Product#: 3899508

1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...

Product#: K4122

1947-2010 Windshield & Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

Product#: K348200

1968-77 GM; Window Crank Handle; Riveted Design; with Black Knob; Various Car & Truck Models

OER® reproduction window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile car and truck models. Manufactured in die-cast zinc featuring a chrome finish and a black knob that replicates the...

Product#: 17528D

1966-84 Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair; Various Models

Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....

Product#: T5BLACK

Door Jamb Vinyl Windlace ; Black ; Snap On Double Lip Style ; 20 Foot Roll

This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...

Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Product#: OER15

OER Trade Show Lanyard

Highly visible, quality lanyards are just what you need for any trade show event or car show. Features the bright OER® logo printed on both sides of 3/4" wide sublimation polyester. Includes an attached O-ring that will...

Product#: A7672

Headliner and Upholstery Installation Tucking Tool

This tool is great for tucking headliner or upholstery material into tedious channels without damaging the material. Headliner installation is almost never easy, but having the right tools can make it much easier. This tool...

Product#: A11774

1965-86 GM; Interior Door Panel Clip; White Nylon; Each

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...

Product#: 986068

1955-1980; GM, Chrysler, Ford; Seat Belt Retractors; Pair

Reproduction of the original seat belt restractors designed and installed on many early GM, Chrysler, and Ford models. Seat belt retractors were a dealer option designed to be easily installed in applications not originally...

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: R894

1962-81 GM Door Panel Clip Retainer Set ; 12 Piece Set

OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...

Product#: MD2307

1967-76 Dodge, Plymouth; Wheel Center Cap Set; For Magnum 500 / Road Wheels; with Installation Hardware; Set of 4

OER reproduction center cap assemblies for Magnum 500 and Road Wheels. Manufactured from die-cast zinc with a stamped aluminum "bullseye logo" insert, each cap features a chrome finish with the correct patterned center. Each...

Product#: 14927

1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction 9/16" coil spring spacer for various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not sit level from left to right. It...

Product#: 7026520

1955-83 Chevy, Buick, Pontiac, Olds; Cigarette Lighter Heating Element; Rochester Style

Correct reproduction cigarette lighter heating element for various 1955-83 models equipped with Rochester lighters. This element will replace the non-working original and get your lighter working again. Remove the old element...

Product#: T70781

Delco Energizer R59 Battery Topper Top Post

Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring the correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat...

Product#: K86130

OER® Black and Aqua Trunk Spatter Paint Quart

OER® Black and Aqua trunk spatter paint for the descriminating restorer who wants to get an exact color match or to completely restore your trunk to its former glory. This item is produced by the original manufacturer....

Product#: J250

OER Tri-Stic Retractable Pen with Black Ink

Ever wonder where all your pens go? Why not stock up on this eye catching inexpensive OER® black and yellow retractable pen.

Product#: J257

OER Soft Key Tag

This soft key tag is made of a sturdy material that is thick yet pliable, and comes with a spiral key ring.

Product#: ST779A

Bow Tie Exhaust Tip; Polished Stainless Steel; 9" Long; With 2-1/4" Inlet

This universal fit exhaust tip is designed to install on nearly any Chevrolet car or truck with 2-1/4" diameter tailpipe. Crafted from high-quality 304 stainless steel, it is stamped in to the shape of a Chevrolet Bow Tie and...

Product#: B2357A

2357A Amber Lamp Parking and Front Turn Signal Bulb

Replacement 2357A amber lamp bulb for the front parking and turn signal on various models that require a 2357A amber bulb.

Product#: WL200

1930-2010 Snap-On Windlace; Double Lip Style; Black; Sold by the Foot; Universal Style

This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...

Product#: 17529B

1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless

Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...

Product#: K146

1959-67 Buick, Chevrolet, Pontiac, Oldsmobile; Chrome Inner Door Handles; Pair

Reproduction die-cast inner door handles for various 1959-67 Buick, Chevrolet, Pontiac, and Oldsmobile full-size passenger car models as listed. Manufactured to factory specifications, each handle includes a highly polished...

Product#: *R406

Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...

Product#: TF900114

1930-2002 GM, Chrysler, Ford, Universal Under Hood and Trunk Lamp; with Bulb and Wiring

Add an under trunk or hood lamp to your classic with this universal lamp and wiring set. Designed for versatility, this set works with virtually any vehicle from 1930 and later. Each unit comes complete with the mounting...

