Product#: 1667194

1961-73 GM; Floor Pan Metal Plug; Oval; with Weld Hole; without Notches; Various Models

Reproduction oval metal floor pan and trunk pan plug used by General Motors on various 1961-73 models. Located on both the front and rear floor pans and the trunk floor pan, this plug is manufactured using heavy gauge steel...

Product#: 4805844

1960-75 GM; Rubber Plug; 1-1/16" Diameter; Fits 13/16" I.D. Hole; Various Models

Reproduction of the original type rubber plug that's designed for use on various locations in the vehicle. This plug is designed to keep air and water from entering specific areas that could cause problems, including the...

Product#: 4805843

1962-96 GM; Rubber Plug; 7/8" Diameter; fits 11/16" I.D. Hole; Various Models

Reproduction of the original type rubber plug that's designed for use on various locations in the vehicle. This plug is designed to keep air and water from entering specific areas that could cause problems, including the...

Product#: 153130

1962-65 Chevy II, Nova; Trunk Floor Drop Off Panel; LH Drivers Side

Reproduction of the original trunk floor drop off panel designed for use with 1962-65 Chevy II Nova models. Manufactured in stamped steel to original factory specifications replicating the original dimensions and design. This...

Product#: C3865

1962-67 Chevy II, Nova; Trunk Filler Extension; LH Drivers Side; EDP Coated

Reproduction of the original trunk filler extension designed for use with 1962-67 Chevy II and Nova models. Manufactured in quality stamped steel to OE factory specifications replicating the original in appearance and...

Product#: BP1260A

1968-72 Chevelle; GTO; Skylark; Cutlass; LeMans; 1970-72 Monte Carlo; Trunk Floor Pan; 1-Piece; 6" x 34"

Reproduction 1-piece partial trunk floor pan for 1968-72 Chevelle and other GM A-Body models. Each trunk floor is manufactured from stamped steel replicating the original in appearance and fitment. This replacement panel...

Product#: C3866

1962-67 Chevy II, Nova; Trunk Filler Extension; RH Passenger Side; EDP Coated

Reproduction of the original trunk filler extension designed for use with 1962-67 Chevy II and Nova models. Manufactured in quality stamped steel to OE factory specifications replicating the original in appearance and...

Product#: 9623791L

1968-72 Chevelle, GTO, Skylark, Cutlass, LeMans, Grand Prix; 1970-72 Monte Carlo; Trunk Floor Patch Panel; LH Side

Reproduction LH trunk floor patch panel for 1968-72 Chevelle, GTO, Skylark, Cutlass, LeMans, and Grand Prix models, as well as 1970-72 Monte Carlo. Manufactured from quality stamped steel to factory specifications, this panel...

Product#: B777267

1967-70 Impala / Full Size Trunk Pan Section; LH

Reproduction LH (driver's side) trunk floor pan section for 1967-70 full size Chevrolet models. This pan extends from the base of the upper trunk floor section to mid-rise of the rear floor section and must be welded in place...

Product#: B7774A

1965-66 Impala, Bel Air, Biscayne, Caprice; Partial Trunk Pan; RH Passenger Side; EDP Coated;

Reproduction of the original partial trunk pan area designed for use with 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each partial trunk pan is manufactured in stamped steel to original factory...

Product#: 1667337

1974-81 Camaro, Firebird; Trunk Floor Pan; EDP Coated

Reproduction of the original center trunk pan designed for use with 1974-81 Camaro and Firebird models. Each trunk pan is manufactured to factory dimensions in quality stamped steel replicating the original in appearance and...

Product#: B777467

1967-70 Impala / Full Size Trunk Pan Section; RH

Reproduction RH (passengers side) trunk floor pan section for 1967-70 full size Chevrolet models. This pan extends from the base of the upper trunk floor section to mid-rise of the rear floor section and must be welded in...

Product#: B7772A

1965-66 Impala, Bel Air, Biscayne, Caprice; Partial Trunk Pan; LH Drivers Side; EDP Coated

Reproduction of the original partial trunk pan area designed for use with 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each partial trunk pan is manufactured in stamped steel to original factory...

Product#: B9001A

1965-70 Impala, Bel Air, Biscayne, Caprice; Fuel Tank Mounting Brace; EDP Coated

Correct EDP coated* reproduction of the original fuel tank mounting brace designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne and Caprice models. This replacement brace attaches to the bottom of the trunk floor...

