Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: 3749084

1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel

OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...

Product#: 368077

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Tension Spring; Various Car and Truck Models

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

Product#: 3798256

1955-69 GM; Accelerator Pedal Firewall Bushings; 1/2" Long, 5/16" I.D.; Pair

Reproduction accelerator firewall bushings for various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive play in the gas pedal pad while...

Product#: K519

1968-69 Camaro, 1968-74 Nova, Omega, Ventura; Accelerator Pedal Assembly; V8; 307ci, 327ci, 350ci, 396ci, 402ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

Reproduction accelerator pedal for 1968-2004 GM vehicles. Manufactured in injection molded ABS, this pedal replicates the original in fit and design to help restore a factory-correct, period-correct pedal appearance. Features...

Product#: *R5003

1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....

Product#: C133

Powerglide Upper Kickdown Clip

OER® Authorized reproduction upper kickdown clip for models with powerglide automatic transmission. Connects the upper passing gear kickdown rod to the bellcrank assembly. Applications: 1967-69 Camaro with Powerglide...

Product#: *R5005

1967-77 GM Pedal Pad Kit With Disc Brake Emblem; Auto Trans; 6-Piece Kit

Reproduction of the original pedal pads designed for 1967-68 Camaro, Firebird and a variety of additional GM models as listed. This pedal pad set is designed to replace the worn out original pads for models with disc brakes...

Product#: 368078

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Mounting Pin; Various Car & Truck Models

This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...

Product#: K912

1967-2004 Buick, Chevy, Pontiac, Olds; Accelerator Pedal Pad Trim Plate; Stainless Steel; Various Models

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, this trim plate is stamped in quality stainless steel for a superb, factory-correct...

Product#: GN110242

1978-88 Buick, Chevrolet Pontiac, Olds; Accelerator Pedal Pad; Various Models

Reproduction of the original accelerator pedal designed for use on various 1978-87 GM G-Body models. Manufactured in injection molded ABS to factory specifications replicating the original in quality and appearance. Will fit...

Product#: 403929

1968-79 Accelerator Control Cable Retainer ; Various Models

OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...

Product#: IN5195V

1968-69 Chevelle, El Camino, GTO, Skylark, LeMans, Tempest; Accelerator Pedal Assembly

Reproduction accelerator pedal assembly for 1968-69 Chevelle, El Camino, GTO, Skylark, LeMans, and Tempest models. Manufactured to factory specifications, this assembly includes the pedal pad, mounting arm, and firewall...

Product#: IN5196V

1970-72 Chevelle, El Camino, Monte Carlo, GTO, LeMans; 1970 Tempest; Accelerator Pedal Assembly

Reproduction accelerator pedal assembly for 1970-72 Chevelle, El Camino, Monte Carlo, GTO, and LeMans models, as well as 1970 Tempest. Manufactured to factory specifications, this assembly includes the pedal pad, mounting...

Product#: 340637

1974-81 Outer Accelerator Pull Spring

Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...

Product#: 9779969

1965-66 Various Pontiac Models Including GTO, LeMans, Tempest; Tri-Power; Throttle/Accelerator Cable; Mounting Bracket

Reproduction Tri-Power accelerator/throttle cable mounting bracket is a perfect fit for 1965-66 GTO, LeMans, Tempest, Grand Prix and Bonneville with Tri-Power 389 engine. 4 piece kit. See vehicle fitment for complete...

Product#: 3909978

1967 Chevy, Pontiac; Accelerator Pad; with Steel Backing Plate; OE Style; Various Models

Reproduction of the original accelerator pedal pad designed for use on various 1967 GM models. This accelerator pedal pad is manufactured in the correct design based on a steel backing unlike the GM plastic replacements. The...

Product#: *R5009A

1972-81 GM Pedal Pad Kit; Manual Trans; 4 Piece Kit; Various Models

Reproduction of the original pedal pads designed for use on 1976-81 Camaro, Firebird and various other GM models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual...

Product#: IN1211Z

1968-72 Pontiac GTO, Grand Prix, LeMans; Accelerator/Gas Pedal; Rubber OEM

Reproduction accelerator pedal for 1968-72 Pontiac GTO, Grand Prix and LeMans vehicles. Each accelerator pedal is manufactured in rubber like the rubber pedals that replicates the original in fit and design. It features the...

Product#: CB1539G

1967-71 Pontiac GTO, LeMans, Tempest; Accelerator; Throttle; Cable; GM#9792069

Reproduction accelerator/throttle cable bracket that is exactly like OEM. It features the correct OEM number stamped 9792069 unlike what was previously on the market. Fits 1967-71 GTO, LeMans and Tempest with 350ci, 400ci,...

Product#: *R5002

1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...

