Product#: 748831

1970 Dodge Charger; Inner Rear Trunk Tail Lamp Panel Cover

Reproduction rear trunk tail lamp cover for 1970 Dodge Charger models. Each panel is vacuum formed to correct factory specifications and features the proper depth, configuration, and mounting points for an authentic...

Product#: K51496

1970-1982 GM: Trunk Spatter Paint; Black / Gray; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51498

Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51499

1958-69 Trunk Spatter Paint; Black / Aqua; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...

Product#: K51497

Trunk Spatter Paint Clear Topcoat; 16 Oz Aerosol Can; Net Wt. 16 Oz.

After years of use your trunk area is probably in poor condition due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. This is the...

Product#: 9781957

1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-3/4", Large

Correct reproduction rubber lug wrench sleeve for the tirejack and wrench assembly. This special rubber storage sleeve was found originally on many GM car models. Manufactured from quality rubber material, this sleeve slides...

Product#: 9659628

1970-73 Camaro; Trunk Lock Bezel ; Chrome

Manufactured in quality zinc die-cast metal and chrome plated replicating the factory original bezel. Replace the old , worn out or rusted bezel with this quality reproduction. Will fit and install as original. Refer to part...

Product#: *K51494

OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51492

OER Gray and White Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51490

OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...

Product#: *K51491

OER Black and Aqua Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Product#: *K51493

OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: *K51495

OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

Product#: 9728247

1962-91 Buick, Chevy, GMC, Pontiac, Oldsmobile; Door Lock Cylinder Retainer; Each; Various Car & Truck Models

Reproduction of the original type lock cylinder retainer required on various 1962-91 GM models. If you're replacing your lock cylinder, it will probably be necessary to replace the cylinder retainer. Manufactured in spring...

Product#: 4753019

1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models

This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...

Product#: 9785616

1955-81 Buick, Cadillac,Chevy, Pontiac, Oldsmobile; Spare Tire Hold Down Nut; 5/16"-18 Thread; 3.88" wide; Zinc Finish; Various Models

OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....

Product#: 4471426

1965-72 Chevrolet, Oldsmobile; Trunk Lock Cylinder Gasket; Molded Rubber; Various Models

Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...

Product#: 153580

1959-72 Buick, Chevy Pontiac, Oldsmobile; Trunk Latch Mounting Bolt Set; Various Models

Reproduction of the original 1/4-20 x 5/8 Hex Head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...

Product#: 20066400

1965-74 GM; Spare Tire Hold Down Rod Anchor Plate; Various GM Models; Reproduction

Be sure to protect your spare tire from unnecessary movement by making sure the spare tire anchor plate is correctly mounted. Acts as a clamp by holding the spare tire hold down rod in place after the nut is tightened....

Product#: MD2114

1960-76 Dodge/Plymouth; Rubber Body and Trunk Plug; 1-7/8"; Each

Reproduction of the original style body and trunk rubber plug designed for use on most 1960-76 Dodge or Plymouth models where a 1-7/8" hole plug is required. Manufactured in quality rubber material for an original appearance,...

Product#: TR1403S

1961-1977 Various Buick Vehicles Skylark, Riviera, Electra; Trunk Accessory/Auxiliary Mat; GM# 981403

Reproduction OEM accessory rubber trunk mat with Buick shields logo for 1961-77 Buick models including Skylark, Electra and Riviera. This is an auxiliary mat that goes on top of the felt covering. This is an officially...

Product#: K941

1962-81 Trunk Lock Cylinder Gasket ; Die-Cut Replacement

Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...

Product#: 9868540

1970-81 Camaro, Firebird; Trunk Hinge Torque Rod; with Rear Spoiler; RH Passenger Side

Reproduction of the original rear spoiler trunk hinge torque rod designed for use on 1970-81 Camaros with rear spoilers. This torque rod is essential for keeping pressure on the trunk hinge assembly which will maintain the...

Product#: 9781956

1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-1/4"; Standard Size; Various Models

Correct reproduction rubber lug wrench sleeve for the tirejack and wrench assembly. This special rubber storage sleeve was found originally on many GM car models. Manufactured from quality rubber material, this sleeve slides...

Product#: 9868539

1970-81 Camaro, Firebird; Trunk Hinge Torque Rod; with or w/o Rear Spoiler; LH Driver Side

Reproduction of the original rear spoiler trunk hinge torque rod designed for use on 1970-81 Camaros with rear spoilers. This torque rod is essential for keeping pressure on the trunk hinge assembly which will maintain the...

Product#: A8100337

1982-92 Camaro, Firebird; Rear Hatch Panel Trim Screw; Medium Dark Gray

Reproduction of the original interior trim fastener for the rear hatch cargo panel on 1982-92 Camaro and Firebird models. This trim screw is manufactured from correct injection molded ABS plastic material in the original...

Product#: KW693

1967-69 Camaro, Firebird; Trunk Lid Torque Rods; with Spoiler; RH & LH; Pair

Correct reproduction trunk lid torque tension rods for 1967-69 Camaro and Firebird models equipped with a rear spoiler. Each rod is manufactured to precise factory specifications and features the correct contours and...

Product#: 5717538

1961-64 Chevrolet; 1963-64 Oldsmobile; 1963-65 Buick; Full Size; Trunk Lid Hinge Arms; Hardtop, Sedan Models; RH & LH; Pair

Reproduction trunk lid hinge arms for 1961-64 Chevrolet, 1963-64 Oldsmobile, and 1963-65 Buick full size hardtop and sedan models (will not fit convertible models). These trunk lid hinge arms are manufactured to factory...

Product#: A8100334

1982-92 Camaro, Firebird; Rear Hatch Panel Trim Screw; Black; Each

Reproduction of the original interior trim fastener for the rear hatch cargo panel on 1982-92 Camaro and Firebird models. This trim screw is manufactured from correct injection molded ABS plastic material in the original...

Product#: 9731275

1971-90 Camaro, Firebird, Impala, Nova; Trunk Floor Pan Steel Access Plug; Various Models

Reproduction rear cross rail and trunk floor access plug originally installed on 1971-81 Camaro, Firebird, and other GM models as listed. Plugs are manufactured in steel to factory dimensions and will replace the original...

Product#: 20309167B

1982-92 Camaro, Firebird; Rear Window Hinge Bolt with Nut; Steel; Gloss Black; Set of 4

Reproduction steel rear window hinge bolt and retaining nut for 1982-92 Camaro and Firebird models with rear lift-up window. The hex stud bolt is manufactured in steel with a plastic cap as original. Stud and nut are...

Product#: A8100335

1982-92 Camaro, Firebird; Rear Hatch Panel Trim Screw; Camel Tan

Reproduction of the original interior trim fastener for the rear hatch cargo panel on 1982-92 Camaro and Firebird models. This trim screw is manufactured from correct injection molded ABS plastic material in the original...

Product#: A8100336

1982-92 Camaro, Firebird; Rear Hatch Panel Trim Screw; Red

Reproduction of the original interior trim fastener for the rear hatch cargo panel on 1982-92 Camaro and Firebird models. This trim screw is manufactured from correct injection molded ABS plastic material in the original...

Product#: 20309167

1982-92 Camaro, Firebird; Rear Window Hinge Bolt with Nut; Steel; Gloss Black; Each

Reproduction steel rear window hinge bolt and retaining nut for 1982-92 Camaro and Firebird models with rear lift-up window. The hex stud bolt is manufactured in steel with a plastic cap as original. Stud and nut are...

Product#: A8100343

1982-92 Camaro, Firebird; Rear Hatch Panel Trim Screw; Medium Blue; Each

Reproduction of the original interior trim fastener for the rear hatch cargo panel on 1982-92 Camaro and Firebird models. This trim screw is manufactured from correct injection molded ABS plastic material in the original...

Product#: B9287

1961-65 GM Full size; Trunk Lid Hinges; Hardtop, Sedan Models; RH and LH; Pair

Reproduction of the original rear trunk lid hinges for use with 1961-65 GM Full Size hardtop and sedan models (will not fit wagon or convertible models). The trunk lid hinges are manufactured to correct factory dimensions...

Product#: K946

1970-73 Camaro; Trunk Lock Bezel Gasket ; Molded Rubber

Correct OER® reproduction of the original trunk lock bezel molded rubber gasket for use with all 1970-73 Camaro models. This molded gasket is used to seal the trunk lock bezel and help keep water and other elements from...

Product#: 9868538

1970-81 Camaro; Firebird: Trunk Hinge Torque Rod; without Rear Spoiler; RH Passenger Side

Reproduction of the original rear spoiler trunk hinge torque rod designed for use on 1970-81 Camaros without rear spoilers. This torque rod is essential for keeping pressure on the trunk hinge assembly which allows the trunk...

Product#: GN110886

1981-87 Regal; Trunk Lock Cylinder Cover

Reproduction trunk lock cylinder cover for 1981-87 Regal models. Features adhesive backing for easy installation.

Product#: 8742310

1969 Pontiac Firebird; Trunk Lock Bezel; with Hardware; GM Licensed

Add the finishing touch to your 1969 Firebird restoration with this quality reproduction trunk lock bezel. Features two studs and includes the 10-24 fastening nuts for mounting. Each die-cast bezel is polished to perfection,...

Product#: 748830

1969 Dodge Charger; Inner Rear Trunk Tail Lamp Panel Cover

Reproduction rear trunk tail lamp cover for 1969 Dodge Charger models. Each panel is vacuum formed to correct factory specifications and features the proper depth, configuration, and mounting points for an authentic...

Product#: 2838620

1968-69 Dodge B-Body Hardtop Trunk Lid Torque Rods

These reproduction trunk lid torque rods are manufactured from the correct gauge steel to factory specifications with the correct length and ends as original. Mopar Authentic Restoration™ Product Applications: 1968-69...

Product#: 4544749

1966 Olds 88, Dynamic, 1967-68 Camaro, Firebird, Trunk Lock Retainer Clip

Reproduction trunk lock retainer for 1966 Olds 88, Dynamic, and 1967-68 Camaro and Firebird models. Each retainer is manufactured from stamped steel and coated for rust prevention. Will replace the worn out or missing...

Product#: BP1181Z

1970-72 Oldsmobile 442, 1970-72 Cutlass, F85, Pontiac Tempest, Lemans, GTO; Hood Release Latch

Hood primary hood release latch for 1970-71 Oldsmobile 442 and 1970-72 Cutlass, F85, and 1970-72 Pontiac Tempest, Lemans, and GTO models. This latch is designed for applications that have an inside hood release cable. This...

Product#: 8733875

1969 Camaro; Trunk Lock Retainer

OER reproduction trunk lock retainer for 1969 Camaro models. Each retainer is manufactured in quality stamped steel to the original configuration replicating the original in design, appearance, and fitment. Features and...

Product#: F12327

1969 Firebird, Trans Am; Trunk Lock Shaft And Swivel

Reproduction of the original trunk lock shaft and swivel unit designed for use specifically on 1969 Firebird and Trans Am models. This trunk lock shaft and swivel attaches to the trunk lock and features a swivel with a ball...

Product#: TR9579T

1964-68 Oldsmobile Cutlass, 442; Bumper Jack; Hold Down; Bracket Kit

Reproduction bumper jack hold down bracket kit for 1964-68 Oldsmobile Cutlass and 442 models. This is the bracket that bolts to the trunk floor and secures the jack assembly in place. This is a rare part and can be hard to...