Classic Industries Restoration Parts and Accessories - Performance Ignition

MSD TFI ignition coil for 1986-95 Mustang 5.0L models. This coil has a unique turn ratio (85:1), lower primary resistance than factory coil, produces more output voltage and will work with stock ignition systems. {specs} ...

This performance ignition module is a direct replacement for GM computer controlled distributors. This module provides enhanced high RPM performance and increase spark plug voltage. Engineered with low saturation for maximum...

Direct OEM replacements that exceed OEM specs. Works with any fuel injection, turbo chargers or aftermarket headers with no stereo noise. Increases power to the spark plug up to 400% over stock wires. Improves gas mileage...

Eliminate points and wear-prone moving parts while delivering twice the stock voltage to the spark plugs. The Ignitor fits completely inside the distributor with no complex wiring, leaving no unsightly black box to clutter up...

Eliminate points and wear-prone moving parts while delivering twice the stock voltage to the spark plugs. The Ignitor fits completely inside the distributor with no complex wiring, leaving no unsightly black box to clutter up...

Eliminate points and wear-prone moving parts while delivering twice the stock voltage to the spark plugs. The Ignitor fits completely inside the distributor with no complex wiring, leaving no unsightly black box to clutter up...

Eliminate points and wear-prone moving parts while delivering twice the stock voltage to the spark plugs. The Ignitor fits completely inside the distributor with no complex wiring, leaving no unsightly black box to clutter up...

The Ignitor II detects electrical current in the coil and uses a micro controller to increase or decrease dwell to maintain peak energy as RPM and operating conditions change, providing more energy, reducing misfires, and...

The Ignitor II detects electrical current in the coil and uses a micro controller to increase or decrease dwell to maintain peak energy as RPM and operating conditions change, providing more energy, reducing misfires, and...

The Ignitor II detects electrical current in the coil and uses a micro controller to increase or decrease dwell to maintain peak energy as RPM and operating conditions change, providing more energy, reducing misfires, and...

If you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily...

OEM ignition coil for LS3 V8. 8 required per vehicle.

OEM ignition coil for LS1 V8. 8 required per vehicle.

The Mallory HyFire ignition box features a retro case filled with modern electronics that connect easily to points, amplifiers and magnetic pickup distributors. These capacitive discharge ignitions supply multiple sparks at...

The Street Fire Capacative Discharge ignition is perfect for performance enthusiasts with a tight budget. Capacative discharge will fire a series of multiple sparks that last for 20 degrees of crankshaft rotation when the...

Upgrade/replacement Ignitor III module for 8 cylinder automotive Pertronix billet distributors. These distributor modules are direct bolt-in replacements for your Pertronix Flame Thrower III distributor. Installed easily and...

Reproduction of the original ignition switch wiring pigtail is perfect when replacing the ignition switch and ignition cylinder. Runs from ignition switch to the harness. Features correct color-coded wiring and pigtail...

An excellent reproduction of the original 12 volt black body, yellow top ignition coil that Ford used on various models from 1957-74 including 1964-73 Mustangs. Easily Installed in the factory location and will fit and...

When you retro-fit a Ford 4.6L or 5.4L (SOHC/DOHC) with a carbureted intake manifold, you will need this controller to handle the ignition chores. The Controller plugs into the coil packs and sensors of the engine for a...

Replacement Unilite ignition module for Mallory breakerless distributors. Fits all series Mallory Unilite distributors except 42, 50 & 57. Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil. ...

Replacement hi-voltage 60,000 volt chrome ignition coil is just what you’ll need to keep your breaker-point ignition system operating efficiently and looking good. Includes 1.4ohm resistor.

The 6LS-2 Ignition Controller allows you to map a timing advance curve, as well as program a two-step rev limiter, a vacuum advance curve, and even a step retard in case you want to add nitrous to the mix. The 6LS-2 is...

This ignition start button kit is perfect for any Mustang enthusiast. Fits 2005-2009 Mustangs.

Distributor Cap & Rotor Set For over 30 years, ACCEL has been manufacturing distributor caps, rotors, points and condensers for racing applications world-wide. As a direct result of this racing involvement, ACCEL engineers...

This is a replacement four pin ignition module for Ready To Run electronic distributors MN2521 and MN2522.

Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.

Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.

Don't let the compact size of the Blaster SS Coil fool you because it is packed with performance. The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact,...

When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance...

MSD's new Digital 6A is the base model of the capacitive discharge multiple spark 6 Series design. Like all of the MSD 6 Series Ignitions, the 6A will work with virtually any vehicle as long as it has a 12-18 volt...

This ignition wire loom separator kit includes 6 dividers with the blue Ford Oval embossed on each one. Official Licensed FORD Product.{fitment}

Replacement coil cover for MSD # 8362 Street Fire Distributor or stock GM HEI distributor. {fitment}

The new Digital 6AL shares the same upgraded circuitry of the Digital 6A with the addition of a built-in adjustable rev limiter with two top mounted rotary dials to set the rev limit at 100 rpm increments. The combination of...

Steel mounting bracket used to mount ignition coil. Chrome plated.

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 5, 6 and 7 Series Ignition, the Blaster Coil is the right choice. The Blaster 2 Coil shares the same special windings and high...

Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.

Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.

The Mallory HyFire Pro features 535 primary volts and up to 135 millijoules of spark energy with multiple spark technology that burns for 20° of crankshaft rotation, ensuring every cylinder in your engine is making maximum...

Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.

Custom cut ignition wires for 1986-87 turbo models. Manufactured like OEM in the similar grey color with black special long silicone plug boots. Heavy-duty wires, tight-grip neoprene nipples, heat-treated terminals and custom...

Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.

If your vehicle is equipped with a GM factory HEI distributor, upgrade to MSD components during your next tune-up. You'll enjoy increased performance, longer life and maximum dependability. Note:Replacement module for MSD...

Keep your ignition wires under control with this pair of 4 wire separators. Each blue separator is mounted on a chrome steel arm to keep the wires from laying across your engine, where heat can break down your ignition wire...

Ford Dura-Spark electronic ignition conversion kit for any small block Ford powered vehicle with a points type distributor. This kit includes all new, OE quality components for reliable fit and performance. The advantages of...

If your vehicle is equipped with a V8 engine with a GM factory distributor, upgrade to Accel components during your next tune-up. You'll enjoy increased performance, longer life and maximum dependability. {specs} {fitment}

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper...

If your vehicle is equipped with a V8 engine with a GM factory distributor, upgrade to Accel components during your next tune-up. You'll enjoy increased performance, longer life and maximum dependability. Fits 1990-95 with...

If your vehicle is equipped with a V8 engine with a GM factory distributor, upgrade to Accel components during your next tune-up. You'll enjoy increased performance, longer life and maximum dependability. {specs} {fitment}