3557260P - 1960-76 Dodge, Plymouth, Chrysler; Rebuilt 3rd Member Assembly; Power-Lok Posi; 3.55 Gear Ratio; 3-1/4" Yoke
3557260P - 1960-76 Dodge, Plymouth, Chrysler; Rebuilt 3rd Member Assembly; Power-Lok Posi; 3.55 Gear Ratio; 3-1/4" Yoke
Discontinued Item,
No Longer Available
- Product #: 3557260P
- CATEGORY: Differential
- BRAND: Ron's Machining Service
- SHIP TYPE: Overweight |
- Emissions Compliance: Not Applicable |
1960-76 Dodge, Plymouth, Chrysler; Rebuilt 3rd Member Assembly; Power-Lok Posi; 3.55 Gear Ratio; 3-1/4" Yoke
Professionally built 1960-76 Mopar 8.75" third member, includes all new components and housing. Comes completly assembled, ready to bolt into your vehicle. Every third member includes: a new 489 style 3rd member housing, Power-Lok Limited-Slip differential, Elite ring & pinion bearings, seals, and 7260 pinion yoke (3-1/4" width). This professionally built 3rd member is ready to install. Designed for 1960-76 Mopar 8.75" rear ends with 30 spline axles and 29 spline pinion. Can be used in all 489, 741 or 742 rear end applications. Please allow 1-2 weeks for your third member to be built.
Additional Information- Professionally built 8.75-inch third member, featuring a new 3rd member housing and all new components.
- Comes completly assembled, ready to bolt in.
- Designed for 1960-76 8.75" rear ends with 30 spline axles.
- Replaces all 489, 741 or 742 3rd member casting applications.
- New 489 style 3rd member housing.
- New Ring and Pinion set (Elite).
- New Posi Differential (Power-Lok).
- New Bearings.
- New 29 spline pinion yoke, 7260 u-joint size, 1.078 cap diameter, (3-1/4" width).
- Professionally assembled.
- 3.55 Gear Ratio.
- Requires 500 mile breakin.
- Recommended 80/90wt oil with Posi Additive.
- 1962 - 1971 Chrysler 300
- 1967 - 1975 Chrysler Imperial
- 1965 - 1976 Chrysler New Yorker
- 1965 - 1976 Chrysler Newport
- 1965 - 1976 Chrysler Town & Country
- 1963 - 1964 Dodge 330
- 1963 - 1964 Dodge 440
- 1963 - 1963 Dodge 880
- 1970 - 1974 Dodge Challenger
- 1966 - 1976 Dodge Charger
- 1965 - 1976 Dodge Coronet
- 1962 - 1976 Dodge Dart
- 1961 - 1962 Dodge Lancer
- 1965 - 1976 Dodge Monaco
- 1962 - 1973 Dodge Polara
- 1964 - 1974 Plymouth Barracuda
- 1962 - 1970 Plymouth Belvedere
- 1970 - 1974 Plymouth Cuda
- 1970 - 1976 Plymouth Duster
- 1962 - 1974 Plymouth Fury
- 1967 - 1971 Plymouth GTX
- 1968 - 1975 Plymouth Road Runner
- 1965 - 1974 Plymouth Satellite
- 1962 - 1964 Plymouth Savoy
- 1972 - 1976 Plymouth Scamp
- 1970 - 1970 Plymouth Superbird
- 1960 - 1976 Plymouth Valiant
- 1967 - 1967 Plymouth VIP
This product is discontinued and no longer available. No fitment can be displayed at this time.
Product Specifications
Shipping Dimensions- Weight: 89 Lbs
- Dimensions: L: 24" x W: 14" x H: 12"
- Ship Type: Overweight |
- Professionally built 8.75-inch third member, featuring a new 3rd member housing and all new components.
- Comes completly assembled, ready to bolt in.
- Designed for 1960-76 8.75" rear ends with 30 spline axles.
- Replaces all 489, 741 or 742 3rd member casting applications.
- New 489 style 3rd member housing.
- New Ring and Pinion set (Elite).
- New Posi Differential (Power-Lok).
- New Bearings.
