Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: 14379

1962-67 Chevy II, Nova; Accelerator Throttle Arm; Converts 6 Cylinder to V8

Quality replacement style accelerator throttle arm for use with 1962-67 Chevy II Nova models for use when converting from a 6 cylinder engine to a V8 engine. This is the arm that runs from the accelerator pedal rod at the...

Product#: MN2228

1970-74 Dodge, Plymouth; B &E-Body; Accelerator Throttle Cable; with 400, 426, 440; 20"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth B and E body big block (400, 426, 440) models as listed. Each cable is manufactured to correct factory specifications...

Product#: TF700440

1955-57 Chevy Bel Air, 150, 210, Nomad; Throttle Arm; with Bushings; V8

Reproduction of the original throttle arm designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad 8 cylinder models. The throttle arm is manufactured in stamped steel to factory dimensions and replaces the...

Product#: D1950

Street Demon; Throttle Solenoid Set

Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel Systems includes the solenoid, bracket, and mounting nut....

Product#: 3923539

1968-69 327, 350 Carb to Accelerator Lever Rod; Small Block with 4 bbl Carb

Reproduction 1968-69 accelerator pedal rod for 327 or 350 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...

Product#: 9784A

1964-66 Ford; Accelerator Linkage Rod; 6 Cylinder 170, 200

Correct reproduction accelerator linkage rod for 1965-66 Mustang models equipped with the 6 cylinder engine. The linkage rod is a two piece set that connects the accelerator rod to the carburetor. Manufactured to correct...

Product#: D1951

Street Demon; TPS Set

When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal...

Product#: 3749084

1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel

OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...

Product#: MN2225

1968-70 Charger, Coronet, GTX, Satellite, Road Runner; Throttle Cable; with Hemi; 19-3/4"; OER

Reproduction of the original throttle cable designed for use with 1968-70 Dodge Charger, Coronet, Super Bee, and Dodge, Plymouth B-Body Hemi models. Connect the accelerator linkage to the carburetor with this original style...

Product#: TF800162

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: 3923549

1965-69 Impala, Bel Air, Chevelle, El Camino, Camaro, Nova; Carb to Accelerator Lever Rod; Big Block 396; with 4 bbl Carb

Reproduction of the original 1968-69 accelerator pedal rod designed for use with 396 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is...

Product#: 3959113

1969 Chevrolet Camaro; Accelerator Throttle Arm; V8; with Cowl Induction Hood

Reproduction of the original accelerator throttle arm designed for use with 1969 Chevrolet Camaro models that included a cowl induction hood. This is a correct reproduction of the original GM throttle lever arm. Manufactured...

Product#: PY4206

1971-74 Trans-Am Throttle Cables

These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.

Product#: C938531

1968-69 Firebird; Accelerator Pedal Lever; with V8 or 6 cyl.

Reproduction of the original accelerator pedal lever Pontiac used on 1968-69 Firebird models with either a 6 cyl. or 8 cyl. engine. This lever mounts at the firewall with the accelerator pedal mounting to one end and the...

Product#: SR4006

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Single Hole - Brushed

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets only fit Holley, Edelbrock, AFB, Quadrajet, Demon, & In-Line...

Product#: SR4011

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 2 Holes - Brushed

Brushed Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4018

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Brushed

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: D1952

Street Demon; Throttle Rod Adapter; For Mechanical Linkage

This throttle rod adapter removes the guesswork when installing a Street Demon carburetor using mechanical linkage in almost any carbureted GM application. All brackets have a clear zinc coating for corrosion protection and...

Product#: SR4012

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: SR4008

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Single Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: SR4009

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Dual Hole - Black

Black Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4013

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 2 Holes - Black

Black Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: 154214

1955-1970 Accelerator Throttle Lever Arm Pinch Bolt Kit

Correct reproduction accelerator throttle lever to pedal rod pinch bolt kit, includes (1) 1/4-20 x 1-1/4" grade 5 bolt, nut & washer. GM Full Size passenger car applications: 1955-1970 Camaro applications: 1967-1969 Chevy...

Product#: SR4007

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Dual Hole - Brushed

Brushed Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: MN2237

1970-74 Mopar B & E-Body Accelerator Throttle Cable; with Six Pack

Reproduction of the original accelerator throttle cable designed for use on 1971-74 Mopar B-Body and 1970-74 E-Body models with Six Pack engines (6-bbl). This cable connects the accelerator linkage to the carburetor....

