Classic Industries Restoration Parts and Accessories - Door Components

Reproduction rear cargo door latch for 1985-91 Blazer/Jimmy and Suburban models. This latch mechanism mounts on the lower side of the left hand cargo door.

Reproduction rear cargo door latch for 1985-91 Blazer/Jimmy and Suburban models. This latch mechanism mounts on the upper side of the right hand cargo door.

Reproduction rear cargo door latch for 1985-91 Blazer/Jimmy and Suburban models. This latch mechanism mounts on the lower side of the right hand cargo door.

Reproduction window adjustment plate set for 1955-57 Chevrolet 4 door hardtop models. Each set includes chrome plates, gaskets , screws and washers.

Reproduction of the correct inner door release mechanism for use on the drivers door. Years of abuse can cause this release mechanism to fail or wear out. Replacing it can help the door to open more effectively. For...

Reproduction of the correct inner door release mechanism for use on the drivers door. Years of abuse can cause this release mechanism to fail or wear out. Replacing it can help the door to open more effectively. For...

Door hinge pin and bushing set designed to replace and repair the door hinge pins and bushing allowing the hinges to work as intended. Includes 4 hardened shoulder pivot pins, and 8 sintered bronze bushings. Will repair the...

Reproduction of the original quarter window rollers designed for use with 1967-72 Dodge, and Plymouth A-Body models. Each quarter window roller set includes the necessary hardware and rollers to repair the RH and LH quarter...

Reproduction of the original outer door frame panel designed for use with 1947-54 Chevrolet and GMC truck models. Each complete door frame panel is manufactured in stamped steel to original factory specifications featuring...

Reproduction of the original outer door frame panel designed for use with 1947-54 Chevrolet and GMC truck models. Each complete door frame panel is manufactured in stamped steel to original factory specifications featuring...

Reproduction window regulator roller with 1/4" rivet for 1955-57 Chevrolet models. Three required per door. Sold individually.

Genuine GM Front Door Window Regulator Motor: This is the correct original replacement regulator motor for use with a wide variety of GM models. Replace your non working motor and add life back into your electric windows!...

Reproduction of the original door hinge designed for use with 1955-57 Chevrolet Bel Air, 150, and 210 models. Each hinge is manufactured in heavy duty stamped steel to factory specifications offering an authentic appearance...

Reproduction of the original power window switch designed for use on 1969-77 Mopar Dodge, Plymouth and Chrysler models designed to install in the drivers side front door. This switch is manufactured with original style...

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned. Applications: 1967-69 Camaro models 1970-78 Camaro models with short lock cyli...

Reproduction of the original rear outer door handles designed for use with 1968-79 Chevy II and Nova 4 door models. Replace your original pitted or worn-out outer door handles and give your restoration the look it deserves...

OER® reproduction of the original interior handle washer plate for use on most 1947-87 GM models without power windows. Manufactured in injection molded ABS plastic material as original, this plate prevents the window crank...

Reproduction of the original door vent window assembly designed for use with 1955-1959 Chevrolet and GMC truck models. Each glass assembly is manufactured to OE specifications replicating the original in quality, fitment, and...

Reproduction of the original style outer door scuff plates designed for use with 1952-59 Chevrolet and GMC trucks. Each plate is manufactured in quality die-cast zinc and finished in a bright chrome plating. Replace your...

Reproduction "first-design" die-cast outer door handle for 1979-93 Mustang, 1979-86 Mercury Capri and a wide variety of additional Ford and Mercury models. Manufactured in die-cast metal to 1979-84 Ford factory...

Reproduction of the original roof drip rail for use with 1947-54 Chevrolet and GMC pickup models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Reproduction driver side door latch assembly for various 1962-67 Ford and Mercury models including Falcon, Fairlane, Comet, and Bronco. This direct replacement latch is constructed of high-quality materials and will fit and...

Bring style to your truck and set it apart from the rest with a set of GSI billet door handles. Ready to be installed right out of the box, each set is CNC machined from billet aluminum and includes left and right door...

Door latch striker to door jamb mounting screw package for 1949-53 Buick, Cadillac and Olds models. Screws with countersunk flat heads and lock washers are 1-5/16" long and have 5/16"-24 thread as original. Set of six screws...

Reproduction of the original F-body upper door hinge design for use on 1982-92 Camaro and Firebird models. Each door hinge is manufactured by OER® to exact specifications ensuring an perfect fit. Manufactured in cast...

Reproduction of the original door relay mechanism designed for use with 1967-71 Chevrolet and GMC truck models. Door mechanisms are manufactured to factory specifications featuring correcy mounting locations. Designed to...

Original GM power front door window regulator without motor for 1992-00 models. Replace your worn out window regulator and help bring your window back to working condition. Fits Right Hand (Passenger) Side. ...

Reproduction of the original lower glass channel for 1967-72 Chevrolet and GMC truck models. Each channel is manufactured to original factory specifications offering an original appearance and fit. This is lower channel that...

Billet aluminum exterior door handle for various 1964-77 Ford and Mercury models including Bronco, Falcon, Comet, and Econoline. These precision machined 6061-T6 aluminum door handles have a ½?? lower profile than stock and...

Replace your worn door locks with a coded door lock set complete with 2 coded lock cylinders, 2 OEM keys, lock pawls and retaining brackets. Applications: 1970-74 Barracuda 1970-74 'Cuda 1970-74 Challenger Note:Must use...

Our deluxe door lock rod kit includes the 3 primary control rods from our basic sets, plus the longer control rod that connects the inside door handle to the door latch along with all it's support brackets and mounting...

Reproduction of the original upper door hinge designed for use with 1967-72 F100, F250, and F350 pickup truck models. Each door hinge is manufactured in quality stamped steel construction replicating the original in design,...

This reproduction door frame set is just what you need to replace damaged or worn out window frames on your classic 1967-68 Ford Mustang. These door window frames are manufactured to factory specifications and replace the...

This complete lock set is designed to replace your ignition, door, and trunk lock assemblies. Each set comes complete with coded locks with Pentastar keys, pawls, clips and gaskets. Note: Not for fiber-optic, tilt &...

Reproduction driver side door latch striker plate assembly for 1953-55 Ford F100, F250, and F350 Pickup Trucks. This direct replacement assembly includes the cast striker plate housing, spring, pin, and nylon pawl/catch....

Correctly stamped reproduction of the original 1968-70 striker shim plate designed for use on B-Body models. Manufactured in die-stamped steel with zinc plating for corrosion resistance. Designed to shim the door striker...

OER® Authorized reproduction of the original door latch assembly designed for use on various 1963-64 GM B-Body 2 door hardtop and convertible models. Each assembly is manufactured in quality steel components that...

Reproduction of the passenger side front door window regulator for 1962-65 Chevy II/Nova all 2 door models. Includes correct splined shafts made to original specifications. Manufactured with high quality steel and are stamped...

Reproduction of the original door lock actuator unit designed for use on 1999-04 Mustang and other models. Each actuator is manufactured to original factory specifications featuring correct mounting points and an OE style...

Reproduction door hinge bolt kit with flanged head for 1969-73 Mustang models. Each kit includes 12 bolts with washers, enough to do one door. Two kits are required per vehicle.

This quality reproduction outer door handle set is manufactured with a high quality triple chrome plating for an authentic appearance. Set includes: 2 outer door handles 2 push buttons with springs Gaskets Mounting hardware ...

Reproductions door relay mechanism for 1964-66 models. Manufactured to factory specifications to fit and install as original. Each door relay mechanism will replace the original exactly.. Fits Left Hand (Driver) Side.

Reproduction of the original inner door window frame for use with 1947-50 Chevrolet and GMC truck models. Each door window frame unit is manufactured to OE specifications replicating the original in design and fitment. This...

Reproduction of the original front door hardware designed to replace the won out or damaged originals for 1973-74 Mopar E body models. This 22 piece hardware set services the inner door components associated with the proper...

Reproduction of the original window regulator roller that mounts into the arm of the window regulator. The roller assembly is the part that slides in the channel, allowing the window to roll up and down smoothly. If the...

Often broken, this is the arm on the lower door hinge with the notches cut out that the detent roller rides in. Also the door hinge tension spring latches into this piece. Sold individually.

Reproduction of the original latch assembly constructed of high-quality polished stainless steel for a bright custom appearance. Door lock striker plates will attach to the door and grab the door latch striker to hold the...

OER® reproduction of the original front door latch assembly designed for use on various 1959 GM B-Body 2 door hardtop and convertible models. Door latches are manufactured ro factory specifications replicating the...

Reproduction of the original outer door handles designed for use on 1956-57 Chevrolet passenger car 4-door hardtop models. Outer door handles are manufactured in quality die-cast zinc that replicate the original GM handles....

Replace a broken or missing door window frame with this quality reproduction that is designed to replace your originals exactly. The door window frame helps support the glass when installed in the door. Glass not included.

Reproduction of the original lower door hinge designed for use with 1980-96 F100, F150, F250, and F350 Pickups and Bronco models. Each door door hinge is manufactured in stamped steel to factory specification replicating the...

Reproduction of the original vent glass window frame designed for use on 1967-68 Mustang and Cougar models. Each frame is manufactured in zinc die cast metal, chrome plated and polished to perfection. Correct for 1967 LH...

This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...

Reproduction door hinge position spring for 1973-86 Chevrolet and GMC C/K truck, 1987-91 R/V truck, and 1973-91 Blazer and Suburban. The spring is designed to hold the door in the position when the door is open. Sold...

Original GM replacement front door latche for 1988-02 models. Your door will open more easily and close more securely by replacing the worn out original. Fits Left Hand (Driver) Side. Applications: 1988-94 Chevrolet S10...

Reproduction of the original door lock knob ferrules designed for use on 1964-1976 Mopar B- body models. Each ferrule is manufactured in injection molded ABS that replicates the original in quality and design. The ferrules...

Reproduction of the original lower body side front door hinge designed to replace the worn or damaged original for 1988-1998 Chevrolet and GMC Pickup, Blazer, Jimmy, Suburban, Tahoe, and Yukon models. Each door hinge is...

Reproduction of the original door window frame designed for use with 1966-77 Ford Bronco models. This direct replacement frame will install just like the original using the existing hardware. Replaces Ford part#...

This lock set for your doors and trunk includes 2 door lock cylinders, trunk lock and 2 pre-cut keys. Lock cylinder retainers which are used to hold the lock cylinder in place, and gaskets are also included.

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 door lock cylinders 1 glove box cylinder 1 trunk lock cylinder 2 pre-cut...