Classic Industries Restoration Parts and Accessories - Door Panels & Components

Typical Kit includes fasteners to attach: Air vent duct, ash tray and liner, carpet, coat hooks, console, courtesy lamps, dash pads, and mouldings, inside door handles, armrests, dome lamp, door grilles, door panels, glove...

Replace your faded or broken power window switch bezel with this correct reproduction for 1994-04 Mustang models. This bezel is plastic molded from the manufacture and available in several factory colors.

Replace your faded or broken power window switch bezel with this correct reproduction for 1994-04 Mustang models. This bezels is plastic molded from the manufacture and available in several factory colors.

Correct nylon trim panel retainer (commonly referred to as "Christmas Tree" retainer) for use on a wide variety of GM models throughout the 1970's-90's. Some popular uses include using the pin for retaining the upper side...

Vintage-style door panel guards for most classic cars and trucks. This accessory was popular in the 1950s to protect the upper door panels from wear and discoloration from resting your arm at the top of the door. Now you can...

Top quality arm rest pads for any Mustang from 1965 to 1973! These fine reproductions are manufactured in the U.S.A. These are NOT low quality imports! All our pads are foam filled and molded as original, with the metal...

Top quality arm rest pads for any Mustang from 1965 to 1973! These fine reproductions are manufactured in the U.S.A. These are NOT low quality imports! All our pads are foam filled and molded as original, with the metal...

Excellent quality arm rest pads for use on 1965-73 Mustangs. These authentic reproductions are manufactured the original dessign and will fit and install same as originals. Includes correct grain and texture for an...

Accurately reproduced in metal - reinforced polyurethane. Sold in pairs.

This pair of arm rest plugs are made to replace your factory ones with no modification needed. These arm rest plugs can be dyed to match the interior of your 1967 Mustang. 1968 Parchment 4 piece kit does 1 car.

1965-68. This piece is located near the rear seat on the convertible. The inner quarter panels were equipped with an ash tray on both sides, and the reproduction will replace the original unit.

Replace the cracked, deteriorated or missing arm rest pads and bring new life to your interior. All our pads are foam filled and molded as original, with the metal insert encapsulated in foam and feature the correct...

Replace your faded or broken power window switch bezel with this correct reproduction for 1994-04 Mustang models. This bezel is plastic molded from the manufacture and available in several factory colors.

Reproduction center console arm rest lid for 1974-78 Mustang II models. Manufactured out of urethane with tooling developed from an original NOS arm rest. Each arm rest allows you to reuse your existing hinge and latch for a...

Replacement ABS lower door panels with speaker pods for various 1978-87 G-Body models. Manufactured to accommodate one or two 5-3/4" speakers. Available in factory colors, featuring the correct grain to match your factory...

Our Restorer's Choice™ reproduction door panels for Mustang Convertible models with manual windows are manufactured to factory specifications by TMI™ with correct colors and trim combinations for proper fitment...

Includes RH and LH ash tray and well cover upholstery to completely replace that portion of the rear passenger compartment. Each unit is pre-sewn to install exactly as originals. Covers the arm rest and well section on each...

Complete rear standard pre-assembled door panels are completely original and easy to install. Each unique panel has been reproduced for the most discriminating restorer eliminating the need to replace the upper reinforcement...

Molded from heavy gauge ABS material for correct fit and appearance, these door panels fit 1982-85 Chevrolet S-10 Pickup / Blazer or GMC S-15 Pickup / Jimmy models with power windows and manual door locks. Made in USA ...

Dielectrically heat-sealed Dakota grain front door panels for a factory look and feel. Made in USA Applications: 1969 Dart GT Hardtop 1969 Dart GT Convertible with front bucket seats

Includes RH and LH ash tray cover upholstery to completely replace that portion of the rear passenger compartment. Each unit is pre-sewn to install exactly as originals. Covers the arm rest section on each side of the rear...

Includes RH and LH ash tray cover upholstery to completely replace that portion of the rear passenger compartment. Each unit is pre-sewn to install exactly as originals. Covers the arm rest section on each side of the rear...

Replacement door panels for 1977-80 Chevy or GMC truck models are made from new tooling for a great fit. Manufactured from durable heat resistant ABS. Features pre-cut hole for window crank, power door lock switch, and door...

Dielectrically heat-sealed Coachman grain rear panels with woodgrain accents and smooth chrome bands for a factory look and feel. Made in USA Applications: 1972 Dart Swinger 2 door hardtop 1972 Valiant Scamp 2 door ...

Upper Front Door Pads from Legendary Auto Interiors LTD® are made to fit and look just like the originals. Manufactured with vacuum formed PVC material on an original style foam and stamped steel core, these upper pads...

Distinctive Industries Deluxe door panels for 1962-63 Ford Falcon and Ranchero. These panels are correct reproductions of the originals with the correct Crush grain in 32 oz. vinyl, correct Mylar®, and correct heat sealed...

Replace the cracked, deteriorated or missing arm rest pads and bring new life to your interior. All our pads are foam filled and molded as original, with the metal insert encapsulated in foam and feature the correct...

Dielectrically heat sealed Cologne grain upper and woodgrain lower with chrome accent for a factory look and feel. Made in USA Appl ications: 1972 Charger with bucket seats or deluxe bench seat 1972 Charger SE with...

Our Restorer's Choice™ reproduction door panels for Mustang Convertible models with manual windows are manufactured to factory specifications by TMI™ with correct colors and trim combinations for proper fitment...

Reproductions of the original style door panels for 1988-92 standard IROC and Z/28 Camaro models. These door panels are designed and manufactured to OEM specifications using correct patterns, and include the correct matching...

