Product#: B7774A

1965-66 Impala, Bel Air, Biscayne, Caprice; Partial Trunk Pan; RH Passenger Side; EDP Coated;

Reproduction of the original partial trunk pan area designed for use with 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each partial trunk pan is manufactured in stamped steel to original factory...

Product#: 152875

1974-81 Firebird, Trans Am; Trunk Floor Drop Panel; RH Passenger Side; EDP Coated

Reproduction trunk drop off panel for 1974-81 Pontiac Firebird and Trans Am models. Each drop off panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: BP1260A

1968-72 Chevelle; GTO; Skylark; Cutlass; LeMans; 1970-72 Monte Carlo; Trunk Floor Pan; 1-Piece; 6" x 34"

Reproduction 1-piece partial trunk floor pan for 1968-72 Chevelle and other GM A-Body models. Each trunk floor is manufactured from stamped steel replicating the original in appearance and fitment. This replacement panel...

Product#: B7772A

1965-66 Impala, Bel Air, Biscayne, Caprice; Partial Trunk Pan; LH Drivers Side; EDP Coated

Reproduction of the original partial trunk pan area designed for use with 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each partial trunk pan is manufactured in stamped steel to original factory...

Product#: B11021

1963 Impala, Bel Air, Biscayne; Trunk Filler Panel; LH Drivers Side; EDP Coated

Correct reproduction of the original trunk filler panel for use with 1963 Impala, Bel Air and Biscayne models. Each trunk filler panel is manufactured in quality stamped steel to original factory specifications featuring...

Product#: B7773A

1965-66 Impala, Bel Air, Biscayne, Caprice; Partial Trunk Pan; Center Section; EDP Coated

Reproduction of the original center trunk pan section for use with Chevrolet models, Impala, Bel Air, Biscayne and Caprice models. Each partial center trunk pan is manufactured in stamped steel to original factory...

Product#: MM1262

1968-70 Mopar B-Body (Except Charger) partial Trunk Floor Panel; LH

This replacement panel is a good way of getting rid of rust when replacing the entire floor is not necessary. Features the correct contours, drain plug holes, and a black electrophoretically deposited coating (EDP, or E-coat)...

Product#: MD2114

1960-76 Dodge/Plymouth; Rubber Body and Trunk Plug; 1-7/8"; Each

Reproduction of the original style body and trunk rubber plug designed for use on most 1960-76 Dodge or Plymouth models where a 1-7/8" hole plug is required. Manufactured in quality rubber material for an original appearance,...

Product#: 1667194

1961-73 GM; Floor Pan Metal Plug; Oval; with Weld Hole; without Notches; Various Models

Reproduction oval metal floor pan and trunk pan plug used by General Motors on various 1961-73 models. Located on both the front and rear floor pans and the trunk floor pan, this plug is manufactured using heavy gauge steel...

Product#: TF400626

1955-57 Chevrolet Bel Air, 150, 210; Rear Trunk Floor Section

Reproduction rear trunk floor section for 1955-57 Chevrolet models. This repair panel runs from side to side of the trunk panel and goes in approximately 11-1/2" from the rear end of the trunk floor. Will not fit wagon...

Product#: B1740A

1961-64 Impala, Bel Air, Biscayne; Upper Trunk Floor Panel; 2 Door Hardtop; with Braces; EDP Coated

Note: Shipped truck freight.

Product#: 591112G

1963-65 Ford / Mercury; Trunk Floor Extension Panels; Falcon, Comet

Reproduction trunk floor extension panel set for 1963-65 Ford Falcon and Mercury Comet models. These replacement drop-off panels are manufactured from 19 gauge sheet metal specifically for this application. The trunk floor...

Product#: C138

1967-68 Camaro; Firebird; Center Trunk Floor Pan; 47-1/4" x 30-1/2"

Reproduction of the original center trunk pan designed for use with 1967-68 Camaro and Firebird models. Each trunk pan is manufactured in quality stamped steel and replicates the original design. Includes correct...

Product#: C6834

1968-72 Chevy II, Nova; Center Trunk Pan; EDP Coated

Reproduction of the original trunk pan originally installed on 1968-72 Chevy II and Nova models. Replace your existing rusted out trunk pan with this excellent quality reproduction. Each trunk pan is manufactured to factory...

Product#: C109L

1967-68 Camaro, Firebird; Trunk Lower Side Drop Down Panel Extension; LH Drivers Side

Reproduction of the original lower side drop down panel designed for use with 1967-68 Camaro and Firebird models. Each trunk side panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: B777267

1967-70 Impala / Full Size Trunk Pan Section; LH

Reproduction LH (driver's side) trunk floor pan section for 1967-70 full size Chevrolet models. This pan extends from the base of the upper trunk floor section to mid-rise of the rear floor section and must be welded in place...