Product#: IN3091G

1964-65 Pontiac GTO, LeMans; Accelerator Pedal; OER Rubber

This pedal is a reproduction of the OEM 1964-65 Pontiac GTO and LeMans. Sold individually. This is a factory style rubber gas/accelerator pedal and is 100% correct.

Product#: *R5004

1967-77 GM Pedal Pad Kit - Auto Trans - 6 Piece Kit

This complete kit is designed to replace pedal pads and trim plates on a variety of Chevrolet models including 1967-68 Camaro with drum brakes and an automatic transmission as well as a variety of additional GM models as...

Product#: PY4216

1970 Firebird, Trans Am; Accelerator Lever Cable; 350, 400, 455 HO, or Ram Air

Reproduction accelerator lever cable for 1970 Firebird and Trans Am models with 350, 400, 455 HO or Ram Air. This cable extend from the accelerator to the throttle arm. If your original cable shows signs of fraying or...

Product#: IN2222G

1966-67 Pontiac GTO, LeMans; Gas Pedal; OEM Rubber

Reproduction OEM rubber accelerator pedal. This is a factory rubber accelerator pedal reproduced like the OEM for 1966-67 Pontiac GTO and LeMans. Most of the ones on the market are plastic. This reproduction is 100% correct....

Product#: K518

1967 Firebird; Accelerator Pedal Assembly; V8; 326ci, 400ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: PY4206

1971-74 Trans-Am Throttle Cables

These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.

Product#: *R5007

1967-68 Camaro / Firebird Pedal Pad Kit - Disc Brakes - Manual Trans - 8 piece

Reproduction of the original pedal pads designed for 1967-68 Camaro and Firebird models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual transmissions. Replacing the...

Product#: 3863501

1968-74 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Pad to Rod Support

Reproduction of the original style GM accelerator pedal rod support for use on the various Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each support is manufactured in injection molded ABS offering an exact...

Product#: 9789015

1967 Pontiac Firebird; Accelerator Pedal Rod ; with V8

Reproduction of the original accelerator pedal rod designed for use on 1967 Firebird models with V8 engines. The pedal rod is the final link in your Firebird models accelerator/throttle activation system. This special rod...

Product#: 9789018

1967 Firebird; Accelerator Pad To Rod Support; OE Style Steel Reproduction

Reproduction of the original accelerator pad to rod support designed for use on 1967 Firebird models. This is the support that bolts to the firewall and holds the accelerator pedal shaft. This item will replace your often...

Product#: *R5009

1969-71 GM Pedal Pad Kit Manual Transmission; With Disc Brakes Emblem - 8 Piece

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...

Product#: *R1011

1969 Firebird; Pedal Pad Kit; with Stainless Trim; Auto Trans; 6 Piece Set

Reproduction of the original pedal pads with trim designed for 1969 Firebird models. This pedal pad and trim set is designed to replace the worn out original pads for 1969 Firebird models with automatic transmissions....

Product#: *R1010

1969 Firebird; Pedal Pad Kit; Manual Trans; 8 Piece Set

Reproduction of the original pedal pads designed for 1969 Firebird models. This pedal pad set is designed to replace the worn out original pads for 1969 Firebird models with manual transmission. Replacing the pedal pads will...

Product#: 9789456

1967 Firebird; Accelerator Throttle Arm; V8; 326ci, 400ci

Correct reproduction of the original accelerator throttle arm designed for use on 1967 Pontiac Firebird V8 models. Manufactured in stamped steel to OE specifications, each throttle arm features correct contours that provide...

Product#: K0135

1968-80 Chevrolet, Pontiac; Accelerator Return Spring

This is a correct reproduction of the commonly missing or worn out accelerator return spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Chevrolet Applications:...

Product#: E8036

Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Cadmium Plated

Edelbrock throttle, cruise control, and transmission kick down set for pre-1978 small block Chevy cars with a TH350, 200R4, or 700R4 transmission. Manufactured in stamped steel and either chrome or gold cadmium plated....

Product#: 154116

1964-74 Camaro, Impala, Nova, Firebird; Accelerator Pedal to Firewall Support Mounting Screws; Pair

Correct reproduction of the original accelerator pedal to firewall support screws designed for use with the various GM models listed below. This screwis used for mounting the accelerator lever firewall support to the...

Product#: H145130

1968-74 Nova, 1969 Camaro; Holley; Drive by Wire Pedal Bracket;

These Drive by Wire (DRW) Accelerator Pedal Brackets fit 1969 Camaro/Firebird & 1968-1974 Nova/Ventura/Omega/Apollo. It is precision cut to fit in the stock location and then powder-coated to provide years of worry-free use....

Product#: P170

1970-81 Camaro/Firebird Billet Throttle Assembly with Black Anodized Finish

Manufactured from solid aluminum, each billet throttle assembly is fully adjustable featuring a uniquely designed molded rubber insert, and spring loaded pedal. Made in USA Each assembly is anodized with machined highlights.

Product#: G13229

1967-76 Chevrolet; Drive By Wire Pedal for LS Engines; 10379038 - Genuine GM

Genuine GM pedal for drive by wire applications. Original equipment for 2004-14 Cadillac CTS. Replaces OE# 10379038. Use with the following drive by wire brackets: DBW6300 1967-68 Camaro DBW6301 1969 Camaro DBW6302 1970-81...

Product#: K88652

1970-81 Camaro, Firebird, 1970-93 GM Models; Accelerator Pedal Lever Support and Reinforcement Set

Reproduction accelerator pedal lever support and reinforcement for 1970-81 Camaro, Firebird and various other GM models. Manufactured from plastic in two pieces and is the correct support to the firewall for your accelerator...

Product#: D60111

Detroit Speed; C6 Throttle Pedal Bracket

The C6 throttle pedal bracket is a bolt-on bracket that mounts the 2005-2013 C6 Corvette electronic throttle pedal to the firewall in a 1967-1969 Camaro. The bracket comes black e-coat. 1967-69 Camaro 1967 -69 Firebird...

Product#: P171

1970-81 Camaro/Firebird with Auto Trans Billet Throttle Assembly with Pedal Covers - Black Anodized

Manufactured from solid billet aluminum, this black anodized custom pedal assembly set includes a throttle pedal assembly paired with a matching brake pedal cover. The billet throttle pedal assembly is fully adjustable,...

Product#: 3924414

Accelerator Cable Ball Stud

Replacement accelerator cable ball stud for models that require a 1/4"-20 thread with.25" dia. ball and.98" overall length.

Product#: BG6096

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Assembly - Black with Rubber Inserts

Lokar 1967-69 Camaro billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The traditional...

Product#: SR4016

Lokar Throttle Cable Bracket & Spring Set - Big Block 502 - Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: S8520

Barefoot Gas Pedal Pad; Chrome With Black Powder Coated Inlay

Stomp on it in true retro style with this groovy barefoot accelerator pedal cover. This far out pedal cover takes you back to the sixties every time you drive your classic. Chrome cover mounts over your existing accelerator...

Product#: P145

1967-69 F-Body; 68-74 Nova - Billet Throttle Assembly with Black Anodized Finish

Manufactured from solid aluminum, each billet throttle assembly is fully adjustable featuring a uniquely designed molded rubber insert, and spring loaded pedal. Made in USA Each assembly is anodized with machined highlights.

Product#: P146

1967-69 Camaro, Firebird; 68-74 Nova; Lokar Billet Throttle Pedal Assembly and AT Brake Pedal Cover Set; Black Anodized

Manufactured from solid billet aluminum, this black anodized custom throttle pedal and brake pad set includes a custom black anodized throttle pedal assembly paired with a matching brake pedal cover. The billet throttle pedal...

Product#: BG6092

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Pad - Flat Style - Black w/Rubber Inserts

Lokars traditional flat style billet aluminum throttle pedal pad lets you retain the factory throttle linkage, with a updated look inside the car. The direct fit throttle pad replaces the factory pad, measures 2" x 5" and...

Product#: 154214

1955-1970 Accelerator Throttle Lever Arm Pinch Bolt Kit

Correct reproduction accelerator throttle lever to pedal rod pinch bolt kit, includes (1) 1/4-20 x 1-1/4" grade 5 bolt, nut & washer. GM Full Size passenger car applications: 1955-1970 Camaro applications: 1967-1969 Chevy...

Product#: DBW6302

1970-81 Camaro / Firebird LS Engine Drive By Wire Pedal Bracket Set (Pedal Sold Separately)

Designed to be a bolt-on installation, this bracket set adapts the popular GM 10379038 or equivalent pedal to your 1970-81 Camaro or Firebird. Simply remove the factory throttle linkage and bolt this bracket in place for an...

Product#: A9400139

1993-02 Camaro, Firebird; Clutch, Brake & Accelerator Pedal Assembly; w/ T56 Manual Transmission

Reproduction clutch, brake and throttle pedal assembly for 1993-2002 Camaro and Firebird models with a T56 manual transmission. A direct replacement for factory 6-Speed manual transmission models. Ideal for those who are...

Product#: P172

1970-81 Camaro/Firebird with Manual Trans Billet Throttle Assembly w/Pedal Covers - Black Anodized

Manufactured from solid billet aluminum, this black anodized custom pedal assembly set includes a throttle pedal assembly paired with a matching brake pedal cover. The billet throttle pedal assembly is fully adjustable,...

Product#: SR4015

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: SR4017

Lokar Throttle Cable Bracket & Spring Set - Big Block 502 - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: SR4014

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: DBW6200B

Lokar CTS-V Black Anodized Billet Accelerator Pedal

Direct-fit billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved...