Classic Industries Restoration Parts and Accessories - Rear End

Powertrax Grip PRO gear driven limited slip differential for Ford 8" rear ends with 28 spline axles. They deliver progressive and variable traction based off of throttle input, putting you are in control of how much traction...

Original style Hex head chrome plated bolts. These bolts are very high quality reproductions in dazzling bright finish. Made in USA

This billet steel yoke is manufactured specifically for Mopar differentials. Includes the yoke, and mounting hardware. Important: Use MM3307 u-bolt kit, Note: Uses 1350 series U-joint (sold separately) that have a 3.625"...

Motive Gear Performance ring and pinions for Ford rear ends. Extensive tested Motive Gear?s superior quality of components are the result of years of development, outstanding design, and state-of-the-art manufacturing...

The Moser Muscle Pak gives you a complete axle assembly ready to install in your Mopar. Assembly work has been completed by Moser's expert technicians, all you have to do is add gear oil! You get a brand new Moser stamped...

New reproduction 3/8" hex flange bolts for use with 1968-69 Dodge and Plymouth models. Set includes 10 bolts total and fits several vehicles. See description below to ensure a proper fit on your Mopar. Dodge Applications:...

Special plated bolts to complete the installation of your chrome rear end cover. Fits both 10 or 12 bolt covers. Sold as a set of 12.

If you?re looking for extreme traction, Classic Industries® has got it all locked up! This new positive-locking differential is a breakthrough in differential technology, delivering the most traction possible while still...

4-Link axle tabs for axle housing FM110713

4-Link axle tabs for axle housing FM110713

This dress-up differential cover bolt set features a flame logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

High performance Yukon ring and pinion gear set for Mopar 8.75" rear ends with the 1-7/8" pinion stem. Yukon uses the latest designs and manufacturing technologies to provide a strong and quiet running gear. Note:...

Reproduction of the original 1965-66 Ford Mustang driveshaft slip yoke, 28 spline, small block, 3 or 4 speed tranmissions with outer 3 3/16" outer yoke span. For use with 8 cylinder engines with manual transmissions. ...

This Currie 9 Plus 3rd member is ready to install in your 9" rear end. Uses a worm gear limited slip 3rd member includes: Iron "Sportsman" Gear Case With 3.062" Main Caps. Iron Big Bearing Pinion Support. Iron 1330 Series...

This dress-up differential cover bolt set features a flame logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

This dress-up differential cover bolt set features a RS logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

This dress-up differential cover bolt set features a RS logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

This is the same housing used in the complete axle assembly. Available with mono or multi leaf spring perches installed, or bare, to use in a custom rear suspension set-up. The 12 Bolt housings are newly cast nodular iron...

Powertrax Lock-Right performance locker for Ford 7.5? rear ends. These lockers replace the spider gears in your open differential carrier without affecting your ring and pinion settings. They can be installed with common hand...

Prevent costly damage by replacing rear axle bearings before they seize! Always check the bearings and seals whenever removing the rear drums for signs of wear. Sold individually. 2 required per vehicle.

Replacement wheel seal for various 1953-83 Ford and Mercury models including Galaxie, Cougar, Bronco, and F-Series Truck. This premium nitrile oil seal is a direct replacement for select Ford axles. Replaces Ford part#...

These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. ...

This is a differential drive pinion shim, for General Motors automobiles. It fits General Motors vehicles that were sold in the U.S., Europe and the UK. It's a genuine General Motors part with an OEM part number of 1394893....

The Moser Dana 60 Muscle Pak gives you a complete axle assembly ready to install in your Mopar. Assembly work has been completed by Moser's expert technicians, all you have to do is add gear oil! You get a brand new Moser...

Package includes; New Moser 9-inch OEM style made in the U.S.A. housing, with OEM located mounting provisions, seamless steel tubing (3" O.D., 1/4" wall), custom alloy 31 spline bolt-in axles, bearings, studs, seals, heavy...

Reproduction of the original positraction differential fill plug for vehicles equipped with either a 10 bolt or 12 bolt positraction differential. This plug will replaces the old or worn out original. 3/4". {fitment}

ECTED: Electronically Controlled Traction Enhancing Differential (pronounced "ek-ted") The ECTED Max™ is a revolutionary traction-technology product that switches between limited-slip and locker mode on the fly. When...

Making the car have better traction is what this is all about. The anti-squat bracket changes the geometry of the rear suspension by providing a different angle on the upper control arm. By changing this angle, the load...

Prevent premature bearing or brake failure! Replace cracked or deteriorated rear axle seals to keep gear oil and grease in the axle tube, where it belongs. Sold individually. 2 required per vehicle. Applications: 1958-59...

Prevent costly damage by replacing rear axle bearings before they seize! Always check the bearings and seals whenever removing the rear drums for signs of wear. Sold individually. 2 required per vehicle. Note: ...

