Product#: GN110663

1955-87 GM Car and Truck; Door Lock Pawl; Half Moon Style; Fits Short D-Shaped Shaft

Door lock pawl retainer for various 1955-64 GM passenger car and 1967-91 GM truck models. Mounts at the end of lock cylinder firmly holding the pawl/lever in place. Fits the short shaft D-shaped lock cylinders. LH or RH.


Product#: TK179

1955, 1957 Glove Box Trunk And Door Lock Set

This compreshensive lock set for 1955 and 1957 full size Chevrolet models includes the glove box, door, and trunk lock cylinders all configured to a single, hex-head style key.


Product#: 14910

1973-87 Chevrolet/GMC Truck Door Lock Pawl; LH

Reproduction door lock pawl for 1973-87 Chevrolet and GMC models. This pawl mount to the back of the door lock and actuate the latch. Fits Left Hand (Driver) Side.


Product#: 14911

1973-87 Chevrolet/GMC Truck Door Lock Pawl; RH

Reproduction door lock pawl for 1973-87 Chevrolet and GMC models. This pawl mount to the back of the door lock and actuate the latch. Fits Right Hand (Passenger) Side.


Product#: TK135A

1962-68 Door and Trunk Lock Set with Original Style Key

Complete set designed to replace your door and trunk lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and trunk cylinders. Includes door lock retainers, gaskets and...


Product#: CL1102

1970-78 Camaro with Long Cylinder Door Lock Pawl; RH

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned.


Product#: 7762203

1959-1993 GM; Door Inside Locking Rod Clip; Various Models; Each

This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...


Product#: 609833A

1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Bright Finish

Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with bright finish face finish, two generic logo keys, cylinder...


Product#: K4013

1969-2002 Nylon Rod Clip, Fits 5/32" Rod Diameter; 1/4" Hole Size; LH Driver Side; Varius Models

Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...


Product#: TK135

1962-94 GM; Door and Trunk Lock Set; with Pre-Coded Late Style Key

Complete set designed to replace your door and trunk lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and trunk cylinders. Includes door lock retainers, gaskets and...


Product#: TK1018

1971-87 Chevrolet, Buick; Door Lock Set; Bright Finish; With Pre-Coded GM Logo Keys; RH and LH Doors

Reproduction of the original style door locks, hardware, and pre-coded keys for use with various 1971-87 General Motor models. This complete set designed to replace your door lock assemblies. Each set is produced with...


Product#: 312284

1967-72 GM Truck Ignition/Door/Glove Box Lock Set; Includes 1969-72 style keys

Designed to replace your 1967-72 truck ignition, door and glove box lock assemblies. This set will replace your outer door lock cylinders and the ignition lock cylinder. Each set is produced with "coded" cylinders and 2...


Product#: TK109

1962-86 GM Car, Truck; Door Lock and Key Set; Pre-Coded; with 1969-86 Style Round GM Logo Keys

Complete door locks and keys for many 1962-86 GM vehicles. When it comes to replacing the door locks, this kit makes it easy. Each set provides 2 pre-coded lock cylinders, 2 pre-cut GM logo keys, lock retainers and gaskets....


Product#: 9728247

1962-91 Buick, Chevy, GMC, Pontiac, Oldsmobile; Door Lock Cylinder Retainer; Each; Various Car & Truck Models

Reproduction of the original type lock cylinder retainer required on various 1962-91 GM models. If you're replacing your lock cylinder, it will probably be necessary to replace the cylinder retainer. Manufactured in spring...


Product#: TK129A

1968 Camaro, 1967-68 Firebird Door, Glove Box and Trunk Lock Set with Original Style Key

This comprehensive kit will allow you to replace all the major lock cylinders (door, glove box and trunk) using just one pre-cut key. Each kit is a convenient and easy way of replacing your original locks without going...


Product#: 330485

1973-91 Chevrolet, GMC Truck, Blazer, Jimmy, Suburban; Door Lock Knob Ferrule; Each

Restore the finishing detail of your interior with this quality OER reproduction door lock knob ferrule for 1973-91 Chevrolet and GMC truck, Blazer, Jimmy, and Suburban models. Manufactured to exact factory dimensions, each...


Product#: 609833

1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Black

Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with black face finish, two generic logo keys, cylinder retainers,...


Product#: A20675

Nylon Rod Clip, Fits 5/32" Rod Diameter, RH, 1/4" Hole Size

Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...


Product#: PY024A

1970-71 Mopar; A-Body, B-Body; Ignition and Door Lock Set; With Original Style Keys

Complete set designed to replace your ignition and door lock assemblies. This lock set includes coded ignition and door locks with coded keys, pawls, clips and gaskets. New improved tooling. Includes original style keys and a...


Product#: TK129

1968 Camaro, 1967-68 Firebird Door, Glove Box and Trunk Lock Set with Late Style Key

This comprehensive kit will allow you to replace all the major lock cylinders (door, glove box and trunk) using just one pre-cut key. Each kit is a convenient and easy way of replacing your original locks without going...