Product#: 14743A

1966 Impala, Bel Air, Biscayne, Caprice; Complete Trunk Floor Pan & Divider Panel; 2 & 4 Door; Hardtop, Convertible & Sedan; EDP Coated

Reproduction of the original trunk floor assembly designed for use with 1966 Chevrolet Impala, Bel Air, Biscayne and Caprice 2-door, 4-door, hardtop, convertible and sedan models. Each complete trunk pan assembly is...

Product#: B777367

1967-70 Impala / Full Size Center Trunk Pan Section

Reproduction center trunk floor pan section for 1967-70 full size Chevrolet models. This pan extends from the base of the upper trunk floor section to mid-rise of the rear floor section and must be welded in place to repair...

Product#: C138

1967-68 Camaro; Firebird; Center Trunk Floor Pan; 47-1/4" x 30-1/2"

Reproduction of the original center trunk pan designed for use with 1967-68 Camaro and Firebird models. Each trunk pan is manufactured in quality stamped steel and replicates the original design. Includes correct...

Product#: B7773A

1965-66 Impala, Bel Air, Biscayne, Caprice; Partial Trunk Pan; Center Section; EDP Coated

Reproduction of the original center trunk pan section for use with Chevrolet models, Impala, Bel Air, Biscayne and Caprice models. Each partial center trunk pan is manufactured in stamped steel to original factory...

Product#: TF400808

1955-57 Chevrolet Bel Air, 150, 210; Complete Trunk Floor; Without Bracing; Without Spare Tire Well Cutout; Standard Replacement

Reproduction 1-piece trunk floor panel for 1955-57 Bel Air, 150, 210 hardtop, sedan, and convertible models. Each panel is manufactured in quality stamped steel to correct factory configuration. Features correct gauge sheet...

Product#: TF400733A

1955-57 Bel Air, 150, 210; Complete Trunk Floor, for Spare Tire & Braces; Hardtop and Sedan; EDP Coated

Reproduction of the original style trunk floor assembly with spare tire for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Del Ray hardtop and sedan models. Each trunk floor panel is manufactured in...

Product#: C209L

1969 Camaro, Firebird; Trunk Lower Side Drop Down Panel Extension; LH Drivers Side

Reproduction of the original lower side drop down panel designed for use with 1969 Camaro and Firebird models. Each trunk side panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: B6514

1961-64 Impala / Full Size Lower Center Trunk Well

Classic Industries® now offers this superb reproduction of the original center trunk well section. This quality pan is manufactured to factory specifications allowing exact replacement of the rusted or damaged original...

Product#: B73562R

1965-66 Impala, Bel Air, Biscayne; Trunk Drop Off Filler Panel; RH Passenger Side; EDP Coated

Correct reproduction of the original trunk filler panel for use with 1965-66 Chevrolet Impala, Bel Air, and Biscayne models. Each trunk filler panel is manufactured in stamped steel to original factory specifications...

Product#: 11218BR

1964-70 Ford Mustang; Trunk Floor Pan; EDP Coated; LH

Reproduction of the original style floor pan manufactured in stamped steel for use with 1964-70 Mustangs. Each floor panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: B1003A

1965-70 Impala, Bel Air, Biscayne, Caprice; Trunk Divider Panel; Stamped Steel; except Station Wagon; EDP Coated

Reproduction of the original trunk divider panel for use on all 1965-70 Impala, Bel Air, Biscayne, and Caprice models except station wagons. Each trunk divider panel is manufactured in stamped steel to original factory...

Product#: E306

1970-73 Chevy Camaro; Trunk Drop Off Lower Side Panel; RH Passenger Side; EDP Coated

Reproduction of the original inner lower trunk drop off extension for use with 1970-73 Camaro models. Manufactured in quality stamped steel to correct dimensions including the trunk plug drain hole. This panel is located...

Product#: B73562L

1965-66 Impala, Bel Air, Biscayne; Trunk Drop Off Filler Panel; LH Drivers Side; EDP Coated

Correct reproduction of the original trunk filler panel for use with 1965-66 Chevrolet Impala, Bel Air, and Biscayne models. Each trunk filler panel is manufactured in stamped steel to original factory specifications...

Product#: 155162

1974-81 Camaro, Firebird, Complete Trunk Floor Pan; without Transition Panel

Reproduction trunk floor pan with fuel tank braces for 1974-81 Camaro and Firebird models. Each trunk pan is manufactured in stamped steel to factory specifications featuring correct contours, factory style design, and fuel...

Product#: TF400626

1955-57 Chevrolet Bel Air, 150, 210; Rear Trunk Floor Section

Reproduction rear trunk floor section for 1955-57 Chevrolet models. This repair panel runs from side to side of the trunk panel and goes in approximately 11-1/2" from the rear end of the trunk floor. Will not fit wagon...

Product#: E307

1970-73 Chevy Camaro; Trunk Drop Off Lower Side Panel; LH Driver Side

Reproduction of the original inner lower trunk drop off extension for use with 1970-73 Camaro models. Manufactured in quality stamped steel to correct dimensions including the trunk plug drain hole. This panel is located...

Product#: 152626

1961-64 Impala, Bel Air, Biscayne; Center Trunk Pan; with Lip; EDP Coated

Reproduction of the original center trunk well panel for 1961-64 Impala, Bel Air, and Biscayne models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: CM1001

1968-74 Nova, X-Body; Trunk Floor Drop Off to Quarter Panel Filler; LH Driver Side

Reproduction trunk to quarter panel filler for 1968-74 Chevy II, Nova and GM X-body models. Manufactured is quality stamped steel, this filler panel will replace the commonly rusted area from the inner trunk drop off to the...

Product#: MM1047A

1968-70 Coronet, GTX, Road, Runner, Satellite, Superbird, B-Body; Trunk Floor Pan; EDP Coated

Reproduction of the original trunk floor pan for use with 1968-70 Dodge and Plymouth B-Body models. This reproduction trunk floor pan is manufactured in quality stamped steel that features the original configuration,...

Product#: B1740B

1961-64 Impala, Bel Air, Biscayne; Upper Trunk Floor Panel; Bare Metal; USA Made!

Reproduction of the original upper trunk floor panel designed for use on 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each trunk floor panel is manufactured in bare stamped steel to original factory specifications...

Product#: 152875

1974-81 Firebird, Trans Am; Trunk Floor Drop Panel; RH Passenger Side; EDP Coated

Reproduction trunk drop off panel for 1974-81 Pontiac Firebird and Trans Am models. Each drop off panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: C2057

1969 Camaro, Firebird; Trunk Floor Reinforcement; Fuel Tank Brace; LH, Driver Side

This trunk floor reinforcement and fuel tank brace was originally welded under the center trunk pan for support and to form an attachment for gas tank straps. This superb quality reproduction is ideal for replacing a damaged...

Product#: 1700HGWT

1964 Impala, Bel Air, Biscayne; Full Trunk Floor Panel; with Shelf Pan; Silver Weld Thru Coating

Reproduction trunk floor and shelf pan assembly for 1964 Impala, Bel Air, and Biscayne models. Each trunk floor assembly is manufactured in stamped steel to correct factory specifications. The trunk floors feature correct...

Product#: B13280

1962-64 Impala / Full Size Trunk Floor Pan Extension; LH

Classic Industries® now offers this superb reproduction of the original trunk pan side section. This quality pan is manufactured to factory specifications allowing exact replacement of the rusted or damaged original. Made...

Product#: 11218AR

1964-70 Ford Mustang; Trunk Floor Pan; EDP Coated; RH

Reproduction of the original style floor pan manufactured in stamped steel for use with 1964-70 Mustangs. Each floor panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: CM4205

1962-67 Chevy II, Nova; Trunk Floor Brace; RH or LH

Reproduction of the original trunk floor brace for use with 1962-67 Chevy II and NOva models. Replace the rusted or damaged trunk floor braces on your 1962-67 Chevy II/Nova. This replacement brace attaches to the underside of...

Product#: 9623791C

1968-72 Chevelle, GTO, Skylark, Cutlass, LeMans, Grand Prix; 1970-72 Monte Carlo; Trunk Floor Patch Panel; Center

Reproduction center trunk floor panel for 1968-72 Chevelle, GTO, Skylark, Cutlass, LeMans, and Grand Prix models, as well as 1970-72 Monte Carlo. Manufactured from quality stamped steel to factory specifications, this panel...

Product#: 152874

1974-81 Firebird, Trans Am; Trunk Floor Drop Panel; LH Driver Side; EDP Coated

Reproduction trunk drop off panel for 1974-81 Pontiac Firebird and Trans Am models. Each drop off panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: 152887

1974-81 Camaro, Firebird; Complete Trunk Floor Pan; With Rear Seat Transition Panel

Reproduction trunk floor assembly for 1974-81 Camaro and Firebird models. Each trunk floor pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and...

Product#: MM1433

1971-74 Dodge Charger Trunk Floor Extension; RH

This factory style trunk floor extension is manufactured in OE gauge steel featuring all original contours and details and comes finished with a black electrophoretically deposited coating (EDP, or E-coat) for superior...

