Classic Industries Restoration Parts and Accessories - Headlamps

This reproduction headlamp motor is manufactured for all 1967 Rally Sport Camaro models. Each motor is designed to open and close the headlamp door when the headlamp switch is activated. The motor assembly includes a...

Reproduction of the original front headlight bezels designed for use on 1963 Impala and Full Size models. Each bezel is manufactured in stamped aluminum including a bright polished finish offering an original fit and...

Replacing your original headlamp bezels with quality reproductions can help make your front end look great. Sold only as a pair.

Reproduction of the original 1973-74 Charger drivers side (LH) headlamp shield retainer. Manufactured in black injection molded ABS replicating the original factory part. The headlight shield retainer mounts to headlamp...

Reproduction of the original bellcrank assembly designed for use with 1969 Camaro Rally Sport models. Bell crank is manufactured in quality stamped steel to factory specifications replicating the original in design,...

The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old,...

Black LED 7" lights with HDR halos. The HDR features an unbroken ring of light compared to traditional LED style halos. This gives a high-end look while offering great luminosity. Perfect for updating the visibility of your...

Correct reproduction of the insulating rubber bumpers/stoppers used on the 1967-68 Camaro RS headlight door assemblies. These insulators dampen the noise caused by normal opening and closing operations of the door assemblies....

Reproduction of the original headlamp housing designed for use on standard 1969 Camaros. Manufactured to exact factory specifications, each housing replicated the original in fit, appearance and functionality. The headlight...

OER® reproduction of the original headlamp bezel designed for use on 1976 Nova Concours models. Each reproduction headlamp bezel is injection molded to exact specifications and features a correct chrome finish for an original...

Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...

Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...

The Search is Over: Just because you love your classic car doesn't mean you have to live with poor visibility at night. Until now, you had two options... keep it stock, or find a brighter set of headlights that would...

This panel repairs the passenger side headlamp inner housing for all 1956 Chevy passenger car models. Features the correct gauge sheet metal and matches the original contours. Made in the USA.

Replace your commonly rusty metal headlamp bucket shields with these excellent plastic reproductions. They can be painted any color to match your classic Chevy II/Nova. Sold in pairs only. Mounting hardware not included. Sold...

Eliminate your floor-mounted dimmer switch! This headlamp dimmer switch replaces the tilt-lever on your Ididit steering column and incorporates a momentary switch that will control your high beams.

Correct reproduction of the original floor mounted dimmer switch designed for use with various 1955-60 Chevrolet and GM models. Dimmer switch will replace the old or worn out original. For use on 12 volt models. {fitment}

Classic 5 ¾" Universal Hi/ Lo Beam LED Headlight Set. ECE certified with 4,000LM, 25W, 6,000k L.E.D. systems. The 1139 series is High/ Low Beam for use with a matching set of 153094 for quad-headlight vehicles. Features a...

Quad Hi-Low: In four-headlight systems it is common to have a dedicated low and high beam per side. With these splitters, You can now wire the system to work in parallel so that there are four low beams and four high beams.

Reproduction of the original headlamp housing designed for use on 1969 Camaro Rally Sport models. This housing attaches to the radiator support and holds the headlight components in place. Manufactured in stamped steel, each...

Replace your standard "yellow light" headlamps with this unique looking diamond cut halogen headlamp for increased visibility, safety and a custom look. Features a bullet shapped center reflector. This headlamp installs much...

Reproduction of the original RS Camaro headlight hinge that pivots the headlamp concealment door assembly when the headlights are activated. Manufactured in OEM zinc die-cast material. Hinge was installed on both the LH and...

Update your standard yellow light headlamp bulb with this high power halogen bulb and put more light on the road! This conversion headlamp features a lead crystal lens with "E" mark certified precision optics, stamped-steel...

Reproduction of the original front fender extension designed for use with 1970 Ford Mustang models. Each fender extension is manufactured to factory specifications, featuring correct contours and original style mounting...

Original GM NOS headlight bezel used for all 1978-1981 Z-28 Camaros. Each bezel is manufactured using injection molded ABS. Black as original for Z28 models. Original GM! Limited supply.

Upgrade the lights in your vehicle with these high quality 7? LED headlamps. These lights look unique and produce 50% more light than models of the past with easy plug and play installation. Uses H4 wire connector for quick...

Reproduction of the original headlamp bezel for 1982-86 Ford F150, F250, and F350 pickups, and Bronco models with rectangular headlights. Manufactured in injection-molded plastic to correct factory configuration featuring...

OER reproduction of the RH passenger side 1968 Charger headlamp door assembly. Each door is manufactured in a high pressure injection molding process just like the factory Mopar item. Injection molded in black, each door is...

Redline Lumtronix wire harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will be drawn...

Reproduction head lamp door for 1956 Ford F100, F250, and F350 Pickup Truck Models. This high quality reproduction bezel will fit the driver or passenger side headlight and features stainless steel construction with a quality...

This relay is mounted on the base of the power antenna motor. This relay may become inoperative over time due to excessive heat and electrical loads, leaving you without the use of its power antenna. Applications 1982-92...