Product#: TK275

1961-64 Chevrolet Impala / Full-size - Ignition/Door/Trunk Lock Set With Original Style Key

Lock set designed to replace your ignition, door and trunk lock assemblies. Each set is supplied with "coded" cylinders and 2 pre-cut keys which will fit the new door, ignition and trunk lock cylinders. Note:Set i s for...


Product#: TK289

1968 Camaro Ignition/Door/Glove Box/Trunk Lock Set with Original Style Keys

Complete set designed to replace your ignition, door, glove box and trunk lock assemblies. Each set is supplied with "coded" cylinders and 2 pre-cut keys which will fit all the new lock cylinders. Includes retainers, gaskets...


Product#: TK429

1964 Full Size Chevrolet 4 Door Ignition, Door, Glove & Trunk Lock Set With Original Style Key

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 short door lock cylinders 1 glove box cylinder 1 t runk lock cylinder 2 pre-cut...


Product#: TK1016

1958, 1961-64, 1970-78 GM; Door Lock Set; with 3/4" Long Shaft

Complete door lock set designed to replace old or won out lock assemblies on various GM models as listed. Each set is produced with 2 "coded" cylinders, gaskets, retainers, door lock pawls and 2 pre-cut keys. Note: Fits 1970...


Product#: TK1012A

1979-91 Ignition and Door Lock Set with Late Style Key

Complete set designed to replace your ignition and door lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and ignition cylinders. Includes door lock retainers and...


Product#: CL1101

1967-78 Door Lock Pawl; LH

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned. Applications: 1967-69 Camaro models 1970-78 Camaro models with short lock cyli nders...


Product#: CX1285

1967-72 Chevrolet, GMC Truck; Door Lock Pawl; RH Passenger Side

Reproduction door pawl to replace the damage or missing original on 1967-72 Chevrolet and GMC truck models. Each door lock pawl is manufactured in quality stamped steel replicating the original for an authentic appearance and...


Product#: G6881

1962-96 GM; Door Inside Locking Rod Clip; Various Models; Each

This authentic lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...


Product#: PY019C

1962-65 Dodge; Plymouth; Chrysler; A/B/C Body; Ignition and Door Lock Cylinder Set; with Original Style Keys; 3 Piece Set

This complete lock set is designed to replace your ignition and door lock assemblies. Each set comes complete with coded ignition and door locks with coded original style Mopar keys.


Product#: CX1284

1967-72 Chevrolet, GMC Truck; Door Lock Pawl; LH Driver Side

Reproduction door pawl designed to replace the damage or missing original on 1967-72 Chevrolet and GMC truck models. Each door lock pawl is manufactured in quality stamped steel replicating the original for an authentic...


Product#: TF400424

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Door Lock Rods; 2 & 4 Door, Sedan; Pair

Reproduction of the original inner door lock rods designed for use with 1955-57 Chevrolet Bel Air, 150, 210, Nomad 2 door, sedan models. Each rod is manufactured to correct factory specifications. The rods runs from the door...


Product#: TK821

1981-89 GM Uncoded Door Lock with Bright Face

Replace your old door lock cylinder with this uncoded assembly for 1981-87 models. Each lock cylinder is a correct replacement for your original. This uncoded lock cylinder is sold non-assembled. Sold individually. Gasket...


Product#: B9259

1961-64 Impala; Door Lock Knob Rod with Retainer Clip; Fits 2-door Hardtop and Convertible Models; LH or RH; 8"

Reproduction door lock knob rod for 1961-64 Chevrolet Impala 2-door hardtop and convertible models. This rod is manufactured to factory specs replicating the original 8" door lock rod. Includes retainer clip. Door lock knob...


Product#: TF400423

1955-57 Chevrolet Bel Air; Door Lock Rods; 2 Door, Hardtop; Pair

Reproduction of the original inner door lock rods designed for use with 1955-57 Chevrolet Bel Air, 2 door, hardtop models. Each rod is manufactured to correct factory specifications. The rod runs from the door lock knob to...


Product#: A1013

Door Lock Rod Clip

Replacement style clip for many different GM models including Camaro. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Door Lock Rod Clip

MSRP $1.99 ea
Classic $1.49 ea

Product#: 22050K

1952-67 Ford; Various Models; Door Lock Cylinders; With Keys

Reproduction of the original door lock cylinders designed to replace the old or worn our lock cylinders on the various Ford models listed below. Each lock cylinder includes a key that is pre-coded making installation easy!...


1965 Mustang GT; 1966 Mustang (All); Complete Lock Set; Ignition; Door; Trunk and Glove Box (Long Button); With Replacement Keys; One Key Fits All
NEW

Product#: PY1554CK3

1965 Mustang GT; 1966 Mustang (All); Complete Lock Set; Ignition; Door; Trunk and Glove Box (Long Button); With Replacement Keys; One Key Fits All

Reproduction complete lock set for 1965 Mustang GT and 1966 Mustang (all models). Manufactured to factory specifications, this comprehensive lock set is designed to restore proper function and original appearance to all...