Product#: TF800158

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: TF800159

1985-91 TPI Engines Lokar Throttle Cable Bracket with Double Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle and Kickdown cable. Made in USA

Product#: TF800160

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Brushed Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: TF800161

1985-91 TPI Engines Lokar Throttle Cable Bracket with Single Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Made in USA Also available: 2 hole for throttle and kickdown 3 hole for throttle,...

Product#: TF800163

1985-91 TPI Engines Lokar Throttle Cable Bracket with Triple Hole and Polished Finish

This billet aluminum cable bracket from Lokar mount to the side of your TPI intake plenum and allow you to install your Throttle, Kickdown, and Cruise Control cable. Made in USA

Product#: 3923551

1968-69 Camaro Z28 Carb to Accelerator Lever Rod; 302 4 bbl

Reproduction accelerator pedal rod for 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...

Product#: 9A702E

1964-67 Mustang; V8-2V; Accelerator Rod/Linkage Kit

Reproduction of the original 1964-67 Mustang accelerator rod with hardware. This accelerator rod kit is designed to fit 1965-67 289 2V Mustangs. Kits includes accelerator linkage rod, bushings, clip kit, and return spring.

Product#: 3923503

1968-69 Camaro, Nova; Accelerator Throttle Arm V8; 307ci, 350ci, 396ci; w/o Cowl Induction

Reproduction of the original throttle arm designed for use on 1968-69 Camaro and Nova models. Each throttle arm is produced to replicate the original in quality and fit. Replace your worn out or damaged original throttle arm...

Product#: PP002

1962-67 Chevy II, Nova Throttle Arm ; Small Block ; V8

Reproduction of the original throttle arm designed for use with 1962-67 Chevy II and Nova models with small block V8 engines. Manufactured in stamped steel replicating the original arm. This quality replacement includes the...

Product#: C30733

1961-64 Firewall Throttle Pedal Linkage

Reproduction firewall throttle pedal linkage or 1961-64 full size Chevrolet. Includes center pivot and upper and lower linkage.

Product#: MN1300

Gen III Hemi Torqueflite Throttle Pressure System

The latest updated designed product for Gen III Hemi's has remedied the problem of not having any mechanical throttle activation, from which to make throttle pressure systems work with all 1962 and later 904/727 Torqueflite...

Product#: MP180141

1964-74 Dodge Dart; 1966-74 Dodge Charger; Various Mopar A, B, C & E-Body; Throttle Cable Bracket Grommet

Reproduction of the original Throttle Cable Bracket Grommet for your 1964-74 Dodge Dart, 1966-74 Dodge Charger and other Various Mopar A, B, C & E-body vehicleswill replace your old and worn out or missing unit.

Product#: TF700447

1955-57 Chevrolet Throttle Linkage And Pedal To Firewall Mounting Hardware

Reproduction throttle linkage bolts and washers for 1955-57 Chevy models. Designed to mount throttle linkage to the firewall. Worn hardware should replaced to prevent sticky accelerator linkage. Also mounts the accelerator...

Product#: HWC14867

1968-73 Dodge; Plymouth; 340, 440ci Six Pack Carburetor Linkage Set; Center Carburetor to Outboard Carburetors

Excellent reproduction of the throttle linkage kit required to connect the center to the outboard carburetors on both 340 and 440 Six Pack and Six Barrel applications. Correct tapered design throttle rods, correct 3-piece...

Product#: 14318

1968-69 Camaro; Crossram Throttle Rod; Accelerator Pedal Rod

Reproduction crossram throttle rod or accelerator pedal rod for 1968-69 Camaro models equipped with the optional Crossram induction system. This unique linkage rod mounts to the accelerator pedal at the firewall and attaches...

Product#: TF700441

1955-57 Chevrolet 6 Cylinder 3 Piece Carburetor Linkage Clip Set

Reproduction carburetor linkage clips for 1955-57 Chevy models. Designed for 6 cylinder applications. Worn or missing clips should be replaced to ensure trouble-free operation. 3-piece set.

Product#: E284

1968-69 Camaro; Gas Pedal Throttle Set; 5 Piece Set

Reproduction of the original gas pedal throttles and hardware designed for use with 1968-69 Camaro models. Each set includes the gas pedal arm, bushing, throttle arm, and grommet for a complete replacement of the throttle. 5...