These custom headlamp trim rings will give your 1969 Camaro a sleek, retro-high tech look. Machined from 6061-T6 billet aluminum, these trim rings offer direct bolt on installation and include installation hardware. These...

Reproduction of the original headlamp adjustors designed for use on 1968-71 A, B and E body Dodge and Plymouth models with a 2 headlamp system. Includes 4 correctly produced adjustors, 2 springs and 2 screws. Applications:...

Reproduction headlight retainer bucket adjusting spring for various Ford and Mercury models including Mustang, Fairlane, Cougar, and Comet. Manufactured from original Ford blueprints to exact specifications, each spring will...

Reproduction of the original headlamp bezel designed for use on all 1974-77 Camaro Z/28 models. Each bezel is meticulously manufactured using stamped aluminum as original with correct matt black finish. Will fit and install...

Reproduction headlight adjustment set for 1967 Shelby Mustang. Each set includes (1) spring, (2) adjuster screws, (2) nylon adjuster nuts. Perfect for rebuilding the original headlamp buckets on your 1967 Shelby Mustang.

Replacement LH (driver side) headlight assembly for 1991-96 Chevrolet Caprice, 1991-96 Buick Roadmaster, and 1990-91 Oldsmobile Custom Cruiser models. Each assembly features the transparent clear lens, housing, and lamp...

Reproduction of the original 5-3/4" round Lo-Beam headlamp bulb designed for 1969 Mustang as well as a variety of other Ford models with quad lighting. Features original style FoMoCo script originally found on the tungsten...

RedLine LumTronix headlamps allow 50% more light to shine through thanks to their crystal clear lenses and a special side lens that extends past the retaining ring. This side lens is a true a safety innovation and was...

Correct replacement screw for use with the center dash air outlet and other various parts for vehicles including sill plate, garnish moldings, mud flaps. 4.2mm x 1.41mm x .20 L. Applications: 1969 Camaro - center dash...

This bulb is a service replacements for your burned out original. Applications: 2006-11 Buick Lucerne 2006-07 Buick Rainier 2006-07 Buick Rendezvous 2006 Chevrolet Avalanche2006-12 Chevrolet Colorado 2007 Chevrolet...

Correct reproduction of the headlamp beam adjusting hardware set for 1977-78 Firebird models. Includes (8) nuts, (8) screws, and (4) springs. Pontiac Applications: 1977-78 Firebird

OER reproduction of the original 1970 Dodge Charger headlamp crank rod for use on models that included factory concealed headlamps. Includes a 2" slotted rod that acts as a pivot for the headlamp door. Manufactured in stamped...

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

RedLine LumTronix headlamps allow 50% more light to shine through thanks to their crystal clear lenses and a special side lens that extends past the retaining ring. This side lens is a true a safety innovation and was...

Reproduction of the original "square-hole" style mounting bucket designed for use on various 1958-82 GM models. This headlamp mounting bucket is designed to allow adjustment of the headlight beam and attaches to the headlamp...

Reproduction of the original headlamp bezel designed for use on all 1965 Chevy II and Nova models. This aluminum headlamp bezel is manufactured to factory specifications for an original appearance and fit. Sold individually....

Black LED 575 lights with original glass. Designed with thermo-regulated LED optical modules, this set draws only 1.1amp from your alternator. Update the looks and safety of your classic car with the slimmest 5.75? lights on...

Chromed steel headlamp dimmer switch pad with rubber inserts. Made in USA Note: For use on vehicles with floor mounted dimmer switches only.

OER reproduction of the 1973-74 Charger driver side, LH headlamp shield. Manufactured in silver injection molded urethane, just like the original factory item. This headlight shield mounts to headlamp bezel with a plastic...

Reproduction of the original headlamp door for use with 1964-66 Mustang. This headlight bezel mounts to the front of the fender and provides the body surface around the headlamp. Will fit all 1964-66 Mustangs. Sold...

OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on RH passenger side. Each headlight bezel is manufactured in black injection molded ABS plastic, and finished in argent silver in the...

Reproduction headlight bucket assembly for 1948-55 F-Series pickup trucks. This assembly will mount on either side of the vehicle and includes the mounting base, head light adjusting bucket, springs, and adjusting screws....

THIS BULB FITS:71/73 (FROM 6/1/71) DOME LIGHT Picture may vary slightly from actual product.

Replace your cracked, pitted or stone chipped right hand (passenger side) headlamp assembly with this high-quality reproduction unit from Classic Industries®. Don?t pay high prices for original equipment lighting. This...

LED projector headlamps provide the classic look while substantially upgrading the quality and spread of light. These 5.75? replacement bulbs feature glass lenses, 56mm Bi-LED projectors, and a slim flat base design, These...

Reproduction of the original headlamp assembly including most of the components needed to replace the headlamp section of the passenger side headlight area of your Mustang. Includes fender extension, headlamp bucket,...

Reproduction headlamp bezel screws for all 1956 models. Manufactured in the correct size and finish. One set required per vehicle.

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install.

Reproduction of the original headlamp bezel designed for use on 1987-90 Chevrolet Caprice models. Each bezel is manufactured to exact factory specifications for a perfect fit. For use on RH passenger side. See part number...