Product#: GN110673

1986 GM Door and Trunk Key Blank "K" Code

Un-cut replacement key for the indicated code listed for 1986 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct letter code.


Product#: TK431

1966 Full Size Chevrolet Ignition, Door, Glove & Trunk Lock Set With Original Style Key

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 door lock cylinders 1 glove box cylinder 1 trunk l ock cylinder 2 pre-cut keys* 3...


Product#: 154883

1967-72 GM Truck; Premier Street Rods; Altman Latch; Factory Ext Door Handle

Never slam a door again, for increased safety and ease of operation, these latches work with "stock" external factory door handles. Made in USA


Product#: CL1127

1962-67 Chevy II / Nova Door Lock Pawl LH

Reproduction of the original lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned.


Product#: MD2660

1969 Mopar A-Body / B-Body Ignition / Door Lock Set With Replacement Keys

Complete set designed to replace your ignition and door lock assemblies. This lock set includes coded ignition and door locks with coded replacement keys, pawls, clips and gaskets. Note: Not for fiber-opticapplica tions....


Product#: TF401154

1955-57 Chevy Sedan Delivery; Rear Door Torsion Bars; Pair

Reproduction of the rear door torsion bars designed for use exclusively for 1955-57 Chevrolet Sedan Delivery models. Each tortion bar is manufactured to correct factory specifications featuring the correct length and contours...


Product#: TK1033

1970-73 Camaro Door / Glove / Trunk Lock Set with Long Shaft 3/4"

This set includes the correct replacement lock assemblies for the doors, glove box and trunk. Replace your rusted or missing originals with a complete new set! This set provides the coded lock assemblies along with pre-cut...


Product#: MD101

1968-70 Dodge, Plymouth B Body; Door Lock Knob Ferrules; Pair

Reproduction of the original door lock knob ferrules designed for use on 1968-70 Mopar B- body models. Each ferrule is manufactured in stamped stainless steel that replicates the original in quality and design. The ferrules...


Product#: 21999C

1966-71 Ford; Door Lock Knob Grommets ; Stainless Steel; With Felt Lining

Reproduction of the original door lock knob grommets that install on 1969-73 Mustangs with standard interior door panels. These stainless steel reproductions will help make your door panels look great. Replace the old worn...


Product#: TK106

GM Ignition and Door Lock Set with Late Style Key

Complete set designed to replace your ignition and door lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and ignition cylinders. Includes door lock retainers and...


Product#: MD2674

1970-74 Dodge, Plymouth E-Body; Door Lock Set, Non-Illuminated, With Original Style Keys

Replace your worn door locks with a coded door lock set complete with 2 coded lock cylinders, 2 OEM keys, lock pawls and retaining brackets. Applications: 1970-74 Barracuda 1970-74 'Cuda 1970-74 Challenger Note:Must use...


Product#: TK155

1968-79 Door, Glove And Trunk Lock Set With Late Style Key

This comprehensive set will allow you to replace all the major lock cylinders (door, glove box and trunk) using just one pre-cut key. Each set is a convenient and easy way of replacing your original locks without going...


Product#: PR932

1955-64 GM Full Size Passenger Car; 1956-66 Corvette; Door Lock Pawl Retainer Clip; Fits Original Door Lock Cylinders; Trident Shape; LH or RH

Reproduction door lock pawl retaining clip for various 1955-64 GM passenger car models. This trident shaped clip retains the door lock pawl to the door lock cylinder. This style clip is used with original GM door locks that...


Product#: K940

1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...


Product#: CL1112

1968-79 Door Lock Pawl; RH

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned. Fits 1968-79 models


Product#: TK109A

1967-68 Door Lock Set with Early Style Round Key

Complete set designed to replace your door lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys. Includes lock retainers and gaskets. Applications: 1967-68 Camaro models 1967-68 Firebird models...


Product#: TK337

1969-78 Nova, 1969-70 Full Size Ignition, Door, Glove & Trunk Lock Set With Late Style (Square) Key

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 door lock cylinders 1 glove box cylinder 1 trunk l ock cylinder 2 pre-cut keys* 3...


Product#: GN110672

1985 GM Door and Trunk Key Blank "H" Code

Un-cut replacement key for the indicated code listed for 1985 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct letter code.


Product#: GN110670

1983 and 1987 GM Door and Trunk Key Blank "B" Code

Un-cut replacement key for the indicated code listed for 1983 and 1987 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct...


Product#: LG2044

Billet Door Lock Knobs 10-24 Thread, OE Style, Machined Finish

LG Billet USA OE Style Billet Door Lock Knobs with a universal fit for multiple vehicle platforms with a 10-24 thread and are 2? tall. Made from 6061-T6 Billet Aluminum. These door lock knobs have been engineered and...