Product#: T16000

Door and Window Handle Removal Tool

If you're going to remove the inner door panel or the window handle for repair or replacement, we recommend having this handy removal tool. Removing the door and window handles requires the expansion of the inner spring clip....

Product#: SW101

1960-84; GM, Chrysler, Dodge, Plymouth; Door Jamb Switch; Single Terminal; Each

Restore proper interior lighting function with this quality replacement single terminal door jamb switch for various models. Designed as a dependable service replacement, this switch activates the dome light when the door is...

Product#: *881358

1960-70 Ford, 1973-84 GM Truck; 16" Trico Style Wiper Blade Assemblies; Pair; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless

Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...

Product#: *K10000

Upholstery Installation Set - Pliers and Hog Rings

When it comes to installing upholstery in your classic, be sure you have the tight tools to get the job done. OER® offers this basic upholstery installation kit including high quality hog ring pliers and enough hog rings...

Product#: PP904

OER® Crimson Red Restoration Carpet Dye - 12 Oz Aerosol Can

Formulated to enhance and restore faded, worn or stained surfaces, our OER® Carpet Dye molecularly bonds to carpeting and dries in minutes for a finished result that will not wear off. A great product for restoring carpet...

Product#: ME7601

1970-79; Windshield Wiper Blade Set; 16"; Side Lock Style; with Button Refill Release; Polished Stainless; Various Models

OER reproduction of the Anco Rain-Master Style full frame, medium profile windshield wiper blades with push-button release for refill. These 16" Anco style wiper blades are manufactured from stamped stainless steel with a...

Product#: MT8517A

1991-94 Caprice / Impala SS Diamond Blue™ Car Cover

Designed for indoor use, this OER® Authorized Diamond Blue™ cover is manufactured using an economical single-layer non-woven material that offers excellent protection from dust and dirt penetration. Each cover is...

Product#: CX1807

Dash Instrument Socket and Bulb ; 5/8" ; Bayonet-Style

OER® reproduction of the original bayonet style instrument cluster lamp socket for use on most car and truck dashes. Each socket is manufactured injection molded ABS replicating the original in quality and fitment....

Product#: *R385

Nylon Door Panel Clip Set; Set of 12 Clips

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...

Product#: CM3004

1968-72 Camaro, Impala, Caprice, Chevelle. Station Wagon; Outer Door Mirror; Chrome: Smooth Style Base; with Gasket & Hardware; LH Driver Side; Various GM Models

Reproduction outer door mirror for various 1968-72 GM models. Each mirror is precision-manufactured in high-quality die-cast zinc, replicating the original design, fit, and finish for an authentic restoration. The mirror...

Product#: K556

1938-92 GM; Heater Hose Bracket Set; Various GM Applications

Keep your engine compartment organized and protect your heater hoses with this heater hose bracket set for various 1960s and 1970s GM vehicles. Designed to secure a pair of heater hoses to the inner fender skirt and...

Product#: C1004

1955-89 Chevy, GMC Truck, 1958-64 Impala Bel Air; Drive Shaft Support Cushion Bearing; OE Style

Correct reproduction of the original drive shaft support cushion bearing specifically designed for 1955-89 Chevrolet and GMC trucks that came with 2 piece drive shafts. The center support bearing is surrounded by a rubber...

Product#: K5241

1968-76 GM; Turn Signal, Tail Lamp, Side Marker, Park Lamp Lens Screw Set ; Chrome ; 4 Piece Set

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. Replacement lens screws used on various GM vehicles. Most 1965 and later GM vehicles used...

Product#: 219281

1/4"-20; Air Cleaner Wing Nut; Various Car and Truck Models

Correct wing nut used with all carburetors with 1/4" carburetor studs. After years of use your original air cleaner can become rusted or broken. This wing nut is the perfect replacement for a rusty or damaged original. Fits a...

Product#: K51499

1958-69 Trunk Spatter Paint; Black / Aqua; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: MD2462

1966-73 Chrysler, Dodge, Plymouth; Battery Hold Down Set; Various Models

Repproduction of the original battery mounting hold down set designed for use on various 1966-69 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction....

Product#: 15771000

1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole

OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: *R408

Speed Nut 1/4" Self Thread Cutting - 12 Piece Set

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...

Product#: CP1681C

1968-72 Chevrolet Chevelle, El Camino, Malibu, Monte Carlo; Muncie Shifter Handle; Flat Bar; Chrome; For 5/16" Coarse Thread Ball; For Bench Seat

The Muncie chrome plated flat bar stick is the upper bolt on handle that was originally supplied from the factories in Detroit for 1968-72 Chevrolet A-Body models that were "Muncie Equipped". The chrome flat bar stick,...

Product#: K915

Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...

Product#: PP801

OER Interior Paint; M10; Black; 16 Oz. Aerosol Can; Net Wt. 12 Oz.; Premium

OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds,...

Product#: K89543

OER Factory Black Paint; High Gloss Black; 16 Oz Aerosol Can (Net Wt. 12 Oz.)

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Comes in a 16 Oz. Aerosol Can (Net Wt....

Product#: 342754

1969-79 Camaro, Impala, Nova, Corvette; High Performance Fan Clutch; 7-1/4"

Reproduction, application specific, factory-style high performance thermal fan clutch for various 1969-79 Chevrolet vehicles with 7-1/4" diameter fan clutch. This reproduction is not a cookie-cutter universal part. Each fan...

Product#: 22729684

Supercharged Emblem; Rectangular; 4.3" x 0.7"; Each;

SUPERCHARGED emblem for various applications. Peel-and-stick application allows you to use this emblem in almost any location on any vehicle. Measures 4.3" long x 0.7" wide. Sold individually.

Product#: MD101

1968-70 Dodge, Plymouth B Body; Door Lock Knob Ferrules; Pair

Reproduction of the original door lock knob ferrules designed for use on 1968-70 Mopar B- body models. Each ferrule is manufactured in stamped stainless steel that replicates the original in quality and design. The ferrules...

Product#: 3827131

1963 Chevy Impala, Bel Air, Biscayne, Full Size; Upper Front Eyebrow Molding ; LH Driver Side

Restore the finishing detail of your front grille assembly with this reproduction upper eyebrow extension molding for 1963 Impala and full-size Chevrolet models. Manufactured from quality stamped aluminum, this molding is...

Product#: *K10010

Upholstery Installation Set with Heavy Duty Pliers and Hog Rings

This quality upholstery installation kit includes 60 hog rings and professional style heavy duty pliers. Total of 60 hog rings come in each kit to be applied as needed, more hog rings are available for purchase separately but...

Product#: C442

1967-1991 GM; Rear Coat Hooks; Louvered Style; Black; with Screws; Pair

Reproduction of the original style coat hanger hooks designed for use on a variety of 1967-91 General Motors vehicles. Manufactured in quality injection-molded ABS to original factory specifications. These coat hooks feature...

Product#: WT5655C

1967-81 Chevrolet; Rally Wheel; Silver Powder Coated; 15" x 7"; 4-1/4" Back Space; 5 on 4-3/4" Bolt Pattern

Restore the classic muscle car appearance of your Chevrolet with this reproduction 15" x 7" Rally wheel. Manufactured from quality steel, this wheel accurately replicates the original GM Rally wheel design and appearance...

Product#: 20189751RD

1972-81 Camaro, Firebird; Inner Rear Lower Side Panel; Red; RH Passenger Side

Reproduction rear inner side panel assembly designed for use on 1972-81 Chevrolet Camaro and Pontiac Firebird models. Over time, exposure to sunlight and damaging UV rays can cause original panels to crack, fade, or...

Product#: K86131

OER® Gray and White Trunk Spatter Paint - Quart

OER®Gray and white trunk spatter paint for the descriminating restorer who wants to get an exact color match or to completely restore your trunk to its former glory. This item is produced by the original manufacturer. One...

Product#: *R386

Nylon Door Panel Clip Set; 8 Piece

These clips are designed to attach to the lower door panel. Once installed, the panel is pushed directly into the door frame.The nylon clips will keep the door panel positioned properly after installed. Applications:...

Product#: *748825

Lighter Element and Knob; Casco Style; For 7/8" Receiver; With Flame Icon

Universal fit Casco type cigarette lighter assembly designed for a variety of models. Includes a vintage style reproduction knob and a 7/8" Casco style element. Designed as a universal fit item. Will fit virtually any Casco...