- New 29 spline pinion yoke, 7260 u-joint size, 1.078 cap diameter, (3-1/4" width).
- Professionally assembled.
- 3.55 Gear Ratio.
- Requires 500 mile breakin.
- Recommended 80/90wt oil with Posi Additive.
- Not Applicable: Emissions control do not apply.
1960-76 Dodge, Plymouth, Chrysler; Rebuilt 3rd Member Assembly; Power-Lok Posi; 3.55 Gear Ratio; 3-1/4" Yoke
Professionally built 1960-76 Mopar 8.75" third member, includes all new components and housing. Comes completly assembled, ready to bolt into your vehicle. Every third member includes: a new 489 style 3rd member housing, Power-Lok Limited-Slip differential, Elite ring & pinion bearings, seals, and 7260 pinion yoke (3-1/4" width). This professionally built 3rd member is ready to install. Designed for 1960-76 Mopar 8.75" rear ends with 30 spline axles and 29 spline pinion. Can be used in all 489, 741 or 742 rear end applications. Please allow 1-2 weeks for your third member to be built.
Additional Information- Professionally built 8.75-inch third member, featuring a new 3rd member housing and all new components.
- Comes completly assembled, ready to bolt in.
- Designed for 1960-76 8.75" rear ends with 30 spline axles.
- Replaces all 489, 741 or 742 3rd member casting applications.
- New 489 style 3rd member housing.
- New Ring and Pinion set (Elite).
- New Posi Differential (Power-Lok).
- New Bearings.
- New 29 spline pinion yoke, 7260 u-joint size, 1.078 cap diameter, (3-1/4" width).
- Professionally assembled.
- 3.55 Gear Ratio.
- Requires 500 mile breakin.
- Recommended 80/90wt oil with Posi Additive.
- 1962 - 1971 Chrysler 300
- 1967 - 1975 Chrysler Imperial
- 1965 - 1976 Chrysler New Yorker
- 1965 - 1976 Chrysler Newport
- 1965 - 1976 Chrysler Town & Country
- 1963 - 1964 Dodge 330
- 1963 - 1964 Dodge 440
- 1963 - 1963 Dodge 880
- 1970 - 1974 Dodge Challenger
- 1966 - 1976 Dodge Charger
- 1965 - 1976 Dodge Coronet
- 1962 - 1976 Dodge Dart
- 1961 - 1962 Dodge Lancer
- 1965 - 1976 Dodge Monaco
- 1962 - 1973 Dodge Polara
- 1964 - 1974 Plymouth Barracuda
- 1962 - 1970 Plymouth Belvedere
- 1970 - 1974 Plymouth Cuda
- 1970 - 1976 Plymouth Duster
- 1962 - 1974 Plymouth Fury
- 1967 - 1971 Plymouth GTX
- 1968 - 1975 Plymouth Road Runner
- 1965 - 1974 Plymouth Satellite
- 1962 - 1964 Plymouth Savoy
- 1972 - 1976 Plymouth Scamp
- 1970 - 1970 Plymouth Superbird
- 1960 - 1976 Plymouth Valiant
- 1967 - 1967 Plymouth VIP
This product is discontinued and no longer available. No fitment can be displayed at this time.
Product Specifications
Shipping Dimensions- Weight: 89 Lbs
- Dimensions: 24" x 14" x 12"
- Ship Type: Overweight |
- Professionally built 8.75-inch third member, featuring a new 3rd member housing and all new components.
- Comes completly assembled, ready to bolt in.
- Designed for 1960-76 8.75" rear ends with 30 spline axles.
- Replaces all 489, 741 or 742 3rd member casting applications.
- New 489 style 3rd member housing.
- New Ring and Pinion set (Elite).
- New Posi Differential (Power-Lok).
- New Bearings.
- New 29 spline pinion yoke, 7260 u-joint size, 1.078 cap diameter, (3-1/4" width).
- Professionally assembled.
- 3.55 Gear Ratio.
- Requires 500 mile breakin.
- Recommended 80/90wt oil with Posi Additive.
- Not Applicable: Emissions control do not apply.