Product#: 153820

1962 Impala, Bel Air, Biscayne; Trunk Filler Panel; LH Driver Side

Reproduction of the original trunk filler panel, also known as the trunk drop-off panel, for 1962 Chevy Impala and full-size models. This panel connects the trunk pan to the lower quarter panel area. Manufactured in quality...

Product#: C6835

1968-72 Chevy II / Nova Trunk Pan Side Panel Extension RH

Reproduction of the original trunk extension located between the trunk floor pan and the lower side extension drop offs. Each extension fits the original or reproduction trunk pan. Each section measures 12 wide x 31 long....

Product#: BP1259A

1968-72 Chevelle; GTO; Skylark; Cutlass; LeMans; 1970-72 Monte Carlo; Trunk Floor Pan; One Piece; 47" x 34"

Reproduction 1-piece partial trunk floor pan for 1968-72 Chevelle and other GM A-Body models. Each trunk floor is manufactured from stamped steel replicating the original in appearance and fitment. This replacement panel...

Product#: 9623791L

1968-72 Chevelle, GTO, Skylark, Cutlass, LeMans, Grand Prix; 1970-72 Monte Carlo; Trunk Floor Patch Panel; LH Side

Reproduction LH trunk floor patch panel for 1968-72 Chevelle, GTO, Skylark, Cutlass, LeMans, and Grand Prix models, as well as 1970-72 Monte Carlo. Manufactured from quality stamped steel to factory specifications, this panel...

Product#: MM1437A

1971-74 Plymouth B-Body Trunk Floor Extension; RH; EDP Coated

Reproduction of the original trunk floor extension designed for use with 1971-74 Plymouth B-Body models. Often rusted out or damaged, this panel installs in the area on the sides of the trunk pan where the trunk pan drops off...

Product#: 14742W

1963 Impala, Bel Air, Biscayne; Trunk Floor; Wheelhouse & Seat Shelf Assembly; Silver Weld-Thru Coating

Reproduction of the original trunk floor assembly and rear seat shelf area designed for use with 1963 Chevrolet Impala, Bel Air and Biscayne models. Each complete assembly is manufactured in stamped steel to original factory...

Product#: *R8502

1969 Camaro / Firebird Basic Trunk Sheet Metal Floor Pan Kit without Reinforcements

Reproduction trunk panels are designed and manufactured using original factory specifications giving the finished product a factory original appearance while maintaining originality. The trunk section is often corroded or...

Product#: TE7

1960-63 Ford Falcon; Trunk Side Extender Filler Boards; Fiberboard; Pair

Reproduction of the original type trunk extender / filler boards for use with 1960-63 Ford Falcon models. These boards fit on either side of the trunk and fill the gap between the floor and the upper quarter panel. They are...

Product#: TR11215A1

1973-79 Ford F-Series Pickup/Bronco; Bed Floor Patch Panel; F-100 / F-150 / F-250 / F-350 / Bronco

Reproduction stamped steel bed floor patch panel for 1973-79 Ford F-Series styleside pickup, and 1978-79 Bronco models. Each panel measures 48" x 16" and is designed to be welded into the floor to repair badly rusted or...

Product#: MM1263

1968-70 Mopar B-Body (Except Charger) partial Trunk Floor Panel; RH

This replacement panel is a good way of getting rid of rust when replacing the entire floor is not necessary. Features the correct contours, drain plug holes, and a black electrophoretically deposited coating (EDP, or E-coat)...

Product#: MM1264

1971-73 Mopar B-Body partial Trunk Floor Panel; LH

This replacement panel is a good way of getting rid of rust when replacing the entire floor is not necessary. Features the correct contours, drain plug holes, and a black electrophoretically deposited coating (EDP, or E-coat)...

Product#: RD78ER

1978-88 Regal, Monte Carlo, Cutlass, Grand Prix; Trunk Floor Side Extension; w/Body Mount Brace; RH Passenger Side

Replace rusted or damaged trunk floor components with this reproduction trunk floor side extension and body mount brace for 1978-1988 Cutlass, Monte Carlo, and Grand Prix models. Manufactured from stamped steel to replicate...

Product#: M438A

1971-73 Mustang; Trunk Pan Repair Panel; 54" w x 31" L

Authentically reproduced trunk repair panel designed for use with 1971-73 Ford Mustang models. This stamped steel panel features the correct ribbing, dimensions, and stamped impressions just like the original factory trunk...