Complement your custom interior with these Sport-R door panels from TMI. These custom door panels are manufactured with a molded fiberglass panel and finished with a hand-crafted vinyl and suede inserts with contrast...

Each door panel is reproduced to original specifications assuring you the quality you deserve. Be sure you?re getting the highest quality door panels for your Nova restoration. We offer factory original colors manufactured...

Distinctive Industries door panels for 1961-62 Ford Falcon and Ranchero. These panels are correct reproductions of the originals with the correct Crush grain in 32 oz. vinyl, correct Mylar®, and correct heat sealed vertical...

Distinctive Industries convertible quarter trim for 1966 Ford Galaxie convertible models. These quality reproduction covers are crafted from 32 oz. Sierra grain vinyl and are constructed just just like the originals.

Replace the discolored and worn door panel inserts on your 1981-89 Chevy or GMC truck. These inserts are sold in pairs and mount easily with pre-installed 3M tape.

OER® reproduction arm rest pads for 1981-91 Blazer, Jimmy, and Suburban models. Manufactured in soft covered vinyl and is easy to install. Reuse your original hardware. Made in USA Fits left hand (driver) side. ...

Legendary reproduction door panels for 1981 Camaro Berlinetta models with a deluxe interiors. Manufactured with dielectrically heat sealed Sierra grain vinyl with Derma grain insert. Door panels are made with the finest...

Reproduction deluxe molded door panels reproduced for the most discriminating Firebird restorer. Classic Industries has reproduced the original molded door panels using the latest methods and materials to assure you get the...

Each door panel is manufactured utilizing heat sealed original style stitching for an authentic factory appearance and comes with the lower door panel carpet in the correct color. Includes: New top rails Inner window felt p...

We make it easy for you to replace the upholstery and trim pieces to give your Mustang the look it deserves. This kit is designed to replace the cosmetic interior components for your standard interior. Save time and money by...

Add the ultimate custom look to your 1955-59 Chevy truck with these door panel inserts. Door panel inserts feature Encore velour bonded to a durable fiberboard backing and pre-punched holes⁕ on backside for the door...

It is recommend that when you install new door panels, you should also install new water shields so we've put a kit together for you.The quality reproduction door panels are the highest quality available, featuring correct...

When it comes to quality, OER® is the most trusted name in the restoration parts industry. Each product is manufactured and designed to replicate the original OE product exactly and this reproduction door panel carpet...

Legendary reproduction door panels for 1969 Camaro models with a standard interior. Manufactured with dielectrically heat sealed Madrid grain vinyl. Made with the finest materials and feature correct color, stitching and...

TMI Sport R door and side panels for 1964-68 Mustang. These custom molded panels come covered in either a gloss OE style vinyl or matte premium vinyl providing an updated stock look or a more modern feel. The contrast...

Distinctive Industries front door panels for 1965 Ford Fairlane 500 2-door hardtops. These high quality reproductions are correct reproductions of the originals featuring Sierra grain vinyl upholstery and heat sealed accent...

Custom Sport R rear side panels for 1968-69 Camaro coupe models with a standard interior. Features chrome moldings, suede inserts. Sold only as a pair. Made in USA

It is recommend that when you install new door panels, you should also install new water shields so we've put a kit together for you.The quality reproduction door panels are the highest quality available, featuring correct...

OER® reproduction molded door panels will replace existing cracked or worn originals. These finely crafted original style panels will fit all 1967 models with deluxe interiors and are the highest quality door panels on...

Reproduction front arm rest pad in the original style with a metal core wrapped in the correct Madrid grain vinyl. Sold only as a pair. A Restorers Choice Product.

Reproduction original style vinyl and velour door panels for all 1982-92 Firebird models. These door panels are designed and manufactured to factory specifications using correct patterns for an original appearance and include...

Be the envy of your local cruise night with this new panel set. This 1961 Impala door panel set comes complete with a dielectrically sealed upper portion and basketweave lower design. A brushed vinyl center creates the...

Complement your custom interior with these Sport X door panels from TMI. These custom door panels are manufactured on a molded fiberglass panel and finished with a hand-crafted vinyl cover with contrast stitching color and...

Legendary reproduction door panels for 1976 Camaro models with a deluxe interior. Manufactured with dielectrically heat sealed Madrid grain vinyl with Knitted insert. Door panels are made with the finest materials and feature...

Each door panel features Walrus grain vinyl and is manufactured utilizing heat sealed horizontal pattern stitching surrounded by authentic scroll detailing. The 1969 truck door panel also features the Chevrolet "Bow Tie"...

These vinyl rear side panels for 1967 Standard Camaros are manufactured using only the highest grade mill pebble grain, color matched vinyl for the best possible appearance, similar to the original 1967 standard rear side...

Correct reproduction of the original front arm rest bases for 1968-72 A-body models. These arm rest bases are manufactured with the correct shape, contours and a chrome finish as original. Sold as a pair. Mopar Authentic...

Features light-toned Madrid grain vinyl with dielectric embossing, dark-toned Madrid vertical center accents, chrome mylar bars and cracked ice lower door scuffs. Panels include new die-cut boards with pre-installed nail...

Features light-toned Madrid grain vinyl with dielectric embossing, dark-toned Madrid vertical center accents, chrome mylar bars and cracked ice lower door scuffs. Panels include new die-cut boards with pre-installed nail...

Each panel is manufactured utilizing heat sealed original style stitching for an authentic factory appearance Includes: New top rails Inner window felt pre-installed 2 upper panels 2 armrest covers 2 vertical windlace...