Product#: 9A702

1965-68 Mustang; Accelerator Rod; from Shaft to Bellcrank; 260, 289, 302

Reproduction of the original accelerator rod set designed for use with 1964-67 Mustang models. Each rod is manufactured to factory specifications for proper fitment and function. For use with 260, 289, 302 engines.

Product#: TF700442

1955-57 Chevrolet 6 Cylinder 4 Piece Carburetor Linkage And Passing Gear Clip Set

Reproduction carburetor and passing gear linkage clips for 1955-57 Chevy models. Designed for 6 cylinder applications. Worn or missing clips should be replaced to ensure trouble-free operation. 4-piece set

Product#: A9700101

1969-72 Camaro, Firebird; Throttle Solenoid Switch Retaining Clip; Cowl Induction, Shaker Hood

Correctly finished and accurate reproduction of the original throttle solenoid switch retaining clip for use with 1969 Camaro models. Manufactured with the correct diameter for proper installation. For.60" diameter switches...

Product#: 3924414

Accelerator Cable Ball Stud

Replacement accelerator cable ball stud for models that require a 1/4"-20 thread with.25" dia. ball and.98" overall length.

Product#: TF700545

1957 Chevrolet V8 Fuel Injection accelerator Rod Set

Fuel injection accelerator rod. Installs from the firewall to the fuel injection unit. Made from steel.

Product#: A9100219

1967 Camaro; Accelerator Lever Throttle Arm; Big Block

Reproduction of the original accelerator lever throttle arm designed for use specifically with 1967 Camaro big block (396) models. Each arm is manufactured to exact factory specifications replicating the original arm in...

Product#: A582064

1958 Chevrolet Passenger Car; Accelerator Pedal Rod Boot

New reproduction accelerator pedal rod boot for 1958 Chevrolet passenger cars. This rubber boot covers the connection point between the accelerator pedal linkage rod and the firewall. It acts as a seal to prevent dirt, dust...

Product#: PY4216

1970 Firebird, Trans Am; Accelerator Lever Cable; 350, 400, 455 HO, or Ram Air

Reproduction accelerator lever cable for 1970 Firebird and Trans Am models with 350, 400, 455 HO or Ram Air. This cable extend from the accelerator to the throttle arm. If your original cable shows signs of fraying or...

Product#: 836468

1929-1931 Chevrolet; Carburetor Accelerator Boot

Replace a worn or missing accelerator pump dust boot with this quality reproduction neoprene boot for 1929-31 Chevrolet vehicles equipped with original Carter RJH-08 updraft carburetors. Designed to help protect the...

Product#: 9789456

1967 Firebird; Accelerator Throttle Arm; V8; 326ci, 400ci

Correct reproduction of the original accelerator throttle arm designed for use on 1967 Pontiac Firebird V8 models. Manufactured in stamped steel to OE specifications, each throttle arm features correct contours that provide...

Product#: CB5379F

1967 Firebird; Quadrajet Throttle Arm; For V8

Reproduction 1967 Pontiac Firebird throttle lever arm, also known as the carburetor lever extension. This is the throttle arm bracket that is used only on 1967 Firebird V8 equipped models with 4 barrel Quadrajet carburetor....

Product#: PY4205

1975-79 Firebird Throttle Cables With Pontiac Engine

These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.

Product#: PY4207

1977-81 Firebird Throttle Cables With 301 Engine

These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.

Product#: PY4208

1978-79 Firebird Throttle Cables With 403 Engine

These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.

Product#: 94L353

1986-93 Ford Mustang; Throttle Cable; Stock Replacement

Replace a worn or damaged accelerator cable with an all new accelerator cable Y-1303. Designed as a direct-fit replacement, this cable restores smooth, precise throttle operation while matching the fit and function of the...

Product#: 94L354

1982-85 Ford Mustang, Mercury Capri; Throttle Cable; Stock Replacement; 20-1/4" Long

Replace a worn or damaged accelerator cable with ATP Automotive accelerator cable Y-188. Designed as a direct-fit replacement, this cable restores smooth, precise throttle operation while matching the fit and function of the...

Product#: 94L355

1983-86 Ford Mustang, Mercury Capri; Throttle Cable; Stock Replacement; 22-3/4" Long

Replace a worn or damaged accelerator cable with ATP Automotive accelerator cable Y-223. Designed as a direct-fit replacement, this cable restores smooth, precise throttle operation while matching the fit and function of the...