Product#: 4805843

1962-96 GM; Rubber Plug; 7/8" Diameter; fits 11/16" I.D. Hole; Various Models

Reproduction of the original type rubber plug that's designed for use on various locations in the vehicle. This plug is designed to keep air and water from entering specific areas that could cause problems, including the...

Product#: 152626

1961-64 Impala, Bel Air, Biscayne; Center Trunk Pan; with Lip; EDP Coated

Reproduction of the original center trunk well panel for 1961-64 Impala, Bel Air, and Biscayne models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: 4805844

1960-75 GM; Rubber Plug; 1-1/16" Diameter; Fits 13/16" I.D. Hole; Various Models

Reproduction of the original type rubber plug that's designed for use on various locations in the vehicle. This plug is designed to keep air and water from entering specific areas that could cause problems, including the...

Product#: CM1002

1968-74 Nova, X-Body; Trunk Floor Drop Off to Quarter Panel Filler; RH

Reproduction trunk to quarter panel filler for 1968-74 Chevy II, Nova and GM X-body models. Manufactured is quality stamped steel, this filler panel will replace the commonly rusted area from the inner trunk drop off to the...

Product#: MD2113

1960-76 Dodge/Plymouth; Rubber Body And Trunk Plug; 1-1/8"

Reproduction body / trunk plug used on most 1960-76 Dodge or Plymouth models where a 1-1/8" hole plug is needed. Manufactured of rubber for original appearance, fit and function. Sold individually. Use as required.

Product#: CM1001

1968-74 Nova, X-Body; Trunk Floor Drop Off to Quarter Panel Filler; LH Driver Side

Reproduction trunk to quarter panel filler for 1968-74 Chevy II, Nova and GM X-body models. Manufactured is quality stamped steel, this filler panel will replace the commonly rusted area from the inner trunk drop off to the...

Product#: 153827

1968-74 Chevy II, Nova; Trunk Floor Drop Off End Cap; RH; Passenger Side; EDP Coated

Reproduction of the original trunk floor drop off end cap designed for use with 1968-74 Chevy II, Nova and GM X-body models. Manufactured in quality stamped steel to OE factory specifications replicating the original in...

Product#: 9731275

1971-90 Camaro, Firebird, Impala, Nova; Trunk Floor Pan Steel Access Plug; Various Models

Reproduction rear cross rail and trunk floor access plug originally installed on 1971-81 Camaro, Firebird, and other GM models as listed. Plugs are manufactured in steel to factory dimensions and will replace the original...

Product#: 153826

1968-74 Chevy II, Nova; Trunk Floor Drop Off End Cap; LH; Drivers Side; EDP Coated

Reproduction of the original trunk floor drop off end cap designed for use with 1968-74 Chevy II, Nova and GM X-body models. Manufactured in quality stamped steel to OE factory specifications replicating the original in...

Product#: B1003A

1965-70 Impala, Bel Air, Biscayne, Caprice; Trunk Divider Panel; Stamped Steel; except Station Wagon; EDP Coated

Reproduction of the original trunk divider panel for use on all 1965-70 Impala, Bel Air, Biscayne, and Caprice models except station wagons. Each trunk divider panel is manufactured in stamped steel to original factory...

Product#: *R8501

1967-68 Camaro / Firebird Deluxe Trunk Sheet Metal Floor Pan Kit with Reinforcements

Reproduction trunk panels are designed and manufactured using original factory specifications giving the finished product a factory original appearance while maintaining originality. The trunk section is often corroded or...

Product#: 152874

1974-81 Firebird, Trans Am; Trunk Floor Drop Panel; LH Driver Side; EDP Coated

Reproduction trunk drop off panel for 1974-81 Pontiac Firebird and Trans Am models. Each drop off panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: 14739A

1963-64 Impala, Bel Air, Biscayne; Trunk Weatherstrip Channel Set; EDP Coated

Reproduction of the original trunk weatherstrip side channels designed for use on all 1963-64 Impala, Bel Air and Biscayne models. Each weatherstrip channel set is manufactured in stamped steel to original factory...

Product#: B11027

1964 Impala, Bel Air, Biscayne; Trunk Filler Panel; LH Drivers Side; EDP Coated

Correct reproduction of the original trunk filler panel, also referred to as the trunk drop off area designed for use with 1964 Impala, Bel Air and Biscayne models. Each trunk filler panel is manufactured in quality stamped...

Product#: E502

1974-81 Camaro; Trunk Drop Off Lower Side Panel; RH

Reproduction of the original inner lower trunk drop off extension for use with 1974-81 Camaro models. Manufactured in quality stamped steel to correct dimensions including the trunk plug drain hole. This panel is located...

