 4 Piece Kit; Various Models

Reproduction of the original pedal pads designed for use on 1976-81 Camaro, Firebird and various other GM models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual...

Product#: 368078

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Mounting Pin; Various Car & Truck Models

This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...

Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

Reproduction accelerator pedal for 1968-2004 GM vehicles. Manufactured in injection molded ABS, this pedal replicates the original in fit and design to help restore a factory-correct, period-correct pedal appearance. Features...

Product#: *R5007

1967-68 Camaro / Firebird Pedal Pad Kit - Disc Brakes - Manual Trans - 8 piece

Reproduction of the original pedal pads designed for 1967-68 Camaro and Firebird models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual transmissions. Replacing the...

Product#: K518

1967 Firebird; Accelerator Pedal Assembly; V8; 326ci, 400ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: 3909978

1967 Chevy, Pontiac; Accelerator Pad; with Steel Backing Plate; OE Style; Various Models

Reproduction of the original accelerator pedal pad designed for use on various 1967 GM models. This accelerator pedal pad is manufactured in the correct design based on a steel backing unlike the GM plastic replacements. The...

Product#: *R5018

1970-71 Camaro Z28 with Disc Brakes and Manual Transmission Pedal Pad Kit - 7 Piece Set

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

Product#: K517

1967 Camaro; Accelerator Pedal Assembly; V8; 327ci, 350ci, 396ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Camaro models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: K912

1967-2004 Buick, Chevy, Pontiac, Olds; Accelerator Pedal Pad Trim Plate; Stainless Steel; Various Models

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, this trim plate is stamped in quality stainless steel for a superb, factory-correct...

Product#: *R5004

1967-77 GM Pedal Pad Kit - Auto Trans - 6 Piece Kit

This complete kit is designed to replace pedal pads and trim plates on a variety of Chevrolet models including 1967-68 Camaro with drum brakes and an automatic transmission as well as a variety of additional GM models as...

Product#: *R5009

1969-71 GM Pedal Pad Kit Manual Transmission; With Disc Brakes Emblem - 8 Piece

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...

Product#: MD2169

1962-65 Dodge,Plymouth A, B-Body; Accelerator Pad, Floor Mounted

Reproduction of the original accelerator pedal pad designed for use on 1962-65 Dodge and Plymouth models. This quality reproduction is manufactured with an OEM style embedded steel core offering an authentic appearance and...

Product#: 9789018

1967 Firebird; Accelerator Pad To Rod Support; OE Style Steel Reproduction

Reproduction of the original accelerator pad to rod support designed for use on 1967 Firebird models. This is the support that bolts to the firewall and holds the accelerator pedal shaft. This item will replace your often...

Product#: CX1215

1964-66 Chevy, GMC Pickup, Panel, Suburban; Accelerator Pedal Pad

Reproduction accelerator pedal pad for 1964-66 Chevrolet and GMC trucks. Manufactured in plastic to original specifications, this pad replicates the factory-correct look with the correct original style waffle pattern at the...

Product#: 9789015

1967 Pontiac Firebird; Accelerator Pedal Rod ; with V8

Reproduction of the original accelerator pedal rod designed for use on 1967 Firebird models with V8 engines. The pedal rod is the final link in your Firebird models accelerator/throttle activation system. This special rod...

Product#: *R5002

1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...

Product#: *R1011

1969 Firebird; Pedal Pad Kit; with Stainless Trim; Auto Trans; 6 Piece Set

Reproduction of the original pedal pads with trim designed for 1969 Firebird models. This pedal pad and trim set is designed to replace the worn out original pads for 1969 Firebird models with automatic transmissions....

Product#: 3912540

1967 Camaro; Accelerator Throttle Arm; V8 Small Block; 302ci, 327ci, 350ci

Correct reproduction of original style GM throttle lever arm designed for use on 1967 Camaro V-8 small block 302ci, 327ci, 350ci models. Each throttle arm is designed and remanufactured to replicate the original in appearance...

Product#: *R1010

1969 Firebird; Pedal Pad Kit; Manual Trans; 8 Piece Set

Reproduction of the original pedal pads designed for 1969 Firebird models. This pedal pad set is designed to replace the worn out original pads for 1969 Firebird models with manual transmission. Replacing the pedal pads will...

Product#: T6242

1973-83 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Billet Aluminum Pedal Set; with Auto Trans; 4 Piece Set

If you want to add a custom appearance to your pedal pads, this Billet aluminum pedal set is what you want! Each pedal unit is manufactured in quality Billet aluminum offering a unique and custom appearance that will enhance...

Product#: *R5017

1970-71 Camaro Z28 with Drum Brakes and Manual Transmission Pedal Pad Kit - 7 Piece Set

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

Product#: K520

1969 Camaro; Accelerator Pedal Pad Assembly; V8; with Cowl Induction

This is the complete accelerator pedal assembly which extends from the firewall on all V8-equipped vehicles with cowl induction. This assembly comes complete with the accelerator pedal, pedal mount pin and spring, accelerator...

Product#: ME1614

1973-74 Dodge, Plymouth; Accelerator Pedal Pad with Bezel and Hardware; Various Models

Reproduction of the original accelerator pedal pad, chrome trim and mnounting hardware designed for use on 1973 Mopar B,C, and E-Body models. Manufactured exactly as original including the correct grain texture for an...

Product#: *R5019

1970-71 Camaro Z28 Pedal Pad Kit ; Drum Brakes, Auto Trans; 6 Piece Set

Reproduction of the original pedal pads and trim plates for use on 1970-71 Camaro Z/28 models. This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z/28 models with drum brakes and automatic...

Product#: *R5016

1970-71 Camaro Z28 with Disc Brakes and Automatic Transmission; 5-Piece Pedal Pad Kit

This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z28 models with disc brakes and an automatic transmission. Kit includes Accelerator pedal pad Disc Brake pedal pad with the "Disc Brakes" chrome...

Product#: 9789456

1967 Firebird; Accelerator Throttle Arm; V8; 326ci, 400ci

Correct reproduction of the original accelerator throttle arm designed for use on 1967 Pontiac Firebird V8 models. Manufactured in stamped steel to OE specifications, each throttle arm features correct contours that provide...

Product#: CX1216

1967-70 Chevy, GMC Pickup, Blazer. Suburban; Accelerator Pedal Pad; w/o Trim Package

Reproduction accelerator pedal pad for 1967-70 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models with standard interiors. Manufactured in injection molded ABS to original specifications, this pad restores a...

Product#: T6243

1984-96 Chevy, GMC C/K Pickup, Blazer, Jimmy, Suburban, Tahoe, Yukon; Billet Aluminum Pedal Set; with Auto Trans; 3 Piece Set

If you want to add a custom appearance to your pedal pads, this Billet aluminum pedal set is what you want! Each pedal unit is manufactured in quality Billet aluminum offering a unique and custom appearance that will enhance...

Product#: TF700447

1955-57 Chevrolet Throttle Linkage And Pedal To Firewall Mounting Hardware

Reproduction throttle linkage bolts and washers for 1955-57 Chevy models. Designed to mount throttle linkage to the firewall. Worn hardware should replaced to prevent sticky accelerator linkage. Also mounts the accelerator...

Product#: CX1213

1958-59 Chevrolet, GMC Truck; Accelerator Pedal Pad

Reproduction of the original accelerator pedal pad designed for use with 1958-59 Chevrolet and GMC trucks. Manufactured in quality EPDM rubber to original factory specifications, this pad replicates the original design to...

Product#: CX1223

1947-55 Chevrolet, GMC; Foot Starter Bellow Boot

This reproduction of the original foot starter bellow boot designed for use with 1947-55 Chevrolet and GMC truck models. Each bellow boot is manufactured in quality EPDM rubber to factory specifications matching the original...

Product#: E284

1968-69 Camaro; Gas Pedal Throttle Set; 5 Piece Set

Reproduction of the original gas pedal throttles and hardware designed for use with 1968-69 Camaro models. Each set includes the gas pedal arm, bushing, throttle arm, and grommet for a complete replacement of the throttle. 5...

