Product#: *X9858

29 Piece Clecos Sheet Metal Fastener Kit

This Cleco sheet metal fastener kit contains everything you need to secure sheet metal panels during the fit and alignment stage. The pliers can be used with all standard spring loaded fasteners and clamps. Kit includes: ...


Product#: T10020

Window Nut Tool

This OER« manufactured tool is designed to easily remove the guide plate nut on door or quarter window glass. Fits most models 1968-77. {specs} Note: Nut not included.

Window Nut Tool

MSRP $21.99 ea
Classic $19.99 ea

Product#: 140061

Blair Tools; Holcutter Set; 1/8" D.O.C.

Holcutters are not hole saws. They are precision ground, heat treated tools that easily cut through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. They can produce holes 3 times faster...


Product#: 34346-BBLP

1953-82 Chevrolet Corvette; Aero-Rivet Tool

Aero-Rivet Tool for 1953-1982 Chevrolet Corvette. From restoration to performance, we are proud to offer the highest quality parts for both classic and late models Corvettes.


Product#: PG2437

Pro Paint Gauge

To test the quality of a paint job the Pro Gauge can't be beat! Basically, it's a device which measures paint thickness. Factory paint is usually four to five mils in thickness (a mil is one thousandth of an inch). By...

Pro Paint Gauge

MSRP $93.99 ea
Classic $84.99 ea

Product#: 11092

Blair Tools; Rotabroach 8mm-20Mm Metric Cutter Set; 1/4" Depth of Cut

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...


Product#: A13574

Glass Molding Clip Installation Tool

This handy tool makes a difficult job much easier. This tool removes or installs the clips found on most exterior moldings and helps to avoid damage to the moldings or the surface that they are mounted to.


Product#: 14003

Blair Tools; Antenna/Access Holcutter™ Set

Holcutter™ is not a hole saw. It's a precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing and pushing through as do typical hole saws. The Holecutter™ can produce...


Product#: Y65800

Door Adjustment Tool with Handle

When it comes to adjusting the door hinges so they accurately align with the body of the car, you might find most novice restorers frustrated. You can now easily adjust the hinges without the aggravation of trying to align by...


Product#: S20017

Super Seam Buster (For Air Hammers)

This heavy-duty chisel allows you to easily separate spot welded or bonded panels. Save up to 15 minutes per panel replacement. Great for quarter panels, rocker panels and other pinch welded areas. Sharpened on two edges,...


Product#: FSK100

1967-74 Camaro/Chevelle/Nova/Firebird; P, B, & T Firewall Inspection Stamp Set

Under hood inspection stamp kit with correct P, B & T stamps. These were used on the assembly line to indicate when the different aspects of the car have been inspected after final assembly. {specs}


Product#: 146801

Blair Tools; Blair Holcutter™ 2-3/4" Cutter With 1/8" Depth Of Cut

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes...


Product#: 11081

Blair Tools; Rustproofer Cutter Set; With Standard Pilot

This Rotabroach® set is for rustproofing and cutting access holes. Rotabroach® Cutters are for precision hole making in sheet metal, frame materials, and plate stock up to 1/2" thick, whether Mild Steel,...


Product#: 11095

Blair Tools; Rustproofer Cutter Set; With Skip Proof Pilot

This Rotabroach® set is for rustproofing and cutting access holes. Rotabroach® Cutters are for precision holemaking in sheet metal, frame materials, and plate stock up to 1/2" thick, whether Mild Steel, Stainless...


Product#: 11083

Blair Tools; Paintless Dent Removal Access Hole Set

This Rotabroach® set is for cutting access holes, fabrication, removing spot welds and body work. Rotabroach® Cutters are for precision hole making in sheet metal, frame materials, and plate stock up to 1/2"...


Product#: 112173

Blair Tools; Rotabroach 3 Piece 17mm Replacement Cutter Set; 1/4" Depth of Cut

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in...


Product#: 112193

Blair Tools; Rotabroach 3 Piece 19mm Replacement Cutter Set; 1/4" Depth of Cut

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in...


Product#: 112203

Blair Tools; Rotabroach 3 Piece 20mm Replacement Cutter Set; 1/4" Depth of Cut

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...