Product#: MM1071

1967-76 Mopar A-Body Trunk Floor Pan

This factory style replacement trunk floor pan is manufactured in OE-gauge steel with all new tooling featuring the original cutouts, contours, details and comes with a black electrophoretically deposited coating (EDP, or...

Product#: MM1425

1970-76 Mopar A-Body Trunk Floor Extension; RH

This factory style trunk floor extension is manufactured in OE gauge steel featuring all original contours and details and comes finished with a black electrophoretically deposited coating (EDP, or E-coat) for superior...

Product#: 14943

1970-73 Camaro, Firebird; Complete Trunk Floor Assembly; with Frame Rails; EDP Coated

Reproduction of the complete trunk floor and rear frame rails section designed for use with 1970-73 Camaro and Firebird models. Each trunk floor and frame rail section is manufactured in stamped steel to original factory...

Product#: MM1429

1968-70 Dodge B-Body Trunk Floor Extension; RH

This factory style trunk floor extension is manufactured in OE gauge steel featuring all original contours and details and comes finished with a black electrophoretically deposited coating (EDP, or E-coat) for superior...

Product#: MM1424

1970-76 Mopar A-Body Trunk Floor Extension; LH

This factory style trunk floor extension is manufactured in OE gauge steel featuring all original contours and details and comes finished with a black electrophoretically deposited coating (EDP, or E-coat) for superior...

Product#: GN110952R

1973-77 Chevelle, Malibu, Cutlass, Regal; Sprint; Trunk Floor; RH Passenger Side

Reproduction of the center trunk floor pan for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is manufactured in quality stamped steel to the...

Product#: 14943W

1970-73 Camaro, Firebird; Complete Trunk Floor with Frame Rails; Silver Weld-Thru Primer

Reproduction of the complete trunk floor and rear frame rails section designed for use with 1970-73 Camaro and Firebird models. Each trunk floor and frame rail section is manufactured in stamped steel to original factory...

Product#: MA822056

1967-69 Barracuda Trunk Floor Extension; LH

This factory style trunk floor extension is manufactured in OE gauge steel featuring all original contours and details and comes finished with a black electrophoretically deposited coating (EDP, or E-coat) for superior...

Product#: 14738A

1962 Impala, Bel Air, Biscayne; Trunk Weatherstrip Channel Set; EDP Coated

Reproduction of the original trunk weatherstrip side channels designed for use on all 1962 Impala, Bel Air and Biscayne models. Each weatherstrip channel set is manufactured in stamped steel to original factory specifications...

Product#: C209R

1969 Camaro, Firebird; Trunk Lower Side Drop Down Panel Extension; RH Passenger Side

Reproduction of the original lower side drop down panel designed for use with 1969 Camaro and Firebird models. Each trunk side panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: GN110952L

1973-77 Chevelle, Malibu, Cutlass, Regal; Sprint; Trunk Floor; LH Driver Side

Reproduction of the center trunk floor pan for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is manufactured in quality stamped steel to the...

Product#: M135B

1964-70 Mustang Coupe/Fastback; Rear Trunk Brace Support

Reproduction of the original rear trunk brace support designed for use with 1964-70 Mustang coupe and Fastback models. Each trunk brace support is manufactured in stamped steel to original factory specifications featuring...

Product#: C6834

1968-72 Chevy II, Nova; Center Trunk Pan; EDP Coated

Reproduction of the original trunk pan originally installed on 1968-72 Chevy II and Nova models. Replace your existing rusted out trunk pan with this excellent quality reproduction. Each trunk pan is manufactured to factory...

Product#: B1716A

1963-64 Impala, Bel Air, Biscayne; Outer Trunk Floor Panel; Coupe & Sedan; EDP Coated

Reproduction of the original outer trunk floor panel designed for use on 1963-64 Impala, Bel Air and Biscayne models. Each trunk floor panel is manufactured from quality stamped steel to the original factory contours for an...

Product#: B1746W

1965-70 Impala, Bel Air, Biscayne, Caprice; Upper Trunk Floor Brace; LH Drivers Side; Silver Weld-Thru Coating

Reproduction of the original trunk side brace for 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. This brace mounts under the upper trunk floor at the outer edge, next to the wheelhouse. Each brace is...

Product#: C2480

1970-73 Camaro, Firebird; Fuel Tank Brace Set; 4 Piece Set; EDP Coated

Reproduction of the original fuel tank brace set designed for use with 1970-73 Camaro and Firebird models. Each fuel tank brace is manufactured in stamped steel to original factory specifications featuring correct contours...