When installing a new differential cover or reinstalling your original, always use a new differential cover gasket. We offer these high quality pre-formed gaskets for GM cars and trucks with 12 bolt rear differential covers....

Enhance the appearance of your rear end with ARP's stainless steel rear cover bolts. These bolts add a lustrous contrast to a painted OEM cover, compliment a chrome plated aftermarket version or add flash to that cast...

This is a quality replacement U-joint for your Mopar. Features: Forged and case hardened alloy steel crosses Heat-treated needle bearings Cold-formed radial bearing cups for 360° lubrication distribution Superior-quality...

Stock replacement driveshafts deliver power, consuming some of it in the process. A new steel shaft from Inland Empire Drive Line Service will reduce power loss and run smoother than the mass production, aging original...

Yukon ring and pinion installation kits for 1964-2004 Mustang. These kits are designed for gear installations on lower mileage vehicles where the carrier bearings and races can be reused. This kit uses Timken bearings and...

All Moser 9" Ford housings are made with new heavy duty housing cores, seamless steel tubing (3" O.D., 1/4" wall), new brackets, new housing ends, and new bushings. Bolt-in housing and axle packages include new housing,...

This differential cross shaft is for certain high numeric ratio gear sets that require special notched cross pins for proper installation. This particular cross shaft is for use with 12-bolt lock right differentials that are...

This dress-up differential cover bolt set features a RS logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

The Moser Muscle Pak gives you a complete axle assembly ready to install in your Mopar. Assembly work has been completed by Moser's expert technicians, all you have to do is add gear oil! You get a brand new Moser stamped...

Reproduction driveshaft slip yoke for 1962-67 Ford Fairlane and Falcon with 25 spline 3 or 4 speed manual transmissions. Works with 6 and 8 cylinder engines depending on year and transmission. Correctly designed for 25-spline...

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

Timken carrier bearing for installation of Yukon differentials in Ford 8? rear ends. Timken is the unquestionable leader in OE replacement roller bearings. Their steel roller bearing configuration allows for maximum...

Replacement 8-1/2 inch rear differential carrier gasket for various 1961-78 Ford and Mercury models including Mustang, Falcon, Comet, and Ranchero. This gasket installs between the differential and the axle housing. Works on...

Yukon Gear Grizzly high performance automatic mechanical locking differential for Mustang. They are available in multiple configurations for most common Ford rear ends. This locker features an 8620 case and forged 8620...

Replacement driveshaft slip yoke for 1963-67 Ford Mustangs and Falcons with 6 cylinder engines and 3 or 4 speed manual transmissions. For use with 6 cylinder engines with manual transmissions. Correctly designed for...

These u-joint strap kits are designed for use on stock and Yukon pinion yokes with 7260 u-joint size. Includes: two straps and four bolts. Made in the USA.

Did you know the rear axle housing was shipped to the assembly plant without the brake lines and fittings in place? A special piece of tape covered the vent hole to keep debris & moisture out during shipping. The plant then...

Motive Gear offers some of the toughest drivetrain components on the market today. Their products can be found in the winner's circle at NHRA, IHRA and NASCAR events. The superior quality components is the result of years of...

These u-joint u-bolt kits are designed for use on stock and Yukon pinion yokes with 1350 u-joint size. Includes: two u-bolts and four nuts. Made in the USA.

Yukon ring and pinion installation kits for 1964-2004 Mustang. These kits are designed for gear installations on lower mileage vehicles where the carrier bearings and races can be reused. This kit uses Timken bearings and...

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...

Replace your worn out or broken ring and pinion gears with new components from Motive Gear®. Master sets includes: Ring and Pinion gears Pinion Bearings Seal, Crush Sleeve and Nut Carrier Bearings Shim Kit Ring Gar Bolts...

Replace your worn out or broken ring and pinion gears with new components from Motive Gear. Master sets include ring and pinion gears, Timken pinion bearings, seal, crush sleeve and nut, Timken carrier bearings, shim kit,...

These grade 8 press-in Moser wheels studs are designed for rear axles with disc brakes. These are a great addition when installing Moser axles on your vehicle or just replacing your old wheel studs. Sold as a set of 10. One...

The Moser Muscle Pak gives you a complete axle assembly ready to install in your Mopar. Assembly work has been completed by Moser's expert technicians, all you have to do is add gear oil! You get a brand new Moser stamped...

This NHRA-legal driveshaft safety loop is custom fit for all 1966-70 Mopar B-Body models. This one-piece loop is fixture-welded with an oversized ring cut from DOM tubing for maximum clearance. Powder coated black for...

These Moser forged steel street axles for 10 bolt Chevrolet rear end are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE application. Made in the USA Note: Special order, must be prepaid....

Reproduction rear axle bumper for select Ford and Mercury models including Mustang, Cougar, Galaxie, and Maverick. This bumper is manufactured in durable rubber and replicates the original in fit and appearance. Sold...