Product#: BG6127

1962-67 Chevy II / Nova Lokar Billet Accelerator Pedal Assembly - Black w/Rubber Inserts

Lokar 1962-67 Nova billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The traditional...

Product#: CX1212

1953-57 Chevrolet, GMC Pickup, Panel, Suburban; Accelerator Pedal Pad

Reproduction of the original accelerator pedal pad designed for use with 1953-57 Chevrolet and GMC trucks. Manufactured in quality EPDM rubber to original factory specifications, this pad replicates the original vertical...

Product#: MB2243

1966-70 Mopar B-Body Accelerator Pedal Seal - Each

Reproduction of the original accelerator pedal pad seal designed for use on 1966-70 Mopar B-body models. Each seal is designed to replace the original exactly. For use on the applications listed below. Sold individually....

Product#: BAG6096

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Assembly - Brushed w/Rubber Inserts

Lokar 1967-69 Camaro & Firebird billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The...

Product#: BAG6127

1962-67 Chevy II / Nova Lokar Billet Accelerator Pedal Assembly - Brushed with Rubber Inserts

Lokar 1962-67 Nova billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The traditional...

Product#: CX1222

1947-59 Chevy, GMC Truck; Foot Starter Pedal Pad

Reproduction of the original style starter pedal pad designed for use with 1947-59 Chevrolet and GMC trucks. The foot starter pedal pad can crack and wear out over time. Replacing the pad will help the appearance of the...

Product#: ME1612

1970 Mopar E-Body accelerator Pedal Without Bezel

Reproduction of the original accelerator pedal for 1970 Barracuda, 'Cuda and Challenger models. Manufactured with the correct details and grain texture for an authentic appearance. Includes pedal and hardware. For hardware...

Product#: C938531

1968-69 Firebird; Accelerator Pedal Lever; with V8 or 6 cyl.

Reproduction of the original accelerator pedal lever Pontiac used on 1968-69 Firebird models with either a 6 cyl. or 8 cyl. engine. This lever mounts at the firewall with the accelerator pedal mounting to one end and the...

Product#: BAG6074

1955-57 Chevy Lokar Billet Accelerator Pedal Assemby - Small Block - Brushed w/Rubber Inserts

Lokar 1955-57 Chevy fullsize passenger car models billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing yout o change from the factory rod linkage to a modern throttle...

Product#: BAG6095

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Assembly - Ball Milled Finish

Lokar 1967-69 Camaro & Firebird billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The...

Product#: MA2215

1967-68 Mopar A-Body accelerator Pad With Bezel

Reproduction of the original accelerator pedal for 1967-70 Barracuda, Dart and Valiant models. Replace those broken or missing parts with a new quality reproduction accelerator pad kit. Included is the pad, hardware, and a...

Product#: BAG6126

1962-67 Chevy II / Nova Lokar Billet Accelerator Pedal Assembly - Ball Milled Finish

Lokar 1962-67 Nova billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The traditional...

Product#: MA2214

1967-68 Mopar A-Body accelerator Pad Without Bezel

Reproduction of the original accelerator pedal for 1967-68 Barracuda, Dart and Valiant models. Manufactured with the correct details and grain texture for an authentic appearance. Includes pedal and hardware. M opar Authentic...

Product#: CX1219

53-57 Chevrolet, GMC Truck; Accelerator Pedal Rod and Pin

Correct reproduction of the original accelerator rod and pin designed for use with 1953-57 Chevrolet and GMC truck models. Will replace the missing or damaged original rod and pin allowing the accelerator to function...

Product#: M11012

1967-77 Camaro / Firebird; Manual Transmission; Aluminum; Pedal Cover Set

These aluminum pedal covers are unique to the market as they actually bolt-on to your pedal instead of clamping on like most aftermarket pedal covers. Manufactured with a hard coat black anodized inner and a brushed aluminum...

Product#: BAG6092

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Pad - Flat Style - Brushed wRubber Inserts

Lokars traditional flat style billet aluminum throttle pedal pad lets you retain the factory throttle linkage, with a updated look inside the car. The direct fit throttle pad replaces the factory pad, measures 2" x 5" and...