Product#: C109R

1967-68 Camaro, Firebird; Trunk Lower Side Drop Down Panel Extension; RH Passenger Side

Reproduction of the original lower side drop down panel designed for use with 1967-68 Camaro and Firebird models. Each trunk side panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: E501

1974-81 Camaro; Trunk Drop Off Lower Side Panel; LH

Reproduction of the original inner lower trunk drop off extension for use with 1974-81 Camaro models. Manufactured in quality stamped steel to correct dimensions including the trunk plug drain hole. This panel is located...

Product#: B11028

1964 Impala, Bel Air, Biscayne; Trunk Filler Panel; RH Passenger Side; EDP Coated

Correct reproduction of the original trunk filler panel, also referred to as the trunk drop off area designed for use with 1964 Impala, Bel Air and Biscayne models. Each trunk filler panel is manufactured in quality stamped...

Product#: B1716A

1963-64 Impala, Bel Air, Biscayne; Outer Trunk Floor Panel; Coupe & Sedan; EDP Coated

Reproduction of the original outer trunk floor panel designed for use on 1963-64 Impala, Bel Air and Biscayne models. Each trunk floor panel is manufactured from quality stamped steel to the original factory contours for an...

Product#: 11218BR

1964-70 Ford Mustang; Trunk Floor Pan; EDP Coated; LH

Reproduction of the original style floor pan manufactured in stamped steel for use with 1964-70 Mustangs. Each floor panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: B1740B

1961-64 Impala, Bel Air, Biscayne; Upper Trunk Floor Panel; Bare Metal; USA Made!

Reproduction of the original upper trunk floor panel designed for use on 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each trunk floor panel is manufactured in bare stamped steel to original factory specifications...

Product#: C209L

1969 Camaro, Firebird; Trunk Lower Side Drop Down Panel Extension; LH Drivers Side

Reproduction of the original lower side drop down panel designed for use with 1969 Camaro and Firebird models. Each trunk side panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: TF400627

1955-57 Chevrolet Center Trunk Floor Section

Reproduction center trunk floor section for 1955-57 Chevrolet models. Die stamped with correct impressions and contours. Overall dimensions are 36-1/2" x 34". Made in the USA. Note: Shipped double oversize.

Product#: B73562L

1965-66 Impala, Bel Air, Biscayne; Trunk Drop Off Filler Panel; LH Drivers Side; EDP Coated

Correct reproduction of the original trunk filler panel for use with 1965-66 Chevrolet Impala, Bel Air, and Biscayne models. Each trunk filler panel is manufactured in stamped steel to original factory specifications...

Product#: B6514

1961-64 Impala / Full Size Lower Center Trunk Well

Classic Industries® now offers this superb reproduction of the original center trunk well section. This quality pan is manufactured to factory specifications allowing exact replacement of the rusted or damaged original...

Product#: B73562R

1965-66 Impala, Bel Air, Biscayne; Trunk Drop Off Filler Panel; RH Passenger Side; EDP Coated

Correct reproduction of the original trunk filler panel for use with 1965-66 Chevrolet Impala, Bel Air, and Biscayne models. Each trunk filler panel is manufactured in stamped steel to original factory specifications...

Product#: B7772W

1965-66 Impala, Bel Air, Biscayne; Partial Trunk Pan; LH Drivers Side; Silver Weld Thru Coated

Reproduction of the original center trunk pan section for use with Chevrolet models, Impala, Bel Air, Biscayne and Caprice models. Each partial center trunk pan is manufactured in stamped steel to original factory...

Product#: B7773W

1965-66 Impala, Bel Air, Biscayne, Caprice; Partial Trunk Pan; Center Section; Weld-Thru Coating

Reproduction of the original center trunk pan section for use with Chevrolet models, Impala, Bel Air, Biscayne and Caprice models. Each partial center trunk pan is manufactured in stamped steel to original factory...

Product#: 14739W

1963-64 Impala, Bel Air, Biscayne; Trunk Weatherstrip Channel Set; Silver Weld-Thru Coated

Reproduction of the original trunk weatherstrip side channels designed for use on all 1963-64 Impala, Bel Air and Biscayne models. Each weatherstrip channel set is manufactured in stamped steel to original factory...

Product#: GN110950

1973-77 Chevelle, Malibu, Cutlass, Regal; Trunk Floor Kit; 8 Piece Set; with Brackets & Gas Tank Braces

This is an 8 piece reproduction of the trunk floor pan with braces and fuel tank braces for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is...

Product#: E307

1970-73 Chevy Camaro; Trunk Drop Off Lower Side Panel; LH Driver Side

Reproduction of the original inner lower trunk drop off extension for use with 1970-73 Camaro models. Manufactured in quality stamped steel to correct dimensions including the trunk plug drain